Latches & Catches
Trunk Lid Latch
We've seen this neat little latch showing up on some of the most eye-catching rods. Cable release ready receiver measures 2-3/8" x 3-5/16" wide. The spring loaded stud is 2-3/4" long, overall, and the adjustable spring loading helps to pop the trunk lid up. The latch has a built-in safety feature requiring cable tension for the latch to close. The finish is zinc yellow chromate. You'll have to fabricate brackets/supports for attaching both pieces but we know you can do it! |
 |
| #D04 Trunk Lid Latch w/Stud |
$50.00 |
Trunk/Hood Latch and Striker
This little beauty is called a Rotary Claw Latch. It's spring loaded, "slams" shut just like a bear claw latch and can be used in a variety of applications like trunks and hoods. It is 1.8" high from the mounting surface to the top, 1.25" from the mounting surface to the striker center and the attachment holes are 3.25" center-to-center. The finish is zinc yellow chromate. Latch has cable release mechanism below the mounting surface. Striker included. |
 |
| #D03 Trunk/Hood Latch and Striker |
$35.00 |
Deck Lid/Trunk Latch
We ran across this compact little latch and knew that
some of you would need it. The main rectangular
part of its body measures 2" x 2-5/8" x 5/8" thick
(total maximum thickness is 1-1/8") and has two
through holes for mounting. The white arm is a cable
pull release. Our gear motor actuator #L29 will work
this latch, if you want to go electric.
|
 |
| #D05 Deck Lid/Trunk Latch |
$110.00 |
|
