Other Lights
Lil' Hot Dots LED Bolts
Just how cool does it get? Effect lighting
for inside or out. 4-LED cluster in an aluminum bolt. Bolt is a
1/2-20 x 1" thread, the head is 15/16" Dia. x about 1/2" high. Nut and
lock washer included. Single function lights (one intensity). Choose
from Green (soft), Red or Amber (bright).
Waterproof. |
 |
| #L62 G/R/A (12vdc, each) |
$25.00 |
Make any of the #L62 lights into a dual
intensity light. Use as a running light plus auxiliary turn or brake.
| #L-JE03 (one per light needed, each, not shown) |
$5.00 |
"Large" Lil' Hot Dots LED Bolts
7-LED cluster aluminum bolt. Bolt is a 5/8-18x 1" thread, the head is 15/16" Dia. x about 1/2" high. Nut and lock washer included. Single function lights (one intensity). Choose from Green (soft), Red or Amber (bright). Waterproof. |
 |
| #L62LG G/R/A..... (12vdc, each) |
$35.00 |
Make any of these lights into a dual intensity light. Use as a running light plus auxiliary turn or brake.
| #L-JE02....(one per light needed, each, not shown) |
$5.00 |
Bright Blue Illuminator LED
An LED that's bright enough to use for illumination? YES! Leave it to StreetWorks to find it. Use this little beauty for lighting up your glove box or ash tray, add accent lighting inside or out (imagine putting one in each of the hood holes of an old Oldsmobile!) It's very small size makes it easy to snap into a .156" hole or just RTV
or epoxy in place. Pale blue color provides a nice hue at night. NOTE:
This LED is too bright for use as an indicator light! See our LED Indicators under Indicator Lights.
|
 |
| #L18BRB-5/32 (12vdc, each) |
$12.00 |
Bright White Illuminator LED
A little bigger and a little brighter than the Bright Blue LED. Use for interior accent lighting (not for courtesy or dome lights), license plate lights (2 minimum recommended), glove box, ash tray and a hundred other uses. It's small size makes it easy to snap into a 1/4" diameter hole or just RTV or epoxy in place. NOTE: This LED is too bright for use as an indicator light! See our LED Indicators
under Indicator Lights. |
 |
| #L18BRW-1/4 (12vdc, each) |
$12.00 |
Chrome Signal Lights
An industry standard, these chrome turn signal and park lights let you add needed visibility to your street rod, custom or VW rod. The small, single element lights measure 1-3/4" x 1-1/4" x 1-1/4" deep. Amber lens only. |
Actual parts may differ slightly from
photo. |
| #JE-SFL Single Filament (pair) |
$18.00/pr |
Make #JE-SFL work like a double filament light with our wiring conversion!
One per light needed. |
|
| #L-JE01 Conversion for JE-SFL (each) |
$5.00 |
The larger, double element light measures 2-1/2" x 1-3/4" x 2-1/2" deep. Amber lens.
| #JE-DFL Double Filament Lights (pair) |
$20.00/pr |
| #JE-1157SP Bulb for #JE-DFL (each) |
$2.00 |
Clear Lens Dome Light
A great looking Dome Light, 6-7/8" x 4-1/4",
with a 1" high profile from the mounting surface. Mounts on a flat
rigid surface and requires a cutout for clearance. Bulb, bulb
terminals and 24" prewired leads included. Beige plastic housing can
be upholstered or painted if primed with a plastic primer. Switch not
included, use with door switches, headlight switch dome feature and/or
separate switch.
|
 |
| #L64 Dome Light (each) |
$25.00 |
Dual Map/Dome Light
A modern car feature for your favorite ride. Dual Map spot lights, each with its own on/off switch, included. 3-3/4" X 9-1/8" unit snaps into place - a hole template is provided.
24" pre-wired leads included. 'Titanium' colored plastic housing fits into most interior motifs.
|
 |
| #L77 Dual Map/Dome Light (each) |
$85.00 |
New Clear Lens Dome Light
A convenient size Dome Light, 6-3/8" x 3-1/4", with a 1" high profile from the mounting surface. Mounts by the lens snapping into place - requires a cutout for clearance. Bulb, bulb terminals and 24" pre-wired leads included. Beige plastic housing can be upholstered or painted if primed with a plastic primer. Switch not included.
|
 |
| #L78 Dome Light (each) |
$35.00 |
Chrome LED Frosted Lens Dome Light
A great looking LED Dome Light. 2-3/4" diameter round, chrome aluminum front bezel - very low profile when installed, just 0.165". Chrome plastic rear housing. 20 - bright white LED's shine through a 1-5/8" diameter frosted lens. Mounts on a flat rigid surface and requires a 1-7/8" cutout for clearance. Mounting "clip" included. 8" pre-wired leads included. 12 vdc.
Switch not included, use with door switches, headlight switch dome feature and/or separate switch.
|
 |
| #L81 Chrome LED Dome Light (each) |
$45.00 |
Black LED Courtesy/Utility Light
A very clean little LED Courtesy/Utility Light. Great for interior lighting, trunk or even under hood. Approximately 1-3/4" X 2-5/8" with Hot Rod black plastic housing. 4 - bright white LED's shine through a clear, diffused lens. (2) hidden mounting screws included. A 1-1/2" diameter clearance hole is required. Pre-wired leads included. 12 vdc. Switch not included.
|
 |
| #L80 Black LED Courtesy/Utility Light (each)............................................................... |
$12.00 |
Clear Lens Lights
Stylish lights for interior or decorative type use. 1-7/8" x 1-3/8", snap in from behind the panel. Lens body is internally plated for reflectivity, with twist in socket for use with #194 bulbs (clear
bulbs included). Waterproof, but not recommended for taillight or turn signal use. |
 |
| #L53N Clear Lens Lights (pair) |
$25.00 |
Adjustable Time "Delayed Off"
Courtesy Light Kit
Never step into a dark car again! Now you can have your courtesy lights stay on for an extended time after the door closes or they can be triggered to come on by your remote entry system, door unlock, alarm, etc., or BOTH! Our unit can be triggered by any number of positive or grounding signals. Delayed off is adjustable from 1 to 120 seconds. Kit contains our exclusive timing module, underdash lights, high quality door switches, wire, connectors and instructions.
|
 |
| #L04T Timed Courtesy Light Kit |
$125.00 |
Timing Module only. Positive and/or grounding trigger compatible. Positive one (1) amp maximum output.
| #L04TM Timing Module Only (1 amp) |
$99.00 |
Courtesy Light Kit
The best selling kit of its kind on the market. It includes the lamp/brackets, wire, screws, connectors, and the best switches available - not cheap pin switches. Just follow the easy instructions. |
 |
| #L04 Courtesy Light Kit |
$33.00 |
| #L04A (without lamp assemblies/screws) |
$21.95 |
Lamp/bracket only - 1-wire, self grounding, lamp/bracket, bulb and screws.
If you want a kit to work with your OEM headlight switch - the dimmer or courtesy light ON feature that uses a grounding switch - you need this kit with two-wire bulbs.
| #L04G Courtesy Light Kit |
$33.00 |
Lamp/bracket only - 2-wire, not self grounding, lamp/bracket, bulb and screws.
Tilt Switch
Use a tilt switch to turn on lights in your glove box, trunk, or under-hood. When it tilts, the light come on. Just 1/2" square x 1" long with industrial adhesive for mounting.
|
 |
| #L02 Tilt Switch Only (1/2 amp Max.) |
$19.95 |
| #L03 Add a lamp/bracket, screws and connectors for a ready-to-install Trunk/Hood Light Kit. |
$24.95 |
Glove Box Switch
Nothin' fancy here, just a simple normally ON switch that turns off when pressed. Perfect to go with our Bright Blue Illuminator LED or as a replacement for your old switch. Mounts in a 1/4" dia. hole, rated 1.5 amps. |
 |
Ultra Bright Bulb
Replace your 1157, 1034 or
2057 bulb with an Ultra Bright bulb with 50 candlepower brake/turn light
(over 50% brighter) and 14 candlepower taillights (more than double!).
Be safe. Not for use with plastic lenses.
| #AA-5051 (each) ........... Just |
$4.00 |
|
 |
|
