Power Windows & Power Stuff
Finally ! Illuminated Billet, 5-wire Power Window Switches....... from Watson's StreetWorks, of course. Illumination comes through (2) small holes, one in each finger dimple to show you right where to put your pinkys. This is the max in styling and is adaptable to existing 5-wire switch wiring, but DO NOT assume identical plug or hole sizing to your existing switches.
Illuminated Billet 5-wire
Power Window Switch Kits
Image of Part #L39-5BT
Beautiful new Billet 5-wire rocker switch snaps into a rectangular billet frame that's only 1-1/4" wide by 2-5/16" high. The frame mounts with (2) blind studs from behind. Single switch with plug and frame, terminals, wire leads and instructions.
|
Dual switch kit for center console mounting or for both switches on the driver door only. (2) Billet 5-wire rocker switches snap into a dual switch frame that is 2-1/4" wide by 2-5/16" high. The frame mounts with (4) blind studs from behind. (2) switches with plugs and dual frame, terminals, wire leads and instructions.
Triple kit puts dual switches on the driver door and one on the passenger door. (3) switches with plugs, (1) single frame, (1) dual frame, terminals, fuse holder, wire leads, cross-over wiring and instructions.
Illuminated Billet 5-wire Power Window Switch Kits
For 4-door Cars
Our beautiful Billet 5-wire power window switches now in kits for 4-door cars. Choose from the complete 4-door kit or a single location (console) 4-door switch kit.
The Complete 4-Door Kit features a 4-switch drivers door control that measures 2-5/16" X 4-1/4" and (3) single switches that measure 2-5/16" X 1-1/4" wide for the other doors. Includes the cross-over wiring, switch plugs, terminals, fuses, fuse holders and instructions. The switch frames mount with blind studs from behind.
|
The Single Location 4-Door Kit
A single location (console) 4-door switch control that measures 2-5/16" X 4-1/4". Includes the switch plugs, feed wiring, terminals, fuses, fuse holders and instructions. The switch frame mounts with (4) blind studs from behind.
|
NOTE: For all of these 5-wire kits, you will have to provide the plug-to-motor lead wires. For #L39-5B4X that will be from the switch control on the console to, and into each door.
We believe that these are the very best power window switches and kits available. This is the max in styling and comes from Watson's StreetWorks .......of course. Don't be confused by "Copy-Cat" products We did it first and we do it best!
Illuminated Billet 5-wire Power Window
Switch Kit, 4-Switch 2-over-2 Design
Our beautiful Billet 5-wire power window switches now in a 2/2, 4-switch console design to run 4 different motors or a combination of items. The Single Location 4-Door Kit features a single location (console) 4-door switch control that measures 2-1/4" X 4". Includes the switch plugs, feed wiring, terminals, fuses, fuse holders and instructions. The switch frame mounts with (4) blind studs from behind.
|
 |
Also available as a custom switch panel that might combine power window controls, door lock/unlock, power trunk lift control, electric latch releases, etc. There are lots of possible combinations, so plan ahead and discuss it with our staff.
NOTE: For these kits you will have to provide the plug-to-motor lead wires from the switch control panel to, and into each door.
Combine Power Window, Door Lock, Electric Latch Release and/or Momentary Switching in these beautiful illuminated switch panels. The 3-switch panel is 3-1/4" wide X 2-5/16" high and the 2-switch panel is 2-1/4" wide X 2-5/16" high. May be used alone or together to achieve your results. For example: (1) Use one "5B3'' for a center console to run the driver power window,the passenger power window and to lock/unlock both doors. (2) Use one "5B3" for a center console to run the driver power window, the passenger power window and the third switch to unlatch each door separately. (3) Use one "5B3" and one "5B2" together so that the "5B3" runs the driver power window, the passenger power window and both doors lock/unlock; while the "5B2" runs the passenger power window and both doors lock/unlock. There are lots of possible combinations, so plan ahead and discuss it with our staff.
| #L39-5B2-CSTM |
$155.00 |
| #L39-5B3-CSTM |
$225.00 |
| Also in our new 4-switch Custom Panel, 4-1/4" wide X 2-5/16" high. |
|
| #L39-5B4-CSTM |
$270.00 |
Illuminated Billet 5-wire
Power Window Switch Kits
With Press Release Latch Release
Our beautiful Billet 5-wire power window switches now with the Press Release Manual Latch Release for Bear Claw style latches -all in one unit! Two switch driver side unit with crossover wiring measures 3-1/4" wide X 2-5/16" high, single switch passenger unit measures 2-1/4" wide X 2-5/16" high, witch plugs, terminals, fuses, fuse holder, cabling, hardware and instructions. The frames mount with blind studs from behind.
|
Illuminated Oval Billet 5-wire
Power Window Switch Kits
Image of Part #L39-5BOT
Light comes from (2) small holes in the finger dimples to show you right where to put your pinkies. Adaptable to existing 5-wire switch wiring, but DO NOT assume identical plug or hole sizing to your existing switches.
Beautiful new Billet 5-wire rocker switch snaps into an oval billet frame that's 2-11/16" wide by 1-15/16" high. The frame mounts with (2) blind studs from behind. Single switch with plug and frame, terminals, wire leads and instructions.
|
Dual switch kit for center console mounting or for both switches on the driver door only. (2) Billet 5-wire rocker switches snap into a dual oval switch frame that is 3-1/8" wide by 2-1/4" high. The frame mounts with (2) blind studs from behind. (2) switches with plugs and dual oval frame, terminals, wire leads and instructions.
Triple kit puts dual switches on the driver door and one on the passenger door. (3) switches with plugs, (1) single oval frame, (1) dual oval frame, terminals, fuse holder, wire leads, crossover wiring and instructions.
New Electrical Latch Release Switches
|
 
  |
| Our Power Window Switches modified for positive (+) output triggering for actuators or for use as remote control trigger switches, 6 amps maximum output. "Single" switches will operate (2) actuators/doors (Push left or right). "Double" switches are for 4-door use. May be used for other positive (+), momentary switching. |
| #L39-5BS-LR (Rectangular Frame "Single" switch) |
$80.00 |
| #L39-5BOS-LR (Oval Frame "Single" switch) |
$90.00 |
| #L39-5BD-LR (Rectangular Frame "Double" switch) |
$145.00 |
| #L39-5BOD-LR (Oval Frame "Double" switch) |
$155.00 |
Flamed Billet Frame Power Window Switches
Make your car really c-o-o-l with HOT flames!
Our Billet 3-wire rocker switch sits inside a flamed billet frame that's 4-1/4" wide by 1-5/8" high. Adapts directly to positive (+) output remotes - no additional relays required! Single switch and frame, polarity reversing module, wire leads and instructions.
|
SEE THE NOTE: below. Switches without modules will work for air-ride systems with separate up - down solenoids requiring a positive signal.
| #L39BFSX...................................................(single) |
$64.00 |
Double and Triple Flamed Switch Kits!
Image of Part #L39BFT
Double switch and frame puts 2 switches in a single 4-1/4" wide by 1-5/8" highframe, with 2 polarity reversing modules, wire leads and instructions. For mounting both switches in the driver door only or in a center or overhead console.
| #L39BFD |
$125.00 |
| Switches and Flamed Plate without modules. Order #L39BFDX (double) |
$113.00 |
Triple switch kit puts dual switches on the driver door and a single switch on the passenger door. Switches with frames , (2) polarity reversing modules, lots of wire, connectors and instructions.
The single and double flamed switches are also available as part of our "Custom" switches with On/Off, (Mom.)/Off, On/Off/On, or (Mom)/Off/(Mom) switches for other applications. These panels are sold without relays (panel, switches with 24" wire leads and hardware), the switch rating is 5 amps max., so be sure to explain your needs to our tech staff when ordering. We can set up almost any kind of functions that you may need.
| #L39BFSX-CSTM (Flamed Single) |
$64.00 |
| #L39BFDX-CSTM (Flamed Double) |
$113.00 |
|
"Vintage" Oval Billet 5-Switch Custom Panel
Designed in conjunction with our friends at Vintage Air, this gorgeous 5-Switch Billet Panel exactly matches the size of their Streamline Gen-II Pro Panel. It measures 5-1/2" wide X 2-1/2" high and is available with your choice of switch functions. Just let us know what you want to do and we'll set it up for you. The switches are rated 5 amps max. so any necessary relays are sold separately. Includes 24" leads and hardware. Our panel has a fine turned machine finish which you can easily polish...By you if so desired.
|
 |
Oval Billet Power Window Switches
Image of Part #L39BOT
Our Billet 3-wire rocker switch sits inside an Oval billet frame that's only 1-5/8" wide by 2-1/4" high. Adapt directly to positive (+) output remotes - no extra relays required! Single switch / frame, polarity reversing module, wire leads and instructions.
|
Dual switch kit for center console mounting or for both switches on the driver door only. Dual switch frame is 3-1/8" wide by 1-5/8" high, (2) polarity reversing modules, wire leads and instructions.
Triple kit puts dual switches on the driver door and one on the passenger door. Switches and frames, (2) polarity reversing modules, lots of wire and instructions.
| #L39BOT..............................................(shown) |
$180.00 |
NOTE: These are not plug-in replacements for 5-wire switches. Call if you have questions. Reversing modules are needed for power windows. Switches without modules will work for air-ride systems with separate up - down solenoids requiring a positive signal.
| #L39BOSX.........................(single) |
$64.00 |
| #L39BODX.......................(Double) |
$113.00 |
Oval Billet 4-Switch Panel
4 of our Billet 3-wire rocker switches mounted in an Oval billet frame that's 4-7/8" wide by 1-5/8" high. Use as a driver door control for power windows on a 4-door or as a stand-alone console switch center. NOTE: This panel is sold without relays or polalrity reversing module(s), so be sure to explain your needs to our tech staff when you order. AT LEAST ONE ADDITIONAL REVERSING MODULE will be needed when using this panel with other of our Oval Billet Power Window Switches listed above.
|
 |
| #L39BO4X (4 power window rocker panel) |
$199.00 |
Reversing Module for L39BO4X to match Oval Power Window Kits listed above.
Oval Billet Custom Switch Panels
 
 
Our distinctive Oval Switches can be used for a lot more than just power windows. We can custom make a panel for you that uses On/Off, (Momentary On)/Off, On/CenterOff/On, or (Momentary On)/CenterOff/(Momentary On) switches. Get a panel with one, two, three or four switches. Get combinations of panels to achieve whatever switching you may want to do. Just give our staff a call and explain your project... we'll set you right up! These panels are priced without relays (panel, switches with 24" leads and hardware), the switch rating is 5 amps max. |
| #L39BOSX-CSTM (Oval Single Panel (2-1/4" wide X 1-5/8" high) |
$64.00 |
| #L39BODX-CSTM Oval Double Panel (3-1/8" wide X 1-5/8" high) |
$113.00 |
| #L39BO3X-CSTM Oval 3-Switch Panel (4" wide X 1-5/8" high) |
$159.00 |
| #L39BO4X-CSTM Oval 4-Switch Panel (4-7/8" wide X 1-5/8" high) |
$199.00 |
| #L39BO4X (4 power window rocker panel) |
$199.00 |
AT LEAST ONE ADDITIONAL REVERSING MODULE will be needed when using these panels with other of our Oval Billet Power Window Switches listed above. Reversing Module for power windows, lock/unlock, etc.
Other relays can be found on the Brake Switch/Relay page or just ask when you call. We can provide almost any type of switching for you.
Console Plate Power Window Switch Kit
Our Billet 3-wire rocker switches inside an attractive Billet Console Plate that's 2-1/4" wide by 2-1/2" high with brushed finish. Add distinct styling in Billet to your custom console 2 switches, Console Plate, 2 polarity reversing modules, wire leads, connectors and instructions.
|
 |
SEE THE NOTE below #L39BT. Switches and Console Plate without modules for SPDT applications up to 5 amps max.
Rectagular Billet Power Window Switches
|
|
You asked for them...and here they are! Billet, round-end, 3-wire rocker switch sits inside a billet frame that's just 1-1/8" wide by 1-3/4" high. These switches adapt directly to positive (+) output remote controls with no additional relays required! Single switch and frame, polarity reversing module, wire leads and instructions.
The dual switch kit is intended for center console mounting or if you want both switches on the driver door only. Dual switches are 2" wide by 1-3/4" high frame, (2) polarity reversing modules, wire leads and instructions.
The 3 switch kit puts dual switches on the driver door and one on the passenger door. Switches and frames, (2) polarity reversing modules, lots of wire and instructions.
** ALL of our 3-wire Billet Switches are now also available in On/Off and Momentary On/Off versions. Please call for details and pricing.
Light Clip for L39B Switches
Now you can add illumination to any of our family of L39B Power Window and specialty switches. This Clip secures to the switch frame mounting screws and holds your choice of 5/32" size LED (sold separately). The LED shines between the billet rocker and face plate of the switch. We recommend using one clip each for Single or Double switches, use 2 on L39BO4X 4-switch panel (you may use one Clip/LED per switch if you wish to achieve maximum illumination).
|
 |
| #L39B-CLIP (each)..........................................................just |
$5.00 |
| #L18R/G/A-5/32, Red/Green/Amber LED (each) |
$4.00 |
| #L18B-5/32, Blue LED (each) |
$9.00 |
Power Window Switches for Original "Crank" Handles
Keep that original look and still install power windows in your ride with these switches. A slight push on the crank will open/close the window. Comes in either 3/8" square shank for Ford/Mopar or GM Splined shaft.
2-Door kit made by Carolina Custom.
|
  |
| #CA-EPWS-F (square shank) |
$130.00 |
| #CA-EPWS-GM (splined) |
$130.00 |
Power Window
"Down" Controls
Use our MagTech magnet control system to roll down your power window(s) as a means of entry. Simply roll the window down and reach in for the inside handle. Works with all popular 5-wire type window switches used in most kits.
|
 |
| #L20W (2 window set, shown) |
$89.95 |
| #L20WS (1 window set) |
$44.95 |
Want to use your own momentary switch? Get the relay that you need.
| #L-PWDR (for 1 window) |
$20.00 |
Specialty Power Window's
Wonder-Lift Window Kit
This is SPW's universal, flat glass kit including OEM motors, rugged risers, motor plug and leads, bottom window channels and mounting material, support brackets, written and video instructions. 8-1/2" clearance is needed below the bottom of the glass. Riser can be shortened for your application. Lifetime Warranty from Specialty Power Windows. 2-doors. Works with any of StreetWorks Power Window Switch Kits.
|
 |
Specialty Power Windows is known throughout the industry as the best source for power window kits and StreetWorks is proud to carry their product.
Power Door Locks
Caroline Custom's
They're constructed from aircraft quality aluminum and have stainless steel lock pins and mounting hardware for optimum performance and reliability. Slim 1-3/8" thick x 2" tall x 8" long. Built-in micro switches allows you to use a warning light (LED included). May be installed in doors or kick panel area. Great for suicide doors or if you have installed bear claw latches which cannot be locked otherwise.
|
 |
Manual Safety Lock Pins
Carolina Custom's Manual Safety Lock Pins. They're constructed from aircraft quality aluminum and have stainless steel lock pins and mounting hardware for optimum performance and reliability. Slim 1" thick x 2" tall x 3-1/2" long. Built-in micro switches allow you to use a warning light (LED included). May be installed in doors or kick panel area. Great for suicide doors.
|
 |
Billet Levers for Safety Locks
All of the power and manual safety locks come with a plastic lever for the manual release. But your car has all the billet goodies! Match it all up with these beautiful billet aluminum levers. Fit 1/4" shaft with set screw.
|
 |
Power Cowl Vent Kit
Give your cowl vent a lift with this powerful gear motor kit that comes complete with gear motor, brackets, hardware, interior switch, wire, connectors, and instructions. Steel bracket for cowl can be bolted or welded. Attractive 5" aluminum rod arm gives a clean look. Motor with mounting bracket and lever arm measure 2-1/2" wide, 4" high and 3-1/4" deep including motor, not including 5" connecting arm. Also works for power glove box door. Not waterproof.
|
 |
| #L34 Power Cowl Vent Kit |
$99.00 |
| #L34M Motor Only |
$50.00 |
Power Lift Kit
A Power Lift Kit for trunks, tonneaus or whatever your project might be. Attractive 250 pound force - 10 inch stroke industrial linear actuator provides direct push power and pull return. Stainless steel brackets attach with stainless shoulder bolts, nuts and screws for a clean, lasting appearance. Maximum total bracket rotation is about 90 degrees for each bracket.
A complete kit for the price of the actuator alone.
|
 |
| #L-PLK |
$299.00 |
| #L-PLKX Actuator Only |
$250.00 |
Power Trunk Lift Kit
New from Carolina Custom. Uses an industrial linear actuators for power - not just a window regulator. Works through a single pivot hole so there's no ugly slot in your trunk upholstery. Only the billet arms and trunk bracket show when installed. Has all the hardware, brackets, arms and switch. The steel frame is designed to be able to install on either side of the trunk.
|
 |
| #CA-PTL100 (100# actuator) |
$350.00 |
| #CA-PTL200 (200# actuator) |
$390.00 |
|
