Wiring Accessories
Basic Auto Electricity Book
Now in its 8th Printing !
If you're the type of person who can honestly say that you don't feel comfortable with electrical wiring, or if you can do it but would like to understand it all better, then this book is for you.
Contains sections on:
- What is Electricity? - covering the battery, alternator, voltage regulator, grounding and fuses
- Designing a simple circuit - selecting components, connectors & terminals, series and parallel circuits, relays
- Designing an Electrical System, doing circuit tracing
- Circuit Diagram
- Ammeter and Volt Meters - hook-up and how to read them
- Handy relay circuits, Quick Tips...And More!
A full 48 pages plus Foldout Circuit Diagram, Plus an
8-1/2" x 14" Pullout Wiring Diagram that you can remove and
customize to match your own car's circuits. Click Here to see a sample page from our book.
|
 |
The "Road Kill" Anti-Theft Timed Ignition Shutoff
What
kind of jerk would steal your ride? Want to make him feel like "Road
Kill "?
When our kit is turned on, it will allow the car to start and
run for just 10 seconds. Then all of a sudden the car stops dead and
your horn (or alarm horn, not provided) goes off! Deceptively lets him
think he's got it made then kills the ignition and blasts the horn to
get the world's attention like no car alarm will. Includes 10 second
timer, ignition relay, System On/Off toggle switch, horn feed (horn not
included) and instructions.
Make him feel like
"Road Kill"
|
 |
The 'Hot-Dot' All-in-One Ignition/Start/Stop Switch
Put your Ignition Switch and Starter all into one unit. This gorgeous chrome recessed switch is 3/4" diameter and has an LED ring to indicate when the ignition is "On". Push and hold the button while the starter turns over and release when the engine starts. The ignition stays "On". Push again to stop the engine. Clean, slick, neat, state-of-the-art.
|
 |
|
| #L75B/G/R The "Hot-Dot" |
$130.00 |
| Now with Blue, Green or Red LED! Blue, Green or Red LED Ring Indicates that Ignition is "On" |
|
Switch only-
For momentary or On/Off functions and either positive (+) or ground (-) switching, rated 1 amp maximum load. Specify Blue, Green or Red LED Ignition indicator.
| #L75SMB/G/R (Momentary) |
$49.00 |
| #L75SOB/G/R (On/Off) |
$49.00 |
Latching and Starter Relay sets - use with your own mom. grounding switch.
Latching Relay set only - for other latching applications.
Ask us about 1-switch Ignition / Start / Stop and Accessories!
Ignition Switch with Billet O-Ring Nut
We have seen a lot of really nice cars using the aftermarket ignition switch and the cast, ribbed nut that comes with it. That nut made the whole dash look cheap! So, let's fix that. Here is a quality ignition switch with 30 amp rating. Four positions -Accessory, Off, On and Start. 2 keys. Die-cast housing and mounting stem that's 3/4" diameter x 3/4" long. AND it has an attractive machined billet nut with decorative black O-ring. The perfect complement to our Contemporary Column nobs.
| #L47 Ignition Switch with O-ring Nut Only |
$29.00 |
|
 |
 |
You own one of those cars we were talking about and only need the nut and O-ring? No problem.
| #L47N Nut & O-ring (3/4-20 Thread) |
$12.00 |
|
Billet Aluminum Key-Cover
Stand out in the crowd with our Billet Key Cover. It fits our keys sold with parts #L47, L47S and V-IS. 2-piece construction sandwiches around the original key head and pins together. Measures 1-1/2" X 1-5/64" with 3/16" diameter key chain hole. Custom, one-off details without the price of one-off machining. Machined finish is easy for you to polish if desired.
|
| What's that? You like the way that cast, ribbed nut looks? O.K. then just get that quality switch with the regular nut.
| #L47S Ignition Switch with Standard Nut |
$19.00 |
|
 |
Ignition/Start Pull Switch
The first pull position is Ignition/Accessory, the second is a spring loaded Starter. The body of this switch measures 1-7/8" long X 1-1/8" wide X 3/4" high, not including terminals. The mounting stem is 3/8-24 thread and will accommodate panel thicknesses up to 3/16". The black plastic nob has a 10-32 thread so that you can add one of our billet dress-up nobs. The electrical ratings are: Acc. = 10 amps, Ign. = 5 amps, Start = 5 amps, so check out our 70 amp relay for your extra accessories. With installation hardware and instructions. |
 |
| #L71 (Ignition/Start Pull Switch) |
$35.00 |
Headlight Switch
This is a high quality GM switch complete with shaft, connector plug and terminals. Includes dome or interior light circuit, headlights, running lights and dash light dimmer. And now it comes with a tapered billet knob. (Not Shown)
|
 |
| #AA-HLS.........Great Price ! |
$25.00 |
Billet Switch Nut with O-Ring
Have that headlight switch match with our ignition switch by adding
a Billet Headlight Switch Nut with O-Ring. Perfect for part #AA-HLS, at above. Has 7/16 - 28 thread and .203 Dia center hole.
|
 |
|
Wiper Switch
A quality aftermarket windshield wiper switch, "two speed, three position - Off, Low and High. Universal symbol plastic knob, park terminal, 3/16" shaft. Use any of our 3/16" Dress-Up Knobs with this switch.
|
 |
Billet Wiper Switch Nut with
O-Ring
●Billet Wiper
Switch Nut with O-Ring. ●Matches our ignition switch and headlight switch
nuts. ●Fits our part #L-WS above 11-3/4" diameter x 1/4" thick with
7/16-28 internal thread.
|
 |
On-Off Pull Switch
Pull On, Push Off. This ain't rocket science, but it's a nice little switch. Rated 20 amps. Fits through a 1/2" Dia. hole. Comes with a black knob, but our 10-32 dress-up knob fit for a better look.
|
 |
Keylock Electrical Switch
For entry system shutoff, use our ON/OFF keylock, key removable in either ON or OFF positions. Mounts in 3/4" diameter hole with waterproof cover for outside use. Lock, 2 keys, wire leads, cover and instructions.
|
 |
| #L26 (Keylock, keys and cover, 15 amps max.) |
$22.95 |
Momentary Action Keylock Switch
A momentary action keylock switch. The key springs back to OFF when released, key removable in Off position only, with 2 keys and cover.
| #L26M (Keylock, keys and cover, 15 amps max) |
$33.00 |
Double Momentary Action Keylock Switch
A single-pole-double throw keylock switch to activate two different circuits. The key turns 45° right (one circuit) or left (second circuit) and springs back to OFF when released. Use for door locks, power windows, power trunk lift, etc. A polarity reversing module is probably needed, depending on exactly what you want to do. The key is removable in Off position only, with 2 keys and cover.
|
 |
| #L26DM (Keylock, keys and cover, 15 amp. max) |
$45.00 |
| Polarity Reversing Module #L07-W |
$33.00 |
Maxi Fuse-Link TM Kit
This kit allows you to replace the fusible links that normally protect the main power feeds from the battery and alternator with Maxi-Fuses. Perfect for rewiring jobs. Maxi fuses are easy to detect, easy to replace fuses. Our kit has 2 maxi-fuse holders with 8 ga. wire leads and waterproof covers, (3)-50 amp maxi fuses plus connectors and tie wraps. Also use for any high amperage add-on circuits.
|
 |
NOTE: Maxi fuses are not slow burn like fusible links.
| #L46 Maxi Fuse-Link Kit |
$25.00 |
| Maxi Fuse Holder Only. #L46H (each) |
$8.50 |
| Maxi Fuses #L46F50 (50 amp ea.) or #L46F70 (70 amp., ea.) |
$2.50 |
140 Amp Circuit Breaker
A great way to protect main power feeds. Easily resettable. Test button feature. Positive visual status (shown "tripped" in photo). Stud connections with water resistant caps, ring terminals and mounting screws included.
|
 |
ATO/ATC Fuse Holder
●Always
protect your add-on circuits with a fuse. ●30
amp max. ●fuse
holder for the standard size ATO/ATC blade fuses 12 gauge wire lead.
●Fully insulated
with water resistant cap.
|
 |
| #L46H-STD Standard size fuse holder....each |
$2.50 |
Sealed Beam Socket Kit
A fast and easy way to wire your headlights, park lights, and front turn signals. You get two sealed beam plugs with standard color code wire leads, 2-four connector terminal blocks (high beam, low beam, park light and turn signal), 16 ring crimp connectors, stainless screws and instructions. A COMPLETE KIT for amateur or professional alike.
|
 |
(2) terminal blocks with terminals and screws only.
Battery Power Jumper Studs
Extra heavy duty studs. Get just the positive stud and use a chassy ground connection or get both for direct connection. Solid brass contact post is 13/16" diameter x 1-1/8" long with marked, colored cover (red for +, black for -) Terminal stud is 3/8-16. Insulator requires a 1-1/4" hole to install.
|
 |
| #L37P (Pos) #L37N (Neg.) ea |
$19.00 |
Bracket for Power Jumper Studs
From our friends at Sachse Rod Shop. Galvanized 1/8" steel plate, 5" long with Jumper Stud holes and mounting holes and screws. Makes installation a no-brainer!
|
  |
Grounding Strip
1-1/4" x 5-3/4" Grounding Strip has a solid brass bus bar, (2) 1/4" studs with nuts and (10) #8-32 Screws for ground contacts. Plastic insulator base has two countersunk holes for mounting.
|
 |
6 Amp Diode
A six (6) amp rated diode for limiting current flow to one direction.
Excellent for fuse panel-to-alternator feed wire. Includes (2) butt
connectors, shrink tubing and instructions. |
 |
| #L-6A-DIODE ....................Only |
$3.00 |
|
