Battery Disconnects, Ignition, Ignition Security, WHAT'S NEW
300 Amp Battery Disconnect (BD-300-X)
Watson’s StreetWorks is now offering a battery cut-off that will handle the largest charging systems. Whether you are looking for a theft deterrent or a simple way to disconnect your battery, this is a great solution. This rugged new sealed unit is built for a continuous load of 300 amps and will handle 2,500 amps for a 10 second surge. Overloading a smaller battery disconnect will burn it out and leave you stranded. This new weatherproof unit measures 5” x 3 ¾” x 2” so hide it wherever you need to. The terminal ends can handle the largest cables. A low amperage bypass circuit keeps your clocks and computers alive. An output is included for an optional status light. Two switch options are available. Switch, hardware and instructions are included.
BD-300-T 300 amp disconnect with toggle switch ….$250.00
BD-300-R 300 amp disconnect with round rocker switch….$250.00SKU: n/a
Battery Disconnects, Ignition, Ignition Security, Remotes & Entry Systems
Battery Disconnect For Remote Controls (L27R)Battery Disconnects, Ignition, Ignition Security, Remotes & Entry Systems
Battery Disconnect For Remote Controls (L27R)
Use that extra remote control channel (just one momentary switch) to shut off the battery from outside the car. Push it once and the battery is connected. Push it again and the battery feed is disconnected. Includes our auxiliary “hot” feed to the clock or computer or other items requiring power for memory. The solenoid is rated 110 amps continuous duty and 750 amps surge. Hardware, wire, connectors and detailed instructions included. There is no electricity used when this unit is ON or OFF, only while switching. Remote not included.SKU: L27R
Ignition, Ignition Security
RFID Ignition Security Fob (WI-RFID)
This all new StreetWorks RFID is designed to work with your Hot Dot Ignition Systems or your existing key. This is the security system that your hot rod has been missing.
As you may already know the “HOT DOT” ignition takes the place of your conventional “keyed” ignition switch however it has no security built in. This all new RFID Security system gives you the security and convenience that today’s society demands.
What is RFID?
RFID stands for Radio-Frequency Identification. The acronym refers to small electronic devices that consist of a small chip and an antenna. The RFID device serves the same purpose as magnetic strip on the back of a credit card; it provides a unique identifier for that object. And, just as a magnetic strip must be scanned to get the information, the RFID device must be scanned to retrieve the identifying information.
The RFID unit has 3 different operating modes.
Mode 1: High security mode. The car only starts and stays running with the RFID fob in range.
Mode 2: Medium security mode. The RFID fob must be in range for car to start and will stay running until the operator turns it off, then it won’t restart.
Mode 3: NO security mode. Should your fob become lost or damaged you can over-ride the system by entering a code with the hidden button switch.
The RFID is capable of working between 5 and 200 feet with the vehicle’s windows closed. If the vehicle’s windows are open we do not have a measurement for how far away the unit will work. There are 8 increments of sensitivity that the unit can be programmed to.SKU: WI-RFID
Ignition, Ignition Security, Ignition Systems, Specialty Switches, Switches
MagnaKey for added security (32053)Ignition, Ignition Security, Ignition Systems, Specialty Switches, Switches
MagnaKey for added security (32053)
Add security to your Hot Dot Push button start. Our new “MagnaKey” will put a stop to anyone trying to drive off with your ride. Mount it in plain sight on the dash or hide it away from curious eyes. Without the MagnaKey your Hot Dot button is locked in position. Receptacle mounts in a ¾” hole, Bezel dia. is 7/8”. Requires 3” of clearance behind the mounting surface. 2 keys included along with detailed instructions.SKU: 32053
Ignition, Ignition Security, Ignition Systems, Relays & Flashers, Remotes & Entry Systems, Wiring
Hot Dot Ignition Link (TM) Hot Dot-to-Remote Control Interface Relay (L88)Ignition, Ignition Security, Ignition Systems, Relays & Flashers, Remotes & Entry Systems, Wiring
Hot Dot Ignition Link (TM) Hot Dot-to-Remote Control Interface Relay (L88)
A great way to mount our L75 series switches – put an Ignition switch and an Accessory switch side-by-side. The plate is 1″ wide x 2″ long and secures with the switch nuts. L75 switches sold separately. This Ignition Link Relay allows you to enable and disable your StreetWorks Hot Dot Ignition Button using two (2) functions on a Remote Control (such as our Gemini, 2-function or other remote control). Push one remote control button and the Hot Dot Ignition operates, press a second button and disable the Hot Dot. Takes the place of a keylock to secure your car’s ignition. May be triggered by either positive or negative (grounding) momentary trigger signals. Remote Controls and Hot Dot sold separately. Can also be used as a latching On/Off relay, 12 vdc, 5 amps maximum load.SKU: L88
Ignition, Ignition Systems, Switches
Ignition Switch with Billet O-Ring Nut (L47)
We have seen a lot of really nice cars using the aftermarket ignition switch and the cast, ribbed nut that comes with it. That nut made the whole dash look cheap! So, let’s fix that. Here is a quality ignition switch with 30 amp rating. Four positions -Accessory, Off, On and Start. 2 keys. Die-cast housing and mounting stem that’s 3/4″ diameter x 3/4″ long. AND it has an attractive machined billet nut with decorative black O-ring. The perfect complement to our Contemporary Column nobs.SKU: L47
Ignition, Ignition Systems, Specialty Switches, Switches, Wiring
Ignition/Start Pull Switch (L71###)
An old-time way to start your ride!
The first pull position is Ignition/Accessory, the second is a spring loaded Starter. The body of this switch measures 1-7/8″ long X 1-1/8″ wide X 3/4″ high, not including terminals. The mounting stem is 3/8-24 thread and will accommodate panel thicknesses up to 3/16″. The black plastic nob has a 10-32 thread so that you can add one of our billet dress-up nobs. The electrical ratings are: Acc. = 10 amps, Ign. = 5 amps, Start = 5 amps, so check out our 70 amp relay for your extra accessories. With installation hardware and instructions.SKU: L71###
Battery Disconnects, Ignition, Ignition Security
Magtech Battery Disconnect (L27M)
“Instant ON, Instant OFF” A simple wand-like swipe with the magnet “key” makes it that easy to disconnect your battery with our MagTech Battery Disconnect kit. A hidden switch is activated by the magnet key carried on your key ring. Great as an anti-theft deterrent or to prevent battery drain. Includes our auxiliary “hot” feed to the clock or computer or other items requiring power for memory. The solenoid is rated 110 amps continuous duty and 750 amps surge. Hardware, wire, connectors and detailed instructions included. There is NO electricity used when this unit is “on”, only when switching between on and off.SKU: L27M