brake light
Showing all 5 results
-
Hot Rod Exterior Lighting, Hot Rod Tail Lights
Flush Mounted LED Tail Light Strip
For integral or separate Turn Signals! Each light is split 40-20 so that the LED’s can be wired for either type of turn signal. 60 Super Bright Red LED strips inside aluminum housings. 1/4″ thick build-in, flush mounted red acrylic lenses with prismatic diffusers – can be fit into slightly curved fenders, roll pans and pickup bed corners up to 1/4″ for a seamless look (the acrylic lenses cannot be bent). Taillights have dual intensity for taillights and turn-brake lights. Need only 1″ of clearance space behind the mounting surface. Weld-in or glass-in studs for mounting are included. Quality instructions. Lenses are only 1/2″ wide by 15-1/4″ long! Note that these are build-in kits requiring paint and body skills.
SKU: L58 -
Hot Rod Exterior Lighting
Flush Mount Sequencing 60 LED 3rd Brake Light (L58B-SEQ)
Get their attention with our Sequencing 60 LED 3rd Brake Light. It’s split 10-10-20-10-10 and sequences inside-out once when the brakes are first applied then stays on solid. Flush mounting, build-in lens is 1/2″ wide X 15-1/4″ long.
SKU: L58B-SEQ -
Hot Rod Exterior Lighting, Hot Rod Tail Lights
One-Piece Flush Mount Hot Slot LED Taillight Kit (L68)
Hot Rod Exterior Lighting, Hot Rod Tail LightsOne-Piece Flush Mount Hot Slot LED Taillight Kit (L68)
THIS PRODUCT IS DISCONTINUED> We’ve put 120 super bright red LED’s into a single, one-piece taillight kit – single slot red lens measures 30-3/4″ long X 1/2″ wide to provide an uninterrupted, smooth look. Diffuser attached. Will work in surfaces with gradual curvature up to about 2-1/2″. The LED’s are dual intensity for taillights and brake/turn signals and are premounted into an aluminum housing. We also provide an aluminum “spacer box” to fill the gap created by body curvature and to seal out dirt and water – simply cut to the contour of the body. Weld-in or glass-in studs for mounting are included. Note that this is a build-in kit requiring extensive paint and body working skills.
SKU: L68 -
Hot Rod Exterior Lighting, Hot Rod Tail Lights
Small Billet Pedestal Third Brake Light with Turn Signals (Red Lens)(L61SM)
Hot Rod Exterior Lighting, Hot Rod Tail LightsSmall Billet Pedestal Third Brake Light with Turn Signals (Red Lens)(L61SM)
We’ve taken Pedestal 3rd Brake Lights to a new level! This gorgeous piece is 8-7/8″ wide, 3/4″ high (body), 1-1/8″ deep and only 2″ tall including the swivel base. 30 super bright red LED’s are split into 3 groups of 10-10-10 so that you have a 10 LED center 3rd brake light and (2)-10 LED turn signal/ brake lights. You could also add our LED Conversion Kits to get taillight and turn/brake or wire then all as one big and bright 3rd brake light.
SKU: L61SM -
Hot Rod Exterior Lighting
1157 LED Red Bulbs, pair (25012)
Finally, an 1157 LED replacement bulb that can be seen from all directions. It comes with 4 bright LEDs on the sides as well as the tip. It measures less than 2 ¼” long by ¾” wide. These LED replacements shine brighter than their original counterparts offering a visually appealing brightness. These LED lights will provide years of trouble free service. Sold in pairs.
SKU: 25012
