led
Showing 1–20 of 35 results
-
Hot Rod Interior Lights
LED Interior Light with Switch (L85)
A sweet little LED Interior Light. The lens measures just 7/8″ x 3″ and when you rotate the lens either way, the light turns on. It can also be externally switched. Install with the oval mounting flange showing (it’s 2-1/16″ x 5″) or hide it behind the mounting surface with just the lens showing. Needs about 1-1/4″ rear clearance. Screws included. Comes with a chrome bezel that covers the black plastic shown in the picture.
SKU: L85 -
Hot Rod Exterior Lighting, LED Hot Rod Headlights
LED Headlights (251##)
NSRA SAFETY PRODUCT OF THE YEAR 2014
NSRA NEW PRODUCT OF THE YEAR 2014
At every show we attended in 2013 people asked when we would carry LED headlights. We found an excellent product but the lens just looked wrong in most Rods and they were expensive. So we kept looking. By late fall we had a solution that we were testing. We started with a 7″ round glass lens and mated it to an H4 LED. This worked well and the bulb put out a lot of light but it was scattered all over the place. Rather than rush to market we kept looking and it was worth the wait! Finally we found this H4 LED bulb that we are offering here. With a distinct difference between Hi & Lo beams the crisp white light pattern is the best we’ve seen from this configuration. They draw less amps that your old bulbs and plug into your 3 prong socket so you don’t need to upgrade your wiring. Each bulb has a power controller which is permanently attached to the bulb / fan assembly. We’re thrilled to offer this LED headlight package at a realistic price.
These new 7” round Hella Vision Plus lenses use an advanced reflector design and conform to SAE/DOT standards for street and highway use.
7″ Round headlights with H4 style LED bulbs. The lenses have the 3 positioning tabs to make aligning them a snap. From the retaining ring they are 4 1/4″ deep so be sure your buckets will accept the bulb-fan assembly. 25101 Sold in pairs
7″ x 6″ rectangle headlights with H4 style LED bulbs. The lenses should fit right into your existing frames. They are 5″ deep with the LED bulbs in place. 25112 Sold in Pairs
H4 LED bulbs only. Put them into your existing H4 Lenses. 25145 Sold in pairs.
WARNING: Headlight buckets that have springs in the center of the bucket may not be able to accomodate this LED setup without modifications or installing new buckets. These LED bulbs willl not fit King Bee Buckets, and may require some modifications to fit Dietz buckets. Tri-Five vehicles will need to extend their headlight buckets.
SKU: 251## -
Hot Rod Exterior Lighting
Billet Frames L58 Series LED Lights (L58-FR)
If you aren’t into flush mounting taillight or 3rd brake light lenses into the body, these stunning machined billet aluminum frames work with our L58 kits to allow you to surface mount the lens on the outside of the sheet metal while the LED’s and housing attach to the inside. The large L58 Frame is 16-3/4″ long X just under 1″ wide. It will protrude .400″ off the surface. They accept our lenses perfectly (as shown). All other parts (lens, LED’s, housing, etc) are in the flush mount kits, just add these frames for flat surface mount installation. 3rd Brake Light kits need one frame, Taillight Kits need two frames.
SKU: L58-FR -
Hot Rod Exterior Lighting
Billet Frames for L58SM Series LED Lights (L58SM-FR)
If you aren’t into flush mounting taillight or 3rd brake light lenses into the body, these stunning machined billet aluminum frames work with our L58SM kits to allow you to surface mount the lens on the outside of the sheet metal while the LED’s and housing attach to the inside. The small L58SM Frame is 9″ long X just under 1″ wide. It will protrude .400″ off the surface. They accept our lenses perfectly (as shown). All other parts (lens, LED’s, housing, etc) are in the flush mount kits, just add these frames for flat surface mount installation. 3rd Brake Light kits need one frame, Taillight Kits need two frames.
SKU: L58SM-FR -
Hot Rod Exterior Lighting
Double-D LED Taillights (L58-DDR)
Double-D taillights with twice the diodes. Two strips of 60 Super Bright Red LED’s per light, inside an aluminum housing. 1/4″ thick build-in, flush mounted red acrylic lenses with prismatic diffusers. Each strip is split 40-20 and the strips are wired separately so that you may wire the strips together or not. Work with integral turn/brake systems or vehicles with separate turn signals. The lenses are 1/2″ wide x 15-1/4″ long. Mounting hardware and dual intensity convertors included.
SKU: L58-DDR -
Hot Rod Exterior Lighting, Hot Rod LED Backup Lights
Double-D LED Taillights with Bright White LED Backup Lights (L58-DD-BU)
Hot Rod Exterior Lighting, Hot Rod LED Backup LightsDouble-D LED Taillights with Bright White LED Backup Lights (L58-DD-BU)
Double-D taillights with twice the diodes – two strips of 50 super bright LED’s per light plus super bright white LEDs for backup lights all inside an aluminum housing. Build-in, flush mount clear acrylic lenses are 1/4” thick, 1/2” wide and 15-1/4” long plus diffuser. Each red strip is split 30-20 and are wired separately so that you can wire the strips together or not. Works with integral turn/brake systems or on vehicles with separate turn signals. Hardware and dual intensity convertors included.
SKU: L58-DD-BU -
Courtesy Lighting, Hot Rod Interior Lights
Interior Courtesy LED Light Kit with Low Profile Magnetic Jamb Switches (IL-04)
Courtesy Lighting, Hot Rod Interior LightsInterior Courtesy LED Light Kit with Low Profile Magnetic Jamb Switches (IL-04)
This is our new and improved courtesy light kit with “hidden” switches. This kit includes 2 of our 2″ cool white LED strips, 2 of our brand new magnetic door jamb switches, connectors, wire and instructions. Hide this slick 2 piece switch on the pillar and the other on the door. Both pieces are paintable and mount into a 3/4″ hole. The switch is rated at 2 amps and has a maximum working distance of 3/4″.
SKU: IL-04 -
Hot Rod Interior Lights, LED Dash Indicators
LED Indicator Lights (L18)
These “press in” LED indicator lights are small and easy to install. If your looking for a simple LED indicator that is not over powering to your dash then this is what you are looking for. There are 2 sizes available 5/32″ (0.156″) or 1/4″ (0250″) mounting hole.
SKU: L18 -
Hot Rod Exterior Lighting, Hot Rod Tail Lights
Small (7-1/2″) Amber Hot Slot LED Light Kit (L58SM-AMB)
Hot Rod Exterior Lighting, Hot Rod Tail LightsSmall (7-1/2″) Amber Hot Slot LED Light Kit (L58SM-AMB)
Build-in, flush mount LED Light Kit with amber LED’s and amber lenses. Super bright amber LED’s are premounted inside each aluminum housing. 1/4″ thick amber acrylic lenses with prismatic diffusers. Lights have dual intensity for use as running light and turn signal. Needs only 1″ of clearance space behind the mounting surface. Weld-in or glass-in studs for mounting are included. Lenses are 1/2″ wide X 7-1/2″ long.
SKU: L58SM-AMB -
Hot Rod Exterior Lighting, Hot Rod Tail Lights
Small Sequential LED Taillights (L58SM-SEQ)
Our #L58SM taillights above, but three steps better. Each light is split into three groups of 10 LED’s that sequence inside-out with the turn signals. Brake lights quickly sequences once then all stay on. All the necessary convertors, an electronic flasher and sequencing modules are included, with great instructions.
SKU: L58SM-SEQ -
-
Hot Rod Interior Lights, LED Dash Indicators
Large Chrome Low Profile LED Indicators
These beautiful Low profile LED indicator light add a great look to your dash without being big and bulky. They go great with our “Hot Dot” push button switches. They are avalible in two sizes, The large one is 5/8″ and mounts in a 15/32 diameter hole. Purchase large indicators shown on the left in the picture on this page.
Small one is 7/16′ and mounts in a 5/16′ diameter hole. Easy 2 wire connections will make this indicator light a great addition to you project. To purchase the Small low profile indicator, type “Small Chrome Indicator” in the search bar.
SKU: 241xx -
Hot Rod Interior Lights
Interior Replacement LED Festoon Bulbs (IL-8#B)
We are now selling replacement LED Festoon Bulbs. These are the same great units that come in our very own products. Please verify size before purchasing.
The IL-82B has a working dimension for clip in style festoon sockets of 1″ – 1 1/2″. The minimum distance between the bulb clips on your light cannot be any smaller than 1″
The IL-85B has a working dimension for clip in style festoon sockets of 3/4″ – 1 1/8″. The minimum distance between the bulb clips on your light cannot be any smaller than 3/4″
SKU: IL-8#B -
Hot Rod Interior Lights
Replacement LED Gauge Bulbs
A quality plug and play bulb designed to be a direct replacement for you current gauge lighting. These bulbs are the correct brightness for gauges however not suggested for Exterior lighting applications. These bulbs are a direct replacement for #57 bulb styles and similar. Available in Amber, Blue, Green, Red and White sold in pairs.
SKU: IL-57# -
Hot Rod Interior Lights
194 / 168 Replacement LED Bulbs for Gauge Lighting (IL-194X)
A quality plug and play bulb designed to be a direct replacement for you current gauge lighting. These bulbs are the correct brightness for gauges however not suggested for Exterior lighting applications. These bulbs are a direct replacement for 161, 168, 193, 194 bulb styles. Available in Amber, Blue, Red and White sold in pairs.
SKU: IL-194X -
Hot Rod Wiring Materials
LED Conversion Kit
Make any single intensity (BRIGHT ONLY) LED strip dual intensity (DIM and BRIGHT) with one of these conversion kit. You will need one per strip depending on how many LED you have in each light. The L-JE02 Is rated for 25-60 RED LED’s and 12-32 Amber LED’s. The L-JE03 Is rated for 5-20 RED LED’s and 4-8 AMBER LED’s. The L-JE01’s are used for Incandescent bulbs. NOTE These conversion kits are intended for use with our LED strips only. They will work with other manufacturer’s LED’s but we DO NOT guarantee that they will work.
SKU: L-JE0# -
Custom Switches for Hot Rods
LED Dimmer and Knob
All new LED on/off and full range dimmer rated at 6 amps max and no minimum amount of draw is required. This dimmer works with incandescent bulbs and LED’s. Dim either LED, incandescent or both types of lighting simultaneously with this one dimmer. The dimmer comes with the knob shown however it will take any knob with a 1/4” shaft. Requires wiring both the power and ground leads through the unit for operation.
SKU: WI-DIM -
Hot Rod Wiring Materials
Dummy Load Resistor for LED Lights
When using LED’s for turn signals your regular flasher doesn’t work right anymore because the LED’s don’t pull enough amperage to trigger it. This “dummy load” resistor wires in parallel with the LED to add the necessary amperage draw. One dummy load per side is usually sufficient. (Sold only in Pairs)
SKU: L52DL2
