taillights
Showing all 6 results
-
Hot Rod Exterior Lighting
Double-D LED Taillights (L58-DDR)
Double-D taillights with twice the diodes. Two strips of 60 Super Bright Red LED’s per light, inside an aluminum housing. 1/4″ thick build-in, flush mounted red acrylic lenses with prismatic diffusers. Each strip is split 40-20 and the strips are wired separately so that you may wire the strips together or not. Work with integral turn/brake systems or vehicles with separate turn signals. The lenses are 1/2″ wide x 15-1/4″ long. Mounting hardware and dual intensity convertors included.
SKU: L58-DDR -
Hot Rod Exterior Lighting, Hot Rod LED Backup Lights
Double-D LED Taillights with Bright White LED Backup Lights (L58-DD-BU)
Hot Rod Exterior Lighting, Hot Rod LED Backup LightsDouble-D LED Taillights with Bright White LED Backup Lights (L58-DD-BU)
Double-D taillights with twice the diodes – two strips of 50 super bright LED’s per light plus super bright white LEDs for backup lights all inside an aluminum housing. Build-in, flush mount clear acrylic lenses are 1/4” thick, 1/2” wide and 15-1/4” long plus diffuser. Each red strip is split 30-20 and are wired separately so that you can wire the strips together or not. Works with integral turn/brake systems or on vehicles with separate turn signals. Hardware and dual intensity convertors included.
SKU: L58-DD-BU -
Hot Rod Exterior Lighting, Hot Rod Tail Lights
Small Sequential LED Taillights (L58SM-SEQ)
Our #L58SM taillights above, but three steps better. Each light is split into three groups of 10 LED’s that sequence inside-out with the turn signals. Brake lights quickly sequences once then all stay on. All the necessary convertors, an electronic flasher and sequencing modules are included, with great instructions.
SKU: L58SM-SEQ -
Hot Rod Exterior Lighting, Hot Rod Tail Lights
Sequencing LED Taillights for cars with Separate Turn Signals (L72-SEQ)
Hot Rod Exterior Lighting, Hot Rod Tail LightsSequencing LED Taillights for cars with Separate Turn Signals (L72-SEQ)
These taillights are split 30-10-10-10 so that the inner 30 LEDs are the brake light and taillight and the outer 30 sequence 10-10-10 with the turn signals so they work on cars that originally had separate turn signals.
Flush mounting, build-in lenses are 1/2″ wide X 15-1/4″ long. With hardware, electronic flasher and instructions.
SKU: L72-SEQ -
Discount Hot Rod Parts
2″ Auxiliary Small LED Rectangular Tail Lights & Turn Signal Lights
Your choice of Red LED’s.
These sealed units have 4 LEDs in a 2″ by 5/8″ lens. Available in red. They are single intensity. Add our dual intensity conversion kit to get a dimmer running light and a brighter turn signal.
SKU: L63-LED -
Hot Rod Exterior Lighting
Bullet Beehive LED Taillights w/ Billet Base (L84)
Beehive lights are now available in large and small sizes
’50’s styling with 21st century technology. Each light has Super Bright Red & Orange LED’s in a Beehive light that has a neat star pattern. Machined Billet Base provides a high-tech finishing touch. Easily mounted to a flat surface using the hardware provided – only three holes needed to install. Dual intensity converter included. Use as a pair or in groups of four or six for that classic taillight look. These lights meet DOT/SAE requirement J592e and are so marked. Sold in pairs.
Overall dimensions for the original large beehives are 2-3/4″ dia. at the base x 2-7/8″ tall. The new small units are 2-1/4″ dia. at the base x 2-1/8″ tall
SKU: L84
