Banjo Style Door Handles and Window Cranks (TQ-BJ**)
Trique Manufacturing’s banjo style door handles, window cranks, and vent window cranks are the perfect compliment to any banjo steering wheel. While these handles and window cranks mesh very well in a vehicle equipped with a banjo steering wheel they also have a look that allows them to stand alone as well. These handles represent a modern take on a nostalgic look. Each handle and crank is precisely waterjet cut from stainless steel then polished to a beautiful luster. The base, cap, and knobs are machined billet aluminum and are fully polished as well. Our screw cover caps house a strong magnet that attaches itself to the heads of the mounting screws offering a secure fit while allowing you to remove it later without marring the part. Choose your door handles or window cranks below. Sold in pairs.
· Compliments any banjo steering wheel
· Stainless steel handle Billet aluminum cap and base
· Magnetic cap prevents marring should you have to remove it
· Universal hub fits all handle shafts
· Designed and Made in the USA
· Length of Banjo Door Handle – 5 1/8″
· Length of Banjo Window Crank – 5 1/2″
· Length of Banjo Vent Window Crank – 3 3/4″
· Height of handle base – 3/4″
$140.00
Trique Manufacturing’s banjo style door handles, window cranks, and vent window cranks are the perfect compliment to any banjo steering wheel. While these handles and window cranks mesh very well in a vehicle equipped with a banjo steering wheel they also have a look that allows them to stand alone as well. These handles represent a modern take on a nostalgic look. Each handle and crank is precisely waterjet cut from stainless steel then polished to a beautiful luster. The base, cap, and knobs are machined billet aluminum and are fully polished as well. Our screw cover caps house a strong magnet that attaches itself to the heads of the mounting screws offering a secure fit while allowing you to remove it later without marring the part. Choose your door handles or window cranks below. Sold in pairs.
· Compliments any banjo steering wheel
· Stainless steel handle Billet aluminum cap and base
· Magnetic cap prevents marring should you have to remove it
· Designed and Made in the USA
· Length of Banjo Door Handle – 5 1/8″
· Length of Banjo Window Crank – 5 1/2″
· Length of Banjo Vent Window Crank – 3 3/4″
· Height of handle base – 3/4″
| Weight | 0.00000000 lbs |
|---|---|
| Dimensions | 0.00000000 × 0.00000000 × 0.00000000 cm |
| Trique Products | Banjo Door Handles (TQ-BJ01), Banjo Window Cranks (TQ-BJ02), Banjo Vent Window Cranks (TQ-BJ03) |
| Shaft size | Pre 49 7/16'' or 3/8''Square, 49 up 1/2'' |
You may also like…
-
Hot Rod Handle Switch Kits and Power Window Crank Switches
Pre-1949 Splined Power Window Switches for Original “Crank” Handles (CA-EPWS-GM)
Hot Rod Handle Switch Kits and Power Window Crank SwitchesPre-1949 Splined Power Window Switches for Original “Crank” Handles (CA-EPWS-GM)
Pre- 1949 splined power window switches for your original “crank” handles.
Keep that original look and still install power windows in your ride with these switches. A slight push on the crank will open/close the window.
2-Door kit made by Carolina Custom.
SKU: CA-EPWS-GM -
RFID Ignition Security Systems
RFID Ignition Security Unit
This all new StreetWorks RFID is designed to work with your Hot Dot Ignition Systems or your existing key. This is the security system that your hot rod has been missing.
As you may already know the “HOT DOT” ignition takes the place of your conventional “keyed” ignition switch however it has no security built in. This all new RFID Security system gives you the security and convenience that today’s society demands.
What is RFID?
RFID stands for Radio-Frequency Identification. The acronym refers to small electronic devices that consist of a small chip and an antenna. The RFID device serves the same purpose as magnetic strip on the back of a credit card; it provides a unique identifier for that object. And, just as a magnetic strip must be scanned to get the information, the RFID device must be scanned to retrieve the identifying information.
The RFID unit has 3 different operating modes.
Mode 1: High security mode. The car only starts and stays running with the RFID fob in range.
Mode 2: Medium security mode. The RFID fob must be in range for car to start and will stay running until the operator turns it off, then it won’t restart.
Mode 3: NO security mode. Should your fob become lost or damaged you can over-ride the system by entering a code with the hidden button switch.
The RFID is capable of working between 5 and 200 feet with the vehicle’s windows closed. If the vehicle’s windows are open we do not have a measurement for how far away the unit will work. There are 8 increments of sensitivity that the unit can be programmed to.
SKU: WI-RFID -
Hot Rod Ignition Switch Systems
Hot Rod Push Button Start Ignition Switch
Push our Ignition Switch button once and your accessory circuit comes on. A second push and hold engages the starter. When your engine starts just release the switch and your running as well as the LED indicator ring. Press it once more and everything turns off. This gorgeous Stainless steel (22MM) switch mounts in a 7/8″ diameter hole with the overall size of 1′. The compact ignition module can hide under your dash or in the engine bay.
This kit will work with our smaller (16MM) momentary push button but be warned guys; you’ll be using your pinky.
Compare our price to any other Single Switch Ignition System anywhere! We were the first to bring this system to the street rod market and we know how to do it best!
Check out our full line of matching low profile, push button switches and indicator lights.
Note this unit requires securing your car. Check out our battery disconnects or simply install a hidden kill switch or, look at our RFID unit.
SKU: 12*** -
Hot Rod Handle Switch Kits and Power Window Crank Switches
Square Shank Ford / Mopar Power Window Switches for Original “Crank” Handles (CA-EPWS-F)
Hot Rod Handle Switch Kits and Power Window Crank SwitchesSquare Shank Ford / Mopar Power Window Switches for Original “Crank” Handles (CA-EPWS-F)
3/8″ Square shank Ford / Mopar power window switches for your original “crank” handles.
Keep that original look and still install power windows in your ride with these switches. A slight push on the crank will open/close the window.
2-Door kit made by Carolina Custom.
SKU: CA-EPWS-F
Related products
-
Cables and Cable Releases
Emergency Door Release Kit (TP-BKD-1)
Even the very best electrical entry systems could go bad. This Emergency Door Release Kit gives you the mechanical back-up way to trip the driver door latch and get into your car. Kit contains 8+ feet of encased cable, stainless steel braided door wire loom with billet ends to run the cable through and into the door, billet pull knob with set screw, cable clips and mounting hardware. Easily run into the engine compartment or under a fender well. Why leave yourself unprotected? Made in America by Itsashoka Innovations.
SKU: TP-BKD-1 -
Custom Door Hardware, Windows Cranks & Switch Knobs
Oval Door Handle Pulls with Radius Bezel TQ-ODP
These machined billet aluminum door pulls from Trique Manufacturing are offered with a radius bezel or a 30 degree angled bezel to match our other interior components. This one featured has a radius bezel.
- Machined from 6061 Aluminum
- Comes with mounting brackets
- Made in the USA
Dimensions:
- Footprint = 4.5″ X 1.25″
- Bezel = 5″ X 1.5″
- Pocket Depth = .55″
SKU: TQ-ODP -
Hot Rod Door Latches and Parts
Gator-Jaw Door Prop Rod (CA-DRP4)
Carolina Custom’s “Slick Rod” for holding doors open at shows. Secure attachment to your Gator-Jaw style latch – one end fits over the striker bolt, the other end “locks” into the latch. Fits any of the three popular sizes of Gator-Jaw latches. The rod itself is stainless steel.
SKU: CA-DRP4 (pair)
