Contemporary style column dress up kit (IT-CPG)
$39.00
This kit dresses up you GM steering column. You get new tilt column and turn signal levers with contemporary styling. Matching Shift and Hazard knobs complete the package. This dress up kit fits most GM columns for the late 60’s through the 90’s. It works with aftermarket GM columns like Flaming River and Ididit as well. Knobs come in either a brushed aluminum or Raven black finish for the same low price of $39.00 Need a switch on the end of your turn signal or tilt lever? Check out our full listing of L33G and L43G levers.
| Finish | Brushed Finish, Raven Black Finish |
|---|
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
You may also like…
-
RFID Ignition Security Systems
RFID Ignition Security Fob (WI-RFID)
This all new StreetWorks RFID is designed to work with your Hot Dot Ignition Systems or your existing key. This is the security system that your hot rod has been missing.
As you may already know the “HOT DOT” ignition takes the place of your conventional “keyed” ignition switch however it has no security built in. This all new RFID Security system gives you the security and convenience that today’s society demands.
What is RFID?
RFID stands for Radio-Frequency Identification. The acronym refers to small electronic devices that consist of a small chip and an antenna. The RFID device serves the same purpose as magnetic strip on the back of a credit card; it provides a unique identifier for that object. And, just as a magnetic strip must be scanned to get the information, the RFID device must be scanned to retrieve the identifying information.
The RFID unit has 3 different operating modes.
Mode 1: High security mode. The car only starts and stays running with the RFID fob in range.
Mode 2: Medium security mode. The RFID fob must be in range for car to start and will stay running until the operator turns it off, then it won’t restart.
Mode 3: NO security mode. Should your fob become lost or damaged you can over-ride the system by entering a code with the hidden button switch.
The RFID is capable of working between 5 and 200 feet with the vehicle’s windows closed. If the vehicle’s windows are open we do not have a measurement for how far away the unit will work. There are 8 increments of sensitivity that the unit can be programmed to.
SKU: WI-RFID -
Hot Rod Ignition Switch Systems
Hot Dot All-in-One Ignition/Start/Stop With Switch (12***)
Push our Ignition Switch button once and your accessory circuit comes on. A second push and hold engages the starter. When your engine starts just release the switch and your running as well as the LED indicator ring. Press it once more and everything turns off. This gorgeous Stainless steel (22MM) switch mounts in a 7/8″ diameter hole with the overall size of 1′. The compact ignition module can hide under your dash or in the engine bay.
This kit will work with our smaller (16MM) momentary push button but be warned guys; you’ll be using your pinky.
Compare our price to any other Single Switch Ignition System anywhere! We were the first to bring this system to the street rod market and we know how to do it best!
Check out our full line of matching low profile, push button switches and indicator lights.
Note this unit requires securing your car. Check out our battery disconnects or simply install a hidden kill switch or, look at our RFID unit.
SKU: 12***
Related products
-
-
Custom Switches for Hot Rods
Column Turn Lever Switch (L43)
Polished Aluminum Knob and Stainless Steel Arm with Chrome Switch Bezel and Black Button. Fits GM & other columns with single screw through flat end. S/S screw included.
This beautiful Turn Signal Lever also contains a REAL ON/OFF switch. Sold with or without a 40 amp relay.
SKU: L43 -
Courtesy Lighting, Hot Rod Interior Lights
LED Oval Interior Hot Rod Dome Light With Radius Bezel (TQ-OIL)
Courtesy Lighting, Hot Rod Interior LightsLED Oval Interior Hot Rod Dome Light With Radius Bezel (TQ-OIL)
Trique’s Oval Interior Light is machined from a solid piece of billet aluminum and houses (6) 5mm cool white L.E.D’s behind a dome shaped lens. Each interior light comes fully polished. This interior light features a radius bezel to match many of our other interior components. Comes with the mounting bracket.
- Billet Aluminum
- LED Light
- Soft white light versus dingy yellow light
- Comes with mounting bracket
- Made in the USA
Dimensions:
- Footprint = 4.25″ X 1.75″
- Bezel = 5.25″ X 2.125″
- Required depth = .55″
SKU: TQ-OIL* -
Custom Switches for Hot Rods
LED Dimmer
All new LED on/off and full range dimmer rated at 6 amps max and no minimum amount of draw is required. This dimmer works with incandescent bulbs and LED’s. Dim either LED, incandescent or both types of lighting simultaneously with this one dimmer. The dimmer comes with the knob shown however it will take any knob with a 1/4” shaft. Requires wiring both the power and ground leads through the unit for operation.
SKU: WI-DIM
There are no reviews yet.