These gorgeous LED lights are what will set your custom interior apart from the rest of the other cars at the car show. The rectangular face is 2-½” tall by 1-3/8″ wide. The oval face is 2-5/16″ tall 3-1/4″ wide
Finish | Brushed, Raven Black, Polished |
---|---|
Faceplate Shape | Oval, Rectangle |
Related products
-
Custom Hot Rod Switch Panels, Hot Rod Power Window Switches
Dimpled Aftermarket Universal Power Window Switch Kit
Custom Hot Rod Switch Panels, Hot Rod Power Window SwitchesDimpled Aftermarket Universal Power Window Switch Kit
0 out of 5(0)3 Switch Panel
A single location (console) 3 switch control panel that measures 2 – 3/4″ wide by 1 – 5/8″ high.
Includes 60″ of lead wires, connectors and instructions. The switch frame mounts with (4) blind studs from behind.
Switches are rated at 5 amps max. Please use relays if you’re 5 amps or more. Polarity reversing modules are required for 2 wire non grounded window kits.
Don’t know if you have Polarity reversing Motors? See the Product Instructions Tab to determine if your motors are Polarity reversing or Non-Polarity reversing.
SKU: L39B3X$230.00 -
Hot Rod Power Window Switches
Light Clip for L39B Switches (L39B-Clip)
0 out of 5(0)Now you can add illumination to any of our family of L39B Power Window and specialty switches. This Clip secures to the switch frame mounting screws and holds your choice of 5/32″ size LED (also sold separately). The LED shines between the billet rocker and face plate of the switch. We recommend using one clips on each side of the switch, for example for a L39BOD switch panel witch is a 2 switch panel using 3 clips would project an equal amount of light across the panel.
SKU: L39B-Clip$5.00 – $18.00 -
Hot Rod Power Window Switches
GT2 Power Window Switch
0 out of 5(0)These are our all new GT2 switches. These switches are sold for use as a power window switch however can be used for virtually anything UPON REQUEST. These all new switches have a slim fit and finish to prevent getting snagged when mounted on the door or console of your vehicle. They have the same design as the GT3 and GT4D panels so they will match the rest of your switches.
IF YOU ARE WIRING A 2 SWITCH PANEL ON THE DRIVERS DOOR AND A SINGLE SWITCH PANEL ON THE PASSENGER DOOR ORDER THE TRIPLE KIT.
Single GT2 switch with reversing module 10219……$ 120.00
Double GT2 switch with reversing module 10220……$220.00
Triple kit GT2 (Comes with a Double and a Single panel with reversing modules) 10231…..$320.00
The modular design of the switch face lets us build you a custom switch panel to control just about anything. Whether you want a single switch to turn on a dome light or a bank of 20 to run everything in the car we can do it.
The switches are all machined from billet aluminum and have a brushed finish. The actual switch can be either momentary-off-momentary or on-off-on. All switches are rated at 5 amps so you may want relays for heavy loads. (see page 41) Want lights? We can add 1 or 2 lights to each switch in your choice of colors. The switch panels are 1 3/4” tall. A single switch is 1 5/8” long. Each additional switch adds 1 1/8”. (for example a 6 switch panel is 7 3/8” long) The toggle is 5/8” tall.
The GT4D series include the dividers to safeguard those important circuits from accidentally being switched. The GT3 series are without dividers. The GT2 series switches are without dividers have a short rocker so to not interfere while on your door and include polarity reversing modules(intended for power windows / locks but we can still make these however you would like).
Don’t know if you have Polarity reversing Motors? See the Product Instructions Tab to determine if your motors are Polarity reversing or Non-Polarity reversing.
SKU: GT2$120.00 – $320.00 -
Hot Rod Power Window Switches
Oval Billet Power Window Toggle Switch
0 out of 5(0)Our Billet 3-wire rocker switch sits inside an Oval billet frame that’s only 1-5/8″ wide by 2-1/4″ high. Adapt directly to positive (+) output remotes – no extra relays required!
Single Switch
Single switch / frame, polarity reversing module, wire leads and instructions.
Dual Switch
Dual switch kit for center console mounting or for both switches on the driver door only. Dual switch frame is 3-1/8″ wide by 1-5/8″ high, (2) polarity reversing modules, wire leads and instructions.
Triple Switch
Triple kit puts dual switches on the driver door and one on the passenger door. Switches and frames, (2) polarity reversing modules, lots of wire and instructions.
Don’t know if you have Polarity reversing Motors? See the Product Instructions Tab to determine if your motors are Polarity reversing or Non-Polarity reversing.
NOTE:
These are not plug-in replacements for 5-wire switches. Call if you have questions. Reversing modules are needed for power windows. Switches without modules will work for air-ride systems with separate up – down solenoids requiring a positive signal.
SKU: L39BO$98.00 – $269.00