Custom Door Hardware, Windows Cranks & Switch Knobs
Showing all 16 results
Window cranks and switch knobs are essential pieces of car door hardware. Watson’s StreetWorks has a great selection of hot rod knobs and window cranks, along with trim plates, to keep your ride functioning and looking great. We carry window cranks in a variety of styles, such as banjo and slotted, all made of quality materials like stainless steel. Our switch knobs are similarly high-quality, and a matching set will make your interior look as slick as your street rod’s exterior. Shop for custom car door hardware now!
-
Custom Door Hardware, Windows Cranks & Switch Knobs, Hot Rod Door Latches and Parts, Hot Rod Latches, Hinges and Cable Releases, Releases, Remotes & Keyless Entry Systems
True Aero Electronic Flush Mount Car Door Handles (ET-TA)
Custom Door Hardware, Windows Cranks & Switch Knobs, Hot Rod Door Latches and Parts, Hot Rod Latches, Hinges and Cable Releases, Releases, Remotes & Keyless Entry SystemsTrue Aero Electronic Flush Mount Car Door Handles (ET-TA)
RFID stands for Radio-Frequency Identification. The acronym refers to small electronic devices that consist of a small chip and an antenna. The RFID device serves the same purpose as magnetic strip on the back of a credit card; it provides a unique identifier for that object. And, just as a magnetic strip must be scanned to get the information, the RFID device must be scanned to retrieve the identifying information.
The kit includes;
2 weld in door handle pockets
The door handles that unscrew from the pocket for body work. (also the activation switch comes out)
RFID Security Module
2 Relay modules that cutoff the pulse to your solenoid after a half second so your solenoid doesn’t burn out as you are pulling your door open.
Waterproof backup switch that will work even if you lose your RFID Fob.
*Solenoids are sold separately per your latch pulling needs*
SKU: ET-TA -
Custom Door Hardware, Windows Cranks & Switch Knobs, Window Cranks
Banjo Style Door Handles and Window Cranks (TQ-BJ**)
Custom Door Hardware, Windows Cranks & Switch Knobs, Window CranksBanjo Style Door Handles and Window Cranks (TQ-BJ**)
Trique Manufacturing’s banjo style door handles, window cranks, and vent window cranks are the perfect compliment to any banjo steering wheel. While these handles and window cranks mesh very well in a vehicle equipped with a banjo steering wheel they also have a look that allows them to stand alone as well. These handles represent a modern take on a nostalgic look. Each handle and crank is precisely waterjet cut from stainless steel then polished to a beautiful luster. The base, cap, and knobs are machined billet aluminum and are fully polished as well. Our screw cover caps house a strong magnet that attaches itself to the heads of the mounting screws offering a secure fit while allowing you to remove it later without marring the part. Choose your door handles or window cranks below. Sold in pairs.
· Compliments any banjo steering wheel
· Stainless steel handle Billet aluminum cap and base
· Magnetic cap prevents marring should you have to remove it
· Universal hub fits all handle shafts
· Designed and Made in the USA
· Length of Banjo Door Handle – 5 1/8″
· Length of Banjo Window Crank – 5 1/2″
· Length of Banjo Vent Window Crank – 3 3/4″
· Height of handle base – 3/4″
SKU: TQ-BJ** -
Custom Door Hardware, Windows Cranks & Switch Knobs, Window Cranks
Salt Flat Window Cranks (TQ-SF**)
Trique Manufacturing’s Salt Flat Series door handles, window cranks, and vent window cranks are inspired by the lightening holes that were found in so many nostalgic vehicles that raced the famous Bonneville Salt Flats. While the holes served a purpose on many vehicles that raced the flats, it later became a style that can be found on many custom cars today. We liked the look so much that we designed a door handle and window crank set that took the look and moved it to the inside of your vehicle. Each handle and crank is precisely waterjet cut from stainless steel then polished to a beautiful luster. The base, cap, and knobs are machined billet aluminum and are fully polished as well. Our screw cover caps house a strong magnet that attaches itself to the heads of the mounting screws offering a secure fit while allowing you to remove it later without marring the part. Choose your door handles or window cranks below. Sold in pairs.
- Compliments any interior.
- Stainless steel handle, Billet aluminum cap, and base.
- Magnetic cap prevents marring should you have to remove it.
- Universal hub fits all handle shafts.
- Designed and Made in the USA
- Length of Salt Flat Door Handle – 4 3/4″
- Length of Salt Flat Window Crank – 4 3/4″
- Length of Salt Flat Vent Window Crank – 3 1/4″
- Height of handle base – 3/4″
SKU: TQ-SF** -
Custom Door Hardware, Windows Cranks & Switch Knobs, Window Cranks
Slotted Aluminum Door Handles And Window Cranks
Custom Door Hardware, Windows Cranks & Switch Knobs, Window CranksSlotted Aluminum Door Handles And Window Cranks
Trique Manufacturing’s slotted style door handles and window cranks are the perfect compliment to any interior. Each handle and crank is CNC machined from billet aluminum, then polished to a beautiful luster. The base, cap, and knobs are also machined billet aluminum and are fully polished as well. Our screw cover caps house a strong magnet that attaches itself to the heads of the mounting screws offering a secure fit while allowing you to remove it later without marring the part. Choose your door handles or window cranks below. Sold in pairs.
- Magnetic cap prevents marring should you have to remove it
- Universal hub fits all handle shafts
- Designed and Made in the USA
- Length of Banjo Door Handle – 5 1/8″
- Length of Banjo Window Crank – 5 1/2″
- Height of handle base – 3/4″
SKU: TQ-SL** -
Custom Door Hardware, Windows Cranks & Switch Knobs
Oval Door Handle Pulls with Radius Bezel TQ-ODP
These machined billet aluminum door pulls from Trique Manufacturing are offered with a radius bezel or a 30 degree angled bezel to match our other interior components. This one featured has a radius bezel.
- Machined from 6061 Aluminum
- Comes with mounting brackets
- Made in the USA
Dimensions:
- Footprint = 4.5″ X 1.25″
- Bezel = 5″ X 1.5″
- Pocket Depth = .55″
SKU: TQ-ODP -
Custom Door Hardware, Windows Cranks & Switch Knobs, Switch Panels
Column Dress-up Knobs (L44)
And to finish the job, get our Column Dress-up Knobs for the Column Shifter Arm and Hazards. Column Shifter Knob is polished aluminum with stainless steel set screw. Hazard Knob is polished aluminum with 6-32 threaded stud.
SKU: L44 -
-
-
Custom Door Hardware, Windows Cranks & Switch Knobs
Vintage Air Style Dress-Up Knobs (B14VN)
Have all your dash nobs match your Vintage Air Control unit. Thanks to our friends at Vintage Air, we’ve machined these nobs to match their A/C control panel nobs so you can have a completely uniform, matching interior… Cool Stuff!
SKU: B14VN -
Custom Door Hardware, Windows Cranks & Switch Knobs
Billet Plug Only (w/stud & o-rings) #B23P
Accepts any 10-32 threaded knob to match your interior. Knobs sold separately. Fit most standard power ports (cigarette lighter) Our Billet Plug features machined Billet Plug with O-ring retainer, a spare o-ring and a 10-32 threaded stud for attaching the decorative knob of your choice (sold separately).
SKU: B23P -
Custom Door Hardware, Windows Cranks & Switch Knobs
Billet Levers for Car Locks
All of the power and manual safety locks come with a plastic lever for the manual release. But your car has all the billet goodies! Match it all up with these beautiful billet aluminum levers. Fit 1/4″ shaft with set screw.
SKU: B-RHL -
-
Custom Door Hardware, Windows Cranks & Switch Knobs
Billet Switch Nut with O-Ring for Headlight Switch (B-HLSN)
Custom Door Hardware, Windows Cranks & Switch KnobsBillet Switch Nut with O-Ring for Headlight Switch (B-HLSN)
Have that headlight switch match with our ignition switch by adding a Billet Headlight Switch Nut with O-Ring. Perfect for part #AA-HLS. Has 7/16 – 28 thread and .203 Dia center hole.
SKU: B-HLSN -
Custom Door Hardware, Windows Cranks & Switch Knobs
Brake Pedal Hole Trim Plate (SA-6510)
From our friends at Sachse Rod Shop. Each piece is 2″ X 4″ with a 1/2″ wide slot. Overlapping feature allows the slot to be 1-1/4″ to 2″ long. 18 gauge steel. Predrilled holes and stainless screws. Helps make installation very simple. (2 plate pieces and 4 screws)
SKU: SA-6510
