Display Trim
Showing all 7 results
-
Display Trim
Backup Monitor Console Camera – Through Hole Design (IT-MON-TH)
A Backup Screen for Your Console!
When we introduced our mirror /screen backup system it was a huge success but many folks need a unit for their center console. Well here it is. The large 5″ screen is mounted in a billet frame measuring 5-¼” wide by 4″ tall. You will need less than an inch of backspace. Sold with either a through hole or license plate mounted camera.
SKU: IT-MON-TH$249.00 -
Display Trim
Backup Monitor Console Camera – License Plate Mounted Design (IT-MON-LP)
A Backup Screen for Your Console!
When we introduced our mirror /screen backup system it was a huge success but many folks need a unit for their center console. Well here it is. The large 5″ screen is mounted in a billet frame measuring 5-¼” wide by 4″ tall. You will need less than an inch of backspace. Sold with either a through hole or license plate mounted camera.
SKU: IT-MON-LP$249.00 -
Display Trim
Backup mirror/camera system with License plate camera (IT-MIR-LP)
A Watsons StreetWorks exclusive! We’ve placed a 4.3 inch screen in a custom billet center mirror that will look great in any ride. We offer 2 styles of cameras to make the installation easy. Wiring the system is amazingly easy, just supply power and ground to the camera and screen, then one wire joins the 2. When you put your vehicle in reverse the solid state screen comes on instantly. The smoked glass on the mirror looks great when the screen is off and cuts the nighttime glare from lights behind you. Mount the mirror on your dash or overhead. The arm pivots at both ends giving you plenty of adjustment. The mirror measures 3″ by 6″ overall and the base is 2-½” by ¾”. The arm is 2-½” long. The screen has several adjustments including contrast, brightness, etc. Choose from either a license plate mounted camera or a body mounted unit. Both packages include the billet framed mirror/screen with mounting hardware, a waterproof camera, wire and instructions.
The license plate camera mounts behind your plate with just the tiny camera sticking over. Run the wire through a small, 7/32″ hole.
SKU: IT-MIR-LP$299.00 -
Display Trim
Backup mirror/camera system with through hole camera (IT-MIR-TH)
A Watsons StreetWorks exclusive! We’ve placed a 4.3 inch screen in a custom billet center mirror that will look great in any ride. We offer 2 styles of cameras to make the installation easy. Wiring the system is amazingly easy, just supply power and ground to the camera and screen, then one wire joins the 2. When you put your vehicle in reverse the solid state screen comes on instantly. The smoked glass on the mirror looks great when the screen is off and cuts the nighttime glare from lights behind you. Mount the mirror on your dash or overhead. The arm pivots at both ends giving you plenty of adjustment. The mirror measures 3″ by 6″ overall and the base is 2-½” by ¾”. The arm is 2-½” long. The screen has several adjustments including contrast, brightness, etc. Choose from either a license plate mounted camera or a body mounted unit. Both packages include the billet framed mirror/screen with mounting hardware, a waterproof camera, wire and instructions.
To mount the through hole camera simply drill a ¾” hole on a level body panel.
SKU: IT-MIR-TH$299.00 -
Display Trim
Dual Port Billet USB charger and Volt Meter (IT-USB)
This beautiful Billet USB Charger and Volt Meter will charge 2 phones or other devices while you’re on the road. It measures 1 ¾” dia. face, 2 ½” deep, and fits in a 1 ½” hole. This handy unit also checks the vehicle’s voltage.
The LED Display shows the power/charging status of the device(s) plugged into it. Both ports are high output ports. Capable of pushing 2.4 amps per port and has the typical USB charger of 5.0 volts.
Product comes with wires, mounting bracket and screws and, instructions.
SKU: IT-USB$79.00 -
Display Trim
Dual Port USB charger / Volt Meter with Polished Aluminum Face (IT-USBP)
This is our beautiful brushed Billet USB Charger and Volt Meter with a polished aluminum face. It will charge 2 phones or other devices while you’re on the road. It measures 1 ¾” dia. face, 2 ½” deep, and fits in a 1 ½” hole. This handy unit also checks the vehicle’s voltage.
The LED Display shows the power/charging status of the device(s) plugged into it. Both ports are high output ports. Capable of pushing 2.4 amps per port and has the typical USB charger of 5.0 volts.
Product comes with wires, mounting bracket and screws and, instructions.
SKU: IT-USBP$84.00
