Custom Automotive Interior Trim Accessories
Showing 1–20 of 61 results
Working on a hot rod interior is one of the most exciting parts of the customization process; it’s when you can let your personal style shine (literally, if you throw in some illuminated cup holders). It’s also when you can add modern amenities to your old classic. For example, you could add a backup monitor to ensure no unseen obstacles block your path from behind. The possibilities for your custom automotive interior are endless in the lineup of trim accessories available at Watson’s StreetWorks.
-
Custom Door Hardware, Windows Cranks & Switch Knobs, Hot Rod Door Latches and Parts, Hot Rod Latches, Hinges and Cable Releases, Releases, Remotes & Keyless Entry Systems
True Aero Electronic Flush Mount Car Door Handles (ET-TA)
Custom Door Hardware, Windows Cranks & Switch Knobs, Hot Rod Door Latches and Parts, Hot Rod Latches, Hinges and Cable Releases, Releases, Remotes & Keyless Entry SystemsTrue Aero Electronic Flush Mount Car Door Handles (ET-TA)
RFID stands for Radio-Frequency Identification. The acronym refers to small electronic devices that consist of a small chip and an antenna. The RFID device serves the same purpose as magnetic strip on the back of a credit card; it provides a unique identifier for that object. And, just as a magnetic strip must be scanned to get the information, the RFID device must be scanned to retrieve the identifying information.
The kit includes;
2 weld in door handle pockets
The door handles that unscrew from the pocket for body work. (also the activation switch comes out)
RFID Security Module
2 Relay modules that cutoff the pulse to your solenoid after a half second so your solenoid doesn’t burn out as you are pulling your door open.
Waterproof backup switch that will work even if you lose your RFID Fob.
*Solenoids are sold separately per your latch pulling needs*
SKU: ET-TA -
Hot Rod & Automotive Interior Display Trim
Backup Monitor Console Camera
A Backup Screen for Your Console!
When we introduced our mirror /screen backup system it was a huge success but many folks need a unit for their center console. Well here it is. The large 5″ screen is mounted in a billet frame measuring 5-¼” wide by 4″ tall. You will need less than an inch of backspace. Sold with either a through hole or license plate mounted camera.
SKU: IT-MON-TH -
Hot Rod & Automotive Interior Display Trim
License Plate Mounted Backup Camera Monitor (IT-MON-LP)
A Backup Screen for Your Console!
When we introduced our mirror /screen backup system it was a huge success but many folks need a unit for their center console. Well here it is. The large 5″ screen is mounted in a billet frame measuring 5-¼” wide by 4″ tall. You will need less than an inch of backspace. Sold with either a through hole or license plate mounted camera.
SKU: IT-MON-LP -
Custom Door Hardware, Windows Cranks & Switch Knobs, Custom Hot Rod Window Cranks
Salt Flat Window Cranks (TQ-SF**)
Custom Door Hardware, Windows Cranks & Switch Knobs, Custom Hot Rod Window CranksSalt Flat Window Cranks (TQ-SF**)
Trique Manufacturing’s Salt Flat Series door handles, window cranks, and vent window cranks are inspired by the lightening holes that were found in so many nostalgic vehicles that raced the famous Bonneville Salt Flats. While the holes served a purpose on many vehicles that raced the flats, it later became a style that can be found on many custom cars today. We liked the look so much that we designed a door handle and window crank set that took the look and moved it to the inside of your vehicle. Each handle and crank is precisely waterjet cut from stainless steel then polished to a beautiful luster. The base, cap, and knobs are machined billet aluminum and are fully polished as well. Our screw cover caps house a strong magnet that attaches itself to the heads of the mounting screws offering a secure fit while allowing you to remove it later without marring the part. Choose your door handles or window cranks below. Sold in pairs.
- Compliments any interior.
- Stainless steel handle, Billet aluminum cap, and base.
- Magnetic cap prevents marring should you have to remove it.
- Universal hub fits all handle shafts.
- Designed and Made in the USA
- Length of Salt Flat Door Handle – 4 3/4″
- Length of Salt Flat Window Crank – 4 3/4″
- Length of Salt Flat Vent Window Crank – 3 1/4″
- Height of handle base – 3/4″
SKU: TQ-SF** -
Custom Door Hardware, Windows Cranks & Switch Knobs, Custom Hot Rod Window Cranks
Slotted Aluminum Door Handles And Window Cranks
Custom Door Hardware, Windows Cranks & Switch Knobs, Custom Hot Rod Window CranksSlotted Aluminum Door Handles And Window Cranks
Trique Manufacturing’s slotted style door handles and window cranks are the perfect compliment to any interior. Each handle and crank is CNC machined from billet aluminum, then polished to a beautiful luster. The base, cap, and knobs are also machined billet aluminum and are fully polished as well. Our screw cover caps house a strong magnet that attaches itself to the heads of the mounting screws offering a secure fit while allowing you to remove it later without marring the part. Choose your door handles or window cranks below. Sold in pairs.
- Magnetic cap prevents marring should you have to remove it
- Universal hub fits all handle shafts
- Designed and Made in the USA
- Length of Banjo Door Handle – 5 1/8″
- Length of Banjo Window Crank – 5 1/2″
- Height of handle base – 3/4″
SKU: TQ-SL** -
Custom Door Hardware, Windows Cranks & Switch Knobs
Oval Door Handle Pulls with Radius Bezel TQ-ODP
These machined billet aluminum door pulls from Trique Manufacturing are offered with a radius bezel or a 30 degree angled bezel to match our other interior components. This one featured has a radius bezel.
- Machined from 6061 Aluminum
- Comes with mounting brackets
- Made in the USA
Dimensions:
- Footprint = 4.5″ X 1.25″
- Bezel = 5″ X 1.5″
- Pocket Depth = .55″
SKU: TQ-ODP -
Custom Door Hardware, Windows Cranks & Switch Knobs, Custom Hot Rod Switch Panels
Column Dress-up Knobs (L44)
Custom Door Hardware, Windows Cranks & Switch Knobs, Custom Hot Rod Switch PanelsColumn Dress-up Knobs (L44)
And to finish the job, get our Column Dress-up Knobs for the Column Shifter Arm and Hazards. Column Shifter Knob is polished aluminum with stainless steel set screw. Hazard Knob is polished aluminum with 6-32 threaded stud.
SKU: L44 -
-
Custom Door Hardware, Windows Cranks & Switch Knobs, Custom Hot Rod Shift Knobs
Contemporary Column Dress-up Knobs (L44G)
Custom Door Hardware, Windows Cranks & Switch Knobs, Custom Hot Rod Shift KnobsContemporary Column Dress-up Knobs (L44G)
And to finish the job, get our Column Dress-up Knobs for the Column Shifter and Hazards. Both are polished aluminum with stainless steel set screw and Black O-rings as shown.
SKU: L44G -
Hot Rod Cup Holders
Swing Out Cup holder (#43053)
Add a useable hidden cupholder to your hot rod for those thirsty cruise days. The cupholder has the perfect size opening to harness the largest of quickie mart drinks yet still handles your typical water bottle just fine. This billet aluminum swing out design swivels under the dash or even your seat for that tidy hidden look. The cupholder has a moveable latching under support so it is very compact when put away. Stop limiting yourself on what you drink in your car because it doesn’t have a locking lid and add a cupholder today.
SKU: 43053 -
Hot Rod Cup Holders
Swing Out Cupholder Extension (IT-53E)
Does our swing out cupholder not come out far enough from your dash? Here’s the solution a nice Brushed Aluminum Extension that will get that cupholder out far enough for you to rest your drink in. This extension is adjustable with 3 different lengths for your adjustment.
SKU: IT-53E -
Hot Rod Cup Holders
Billet Power Swing Out Cupholder (IT-PSO)
We have taken our unbelievably popular 43053 Billet Swing Out Cup Holder and turned it into a Power Swing Out Cup Holder.
Hold the momentary switch until the cup holder reaches full extension. Hold the momentary switch again and the cup holder retracts back out of sight.
Choose Right hand swing if you need it to pivot out from under the dash from right to left.
Choose Left hand swing if you need it to pivot out from under the dash from left to right.
The kit comes with a fully assembled “unit” that is easily mounted under a dash or seat, a prewired switch, mounting screws and instructions.
SKU: IT-PSO -
Hot Rod Cup Holders
Pop Out Dual Cup Holder with Black Plastic Face (43064)
The guts of this slick German engineered unit come directly from the factory. Mount our included bracket behind your dash and just slide this baby in. Also can be mounted under the dash, built into a bench seat or a center console. You will need a spot that’s 7 3/4″ wide, 1 1/4″ tall and 5 1/4″ deep.
SKU: 43064 -
Hot Rod Cup Holders
Flush Mount Pop-out Dual Drink Holder (43043)
The guts of this slick German engineered unit come directly from the factory. We’ve imported them and designed a billet faceplate. Mount our included bracket behind your dash and just slide this baby in. Also can be mounted under the dash built into a bench seat or center console. You will need a spot that’s 7 3/4″ wide and 1 1/4″ tall. It is 5 1/4″ deep.
SKU: 43043 -
Hot Rod Cup Holders
Small Stainless Steel cup holder (pair)(43010)
These stainless steel drop in cup holders are the perfect size for tight spaces. They fit a soft drink can like a glove. Most medium sized fast food drinks will fit as well as a coffee cup. We have the bottoms lined with cork for a clean distintive look (and loose change won’t rattle) 2″ deep and 2 9/16″ ID. Sold in pairs
SKU: 43010 -
Hot Rod Cup Holders
Large Stainless Steel drop in cup holders, (Pair) (43021)
If you like a cold jumbo drink while you cruz or perhaps you go for a mega-grande from 4-Bucks Coffee these are the cup holders for you. At 3.5″ dia.and 2″ deep they’ll hold about anything. We cork lined the bottom for you to quiet down things and add a bit of style. Sold in pairs.
SKU: 43021 -
Hot Rod Cup Holders
Medium Natural Aluminum Cup Holders (pair) (IT-MAC)
With large and small cup holders in Stainless Steel we thought some of you might prefer medium as well. These aluminum units are 3.25 dia. by 3″ deep with a 4” flange. These are finished with a cork base and are sold in pairs.
SKU: IT-MAC -
Hot Rod Cup Holders
Medium Black Aluminum cup holders (Pair) (43032)
With large and small cup holders in Stainless Steel we thought some of you might prefer black trim to match your interior. These black anodized units are 3.25 dia. by 3″ deep with a 4” flange. They are finised with a cork base and are sold in pairs.
SKU: 43032 -
Custom Automotive Interior Trim Accessories, Hot Rod Cup Holders
Billet Drink Holder with magnetic base (B-DH)
Custom Automotive Interior Trim Accessories, Hot Rod Cup HoldersBillet Drink Holder with magnetic base (B-DH)
What do you do??? You’re at the Burger-Doodle drive-thru window, get your double-burger, large fries and drink – the burger and fries kinda’ stay in the bag, but the drink has got to go between your legs. So now you’re steering with your left hand, your right hand is bouncing between the stick shift, french fries and burger, left leg clutch, right leg brake… and that drink is r-e-a-l-l-y cold. Get our beautiful, Billet Drink Holder! Magnetic base holds tight on the glove box door, yet removes easily to store in the glove box. 3″ I.D. x 2-1/8″ deep holds most drink cups. Inner plastic cup to catch condensation. Dual-black O-rings for added looks.
SKU: B-DH
