Hot rod wiring is a complicated beast, but you can count on Watson’s StreetWorks to eliminate at least part of the struggle by providing you all the relay packs, fuse blocks and circuit breakers needed to get your ride on the road. No matter what kind of vehicle you’re working with, and no matter how many extras you’ve installed along the way, you can find all the street rod wiring needed to complete your project right here. Browse our full and always expanding selection today.
Hot Rod Wiring Materials
Showing 1–20 of 88 results
-
Relays/Flashers
C4 Relay Pack (WI-C4)
- 4 relays in a single compact unit
- Each 30 amp relay is double throw.
- Hot or ground trigger
- Relays can be linked for special functions
- No programing, just set a few onboard switches
- Instructions show several relay combo circuits
- Great for upgrading to new sleek switches
- ID your circuits right on the cover
SKU: WI-C4 -
Relays/Flashers
Polarity Reversing Module (#L07W-25)
Power window motors, power trunk lifts, door locks, etc. need to reverse the direction of rotation of the motor in order to work. This is done by reversing the voltage polarity to the motor wire leads. This Reversing Module is needed when you want to use a switch that doesn’t automatically switch (reverse) both the positive and ground to the electric motor (such as a 3-wire switch or remote control).
Just 1/2″ square x 5/8″ wide – small but mighty!
SKU: L07W-25 -
Battery Disconnect Kits for Street Rods
300 Amp Battery Disconnect (BD-300-X)
Watson’s StreetWorks is now offering a battery cut-off that will handle the largest charging systems. Whether you are looking for a theft deterrent or a simple way to disconnect your battery, this is a great solution. This rugged new sealed unit is built for a continuous load of 300 amps and will handle 2,500 amps for a 10 second surge. Overloading a smaller battery disconnect will burn it out and leave you stranded. This new weatherproof unit measures 5” x 3 ¾” x 2” so hide it wherever you need to. The terminal ends can handle the largest cables. A low amperage bypass circuit keeps your clocks and computers alive. An output is included for an optional status light. Two switch options are available. Switch, hardware and instructions are included.
BD-300-T 300 amp disconnect with toggle switch ….$250.00
BD-300-R 300 amp disconnect with round rocker switch….$250.00
SKU: n/a -
Remotes & Keyless Entry Systems
Gemini 2-Function Remote Control (L-GM2Z)
The Gemini remote control gives you two functions in perfect harmony to open either two doors, control power door locks, operate one window up and down, operate two power windows down only, etc. And Now, you don’t need extra relays to do some of these things…they’re built-into the receiver!. That’s a $30 – $40 dollar savings right there! Built-in user programming so that if the unit becomes deprogrammed, you can reprogram it yourself! It includes 30 amp relays built into the receiver so you can power solenoids or actuators with power to spare. 12 gauge power wire leads. Built-in fuse holder with fuses included. Pre-wired for Channel #1 and #2 backup switches (switches not included). Each of the 2 transmitters has 2 buttons to give you “single-button” convenience for each function. Optional ignition disable so that doors can’t be accidentally triggered while the car is running. Butt connectors and great instructions. And it’s from StreetWorks so you know it’s good.
SKU: L-GM2Z -
Remotes & Keyless Entry Systems
Quadra 4 Function Remote Control with 3 Transmitters (L-QD4)
Our Quadra remote control has four functions – perfect for 2 power windows up-and-down. Or use it to open two doors or other operations plus 2 more functions for trunk release, battery disconnect, etc. Built-in user programming so that if the unit becomes deprogrammed, you can reprogram it yourself! It includes (2) built-in 30 amp relays for Channels #1 and #2 plus (2), 40 amp external relays for Channels #3 and #4. 12 ga. power wire leads. Built-in fuse holder with fuses. Pre-wired for Channel #1 and #2 backup switches (switches not included). Wow! It has (3), 4 button transmitters – a button for each function! Optional ignition disable. Connectors, great instructions… and it’s from StreetWorks so you know it’s good.
SKU: L-QD4 -
Remotes & Keyless Entry Systems
“Lucky -7” 7-Function Remote with 3 Transmitters (L-LK7Z)
More functions and more versatility in a new remote control. 7-functions to do nearly anything you want. Functions #1 and #2 trigger 30 amp relays that are built into the receiver for door latch release or reverse polarity operations, too! The other 5-functions control 30 amp relays and can be set up to do (for example) 2-door power windows up and down, plus a trunk release -OR- driver power window up and down, passenger power window down only plus power trunk up and down -OR- well, you get the idea. All with relays. (Note – channel #7 is a pulse output.) User re-programmable. Channels #1 and #2 backup switch leads (switches not included).
Optional Ignition disable. Connectors and great instructions.
SKU: L-LK7Z -
Remotes & Keyless Entry Systems
Hot Dot/ Security System/Remote Package (WI-XXX)
This is the Hot Dot/ Security System/Remote Package
Here it is the total package! The whole enchilada! Soup to nuts this is it!
What You Get:
Streetworks 22mm Hot Dot Push button starter unit with your choice of button color. Blue, Green, Red or White.
Streetworks brand new to the scene RFID module. No keys and Full on security.
Streetworks remote kit that comes with an all new REMOTE START feature.
Description of contents:
HOT DOT PUSH BUTTON START
Push our Ignition Switch button once and your accessory circuit comes on. A second push and hold engages the starter. When your engine starts just release the switch and your running as well as the LED indicator ring. Press it once more and everything turns off. This gorgeous Stainless steel switch mounts in a 7/8″ diameter hole with the overall size of 1′. The compact ignition module can hide under your dash or in the engine bay.
Compare our price to any other Single Switch Ignition System anywhere! We were the first to bring this system to the street rod market and we know how to do it best!
Check out our full line of matching low profile, push button switches and indicator lights.
RFID
This is the all new Streetworks RFID designed to work with your Hot Dot Ignition Systems. This is the security system that your hot rod has been missing.
As you may already know the “HOT DOT” ignition takes the place of your conventional “keyed” ignition switch however it has no security built in. This all new RFID Security system gives you the security and convenience that todays’ society demands.
What is RFID?
RFID stands for Radio-Frequency Identification. The acronym refers to small electronic devices that consist of a small chip and an antenna. The RFID device serves the same purpose as magnetic strip on the back of a credit card; it provides a unique identifier for that object. And, just as a magnetic strip must be scanned to get the information, the RFID device must be scanned to retrieve the identifying information.
The RFID unit has 3 different operating modes.
Mode 1: High security mode. The car only starts and stays running with the RFID fob in range.
Mode 2: Medium security mode. The RFID fob must be in range for car to start and will stay running until the operator turns it off, then it won’t restart.
Mode 3: NO security mode. Should your fob become lost or damaged you can over-ride the system by entering a code with the hidden button switch.
The RFID is capable of working between 5 and 200 feet with the vehicle’s windows closed. If the vehicle’s windows are open we do not have a measurement for how far away the unit will work. There are 8 increments of sensitivity that the unit can be programmed to.
Trilogy Remote Kit
The Trilogy remote control gives you three functions in perfect harmony to open either two doors, control power door locks, operate one window up and down, operate two power windows down only, etc. And Now, you don’t need extra relays to do some of these things…they’re built-into the receiver!. That’s a $30 – $40 dollar savings right there! Built-in user programming so that if the unit becomes deprogrammed, you can reprogram it yourself! It includes 30 amp relays built into the receiver so you can power solenoids or actuators with power to spare. 12 gauge power wire leads. Built-in fuse holder with fuses included. Pre-wired for Channel #1 and #2 backup switches (switches not included). Each of the 2 transmitters has 2 buttons to give you “single-button” convenience for each function. Optional ignition disable so that doors can’t be accidentally triggered while the car is running. The third channel is strictly a Brand New Remote Starter function specifically for your Hot Dot system. This third channel functions by holding both channel 1 and 2 down at the same time making it very difficult to accidentally start your vehicle. Butt connectors and great instructions. And it’s from StreetWorks so you know it’s good.
OR
Super 7 Remote Kit
More functions and more versatility in a new remote control. 7-functions to do nearly anything you want. Functions #1 and #2 trigger 30 amp relays that are built into the receiver for door latch release or reverse polarity operations, too! The other 5-functions control 30 amp relays and can be set up to do (for example) 2-door power windows up and down, plus a trunk release -OR- driver power window up and down, passenger power window down only plus power trunk up and down -OR- well, you get the idea. All with relays. (Note – channel #7 is a pulse output.) User re-programmable. Channels #1 and #2 backup switch leads (switches not included). 4 Relays are included with this kit and one channel operates the remote start without a relay.
SKU: WI-TRI -
Remotes & Keyless Entry Systems
Gear Motor Actuator (WI-29)
For Gator-Jaws and some original latches made after about 1960, these actuators will provide the power needed to trip the latch. This gear motor actuator has 12 pounds of both push and pulling power. With 7/8” of travel you can use it for door locks, trunk latches and more. These will also work for door locks when used with a polarity reversing module (such as our #L07-W). The actuator comes with the mounting and connecting hardware shown. (Actuator measures 5″ long x 2″ High x 1″ Deep) The unit works in both directions so these are great for power lock & unlock doors.
SKU: WI-29 -
Remotes & Keyless Entry Systems
StreetWorks Door Solenoids (L22N)
You want more power. You want fast action. StreetWorks Solenoids have it. They work the way you want, with 40 pounds of pull so they work with original latches. Solenoids, cables, pulleys, connectors, wire hardware and instructions. Solenoid and bracket measure approximately 2-3/4″ wide x 2-1/16″ high (thick) x 4-1/4″ long.
If you need more power than these solenoids have, you have a door problem.
SKU: L22N -
Remotes & Keyless Entry Systems
Spring Loaded Door Popper (SP-DP)
5 inch overall length as shown. 1-5/8″ plunger. Maximum push at full plunger depression is 15 pound force. Comes with mounting plate and screws. Push plate to protect your paint with 3M tape for attaching. Plunger may be shortened for your application.
SKU: SP-DP -
Remotes & Keyless Entry Systems
Cable Installation Kit for Door Solenoids (L22C)
Why scrounge through hardware stores for the rest of the “kit” that those guys don’t sell? This kit puts together all of the little parts to connect actuators or solenoids to latches… for less than 12 bucks! Includes 30″ of aircraft cable, a delrin® pulley, wire stay, pulley mounting hardware, cable ends and instructions. Don’t waste time and money – get our kit and make your life a little easier.
SKU: L22C (One Door) -
Hot Rod Wiring Materials
10 Fuse;Fuse Block WI-6010
Each fuse circuit is fed separately. Rated 30 amps max per fuse. Side blade input and output on opposing sides and the terminals are provided, as well as the mounting screws. Overall dimensions are: 7 1/4″ long x 2 1/16″ wide x 2-1/16″ high, including the protective dust cap screw. For ATO/ATC type fuses rated for a max of 150 amps.
SKU: WI-6010 -
Hot Rod Wiring Materials
Sequencing Taillight Kit (L58-TSK)
Make your own Sequencing Taillights with our new kit. Provides modules, connectors and instructions to turn your three-lights-per-side taillights (bulb or LED) into sequencing taillights. If your have only (2) light segments that you want to have flash alternately.
Not compatable with modern vehical Body Control Modules.
SKU: L58-TSK -
-
Hot Rod Wiring Materials
3/8″ Black or Red Power Post 160A Plus 8 Connections (8 X 20A)
- Connect several wire/cables to a central location
- (8) #8-32 connection points carry up to 20 amps each at 12 VDC
- Maximum voltage: 48 VDC
- Connection Post: Stainless steel
- Conductive Disk: Nickel-plated copper alloy
- Conductive Nuts: Tin-plated copper alloy
- Mechanical fastener nuts: Stainless Steel
- Mounting Center: 2.5″ (63.5mm)
SKU: WI-38 -
Hot Rod Wiring Materials
4-Fuse Raised Add-on Fuse Blocks L60-4
Each fuse circuit is fed separately. Rated 30 amps max per fuse. Bottom blade input and output and the terminals are provided, as well as the mounting screws. Overall dimensions are: 4 fuse = 2-1/2″ long x 1″ wide x 2-1/4″ high, including the protective dust cap. For ATO/ATC type fuses.
SKU: L60-4 -
Relays/Flashers
40 Amp Double Throw Relay SPDT (L07D-40)
40 amp SPDT (double throw) relay that lets you switch between two outputs, ON/ON switching. Can be wired as an anti-theft device with a horn alarm feature so that the horn blows if someone tries to start the car without activating the secret circuit or switch.
SKU: L07D-40
