Billet Firewall Trim
The parts: male & female electrical plugs with preinstalled 16 ga., 24” wire leads, billet support frame, billet plug cover, hardware, connectors and gasket. |
Billet Electric Firewall Plug
An attractive and convenient alternative to firewall ports, this Electric Plug allows you to connect/disconnect your front end or other wiring. Electrical work is easier during construction, modification or trouble shooting/repair. Once installed, the plug screws together for a secure connection. Has 8 circuits, each with 16 ga. wire, GM color coded. 10 amp rating per circuit. 3/16" maximum firewall thickness. Gasket included.
|
Plug cover, installed, is 2" tall x 1-1/2" wide x 7/8" deep. Clean wire exit flush to the surface. |
Billet Wire Port
Here is a great way to dress up the area of the firewall where
the wiring harness goes through. The Wire Port main body
is 2" dia. with a 1-1/2" inside dia. and is secured to the firewall
around the wire bundle hole with four (4) truss head screws.
A 1" x 13/16" deep cut-out in the Wire Port body allows the
wire bundle to exit close to the firewall (a rubber grommet is
included for smaller wire bundles). The body is then capped
off with an attractive machined cover which has three (3)
ball-milled grooves. The design allows for the wire bundle
to be installed before the final attachment of the Wire Port is
done. Attractive, functional and at a very reasonable price.
|
|
Billet Wire Pass-through
A really attractive way to dress up the area where the wires come through the firewall. Unit measures 1-1/2" wide X 2" tall X 1" deep with a wire exit size of 1" wide X 3/4" deep. Blind fastens from behind for that smooth look.
Hardware and template included.
|
  |
Pass Through Trim
For use with wires, bundles, harnesses, cables, etc. Has an insulated rubber grommet with 5/8" I.D. Overall size is 2-1/4" O.D. with stainless steel screws. |
 |
Or use our Split 'n' Pinned version that was designed specifically for use with the Howell Engineering TPI and TBI harnesses. Has smaller #4 screws that are closer to the outer edge to cover a hole up to 1-5/8" wide.
|
#B01ST (Split 'n' Pinned) |
$24.00 |
Rod-Bits:
Our Billet Firewall Trim is an excellent example of how we develop products at Watson's StreetWorks - by you, our customers, telling us what you want and need for your ride. Unfortunately, not every idea fits into our product line. We try to stay close to what we know about, which is pretty much machined parts and electrical items. But please don't stop asking. If you have an idea or suggestion, go to our Home page - near the bottom you will find a "New Product Idea" Button for sending an email. Better yet, give us a call. We might already know of someone making exactly what you need... heck, it might even be US!
We would be remiss if we didn't mention that all parts you see are not created equally. Our Billet Firewall Trim is sold by a number of our dealers, but there are also copy-cat imitators out there. Please look for the Watson's StreetWorks name and logo when you buy - you'll know that you are getting the real-deal, backed up by years of knowledge and support that's matched by none. Thanks.
|
