LED Taillights

Confused about taillight functions and LED taillights? Helpful Tip: Talkin' about Taillights.

IMPORTANT NOTICE ABOUT LED TAILLIGHTS

LED Taillights from Watson's StreetWorks are designed and intended for use in American Manufactured vehicles that originally had a single1157 bulb taillight manufactured before approximately 1980. Vehicles manufactured after that time and foreign vehicles often had separate turn signals and/or special flashers that make the use of these lights more difficult or impossible. It is your responsibility to be aware of the type of system that your vehicle has before buying LED taillights. If you choose to install these lights on that type vehicle, we will attempt to help make things work, but you do so at your own risk. Additional parts, resistors, diodes or the like will be needed.

Oval Chrome Billet Hot Rod Mirrors with Front and Rear Facing LED's These classy Oval Chrome Billet Aluminum Mirrors have built-in LED's. Ten forward facing amber LED's work as both park lights and turn signals. Five rear facing red LED's are turn signal indicators. Each mirror is 3-1/4" X 5-1/4". Provided with three different sets of mounting hardware to better match your installation needs. This product is covered by a one year/12,000 mile Warranty by the manufacturer, Muth Mirror Systems.

One-Piece Hot Slot LED Taillight Kit

We've put 120 super bright red LED's into a single, one-piece taillight kit - single slot red lens measures 30-3/4" long X 1/2" wide to provide an uninterrupted, smooth look. Diffuser attached. Will work in surfaces with gradual curvature up to about 2-1/2". The LED's are dual intensity for taillights and brake/turn signals and are premounted into an aluminum housing. We also provide an aluminum "spacer box" to fill the gap created by body curvature and to seal out dirt and water - simply cut to the contour of the body. Weld-in or glass-in studs for mounting are included. Note that this is a build-in kit requiring extensive paint and body working skills.

Need the lens for your own project?

Rectangular Flush Mount LED Taillights
and 3rd Brake Light

HOT SLOTS !

A BIG and LONG cut above the rest! The 60 LED strips fit inside an aluminum housing and mount behind build-in, flush mounted acrylic lenses which have clear prismatic diffusors. The 1/4" thick acrylic lenses allow you to fit these lights into curved fenders, roll pans and pickup bed corners and form them for that seamless look (the acrylic lenses are not intended to be bent). Taillight Hot Slots have dual intensity for taillights and turn-brake lights. The 3rd Brake Light

 Hot Slot is single, full intensity. They need approximately 1" of clearance space behind the fender surface. Weld-in or glass-in studs for mounting are included, as well as quality instructions.

Taillight Hot Slots - The acrylic lenses are only 1/2" wide by 15-1/4" long! Red LEDs shine through red lenses with diffusers.

#L58 (Pair)

$195.00

3rd Brake Light Hot Slot - The acrylic lens is only 1/2" wide by 15-1/4" long! Red LEDs shines through a red lens with diffusor.

#L58B (One)

$95.00

---

Sequencing 60 LED 3rd Brake Light

Get their attention with our Sequencing 60 LED 3rd Brake Light. It's split 10-10-20-10-10 and sequences inside-out once when the brakes are first applied then stays on solid. Flush mounting, build-in lens is 1/2" wide X 15-1/4" long.

#L58B-SEQ Make this light into an extra taillight, too. Just add this convertor.	$145.00
#L58B-SEQ-CON	$25.00

---

Sequential LED Taillights ! A real attention getter!  Our #L58 taillights above, but three steps better.  Each light is split into three groups of 20 LED's that sequence inside-out with the turn signals.  Brake lights quickly sequences once then all stay on. All the necessary convertors and sequencing modules are included along with great instructions. Includes dummy loads for flasher operations.

---

Sequencing LED Taillights for cars with Separate Turn Signals These taillights are split 30-10-10-10 so that the inner 30 LEDs are the brake light and taillight and the outer 30 sequence 10-10-10 with the turn signals so they work on cars that originally had separate turn signals. Flush mounting, build-in lenses are 1/2" wide X 15-1/4" long. With hardware and instructions.

#L72-SEQ

$299.00

Additional resistors may be required for your application.
(Separation at right shown for the left taillight unit.)

Small Hot Slot Taillights - #L58SM (Pair)	$150.00
Small Hot Slot 3rd Brake Light - #L58SMB (One)	$75.00

Small Hot Slot Taillights - #L58SMBT

$95.00

'Skinny' Hot Slot 3rd Brake Lights Our Small Hot Slots 3rd Brake Lights with an Ultra Skinny clear lens - it's 7-1/2" long but just 1/4" wide (about .230", actually) for that disappearing-3rd-brake-light effect. And it's a full 1/2" deep to let you work it into a spot with more curvature. 30 bright red LED's in an aluminum housing, wire leads and mounting hardware.

Small Sequential LED Taillights ! Our #L58SM taillights above, but three steps better. Each light is split into three groups of 10 LED's that sequence inside-out with the turn signals. Brake lights quickly sequences once then all stay on. All the necessary convertors and sequencing modules included, with great instructions.

Billet Frames for StreetWorks L58SM Series LED Lights If you aren't into flush mounting taillight or 3rd brake light lenses into the body, these stunning machined billet aluminum frames work with our L58SM kits to allow you to surface mount the lens on the outside of the sheet metal while the LED's and housing attach to the inside. The small L58SM Frame is 9" long X just under 1" wide. It will protrude .400" off the surface. They accept our lenses perfectly (as shown). All other parts (lens, LED's, housing, etc) are in the flush mount kits, just add these frames for flat surface mount installation. 3rd Brake Light kits need one frame, Taillight Kits need two frames.

Deep Mount Small Hot Slots ! Flush Mounts For Curved Surfaces Now for the first time, install flush mounted lights into curved surfaces! Our deep acrylic lenses and steel support boxes allow you to contour the flush mount surface as much as 3 inches. Fit into curved fenders or under curved rear windows. 30 Super Bright Red LED strips per light.  Lenses are only 1/2" wide by 7-1/2" long! (Surface dimension will vary due to curvature.) These are a weld-in or glass-in kit requiring very good body working skills.

#L58SMBT-DP

$145.00

#L58SM-DP-SEQ (Pair)

$325.00

Amber Hot Slot Park/Turn Signal Our kit features (2) - 4 Super Bright Amber LED units with diffuser lenses that mount inside aluminum housings, included. 1/2" thick build-in, flush mounted clear acrylic lenses to fit into slightly curved fenders for a seamless look. (The acrylic lenses can not be bent. The acrylic is body worked to be flush with the fender surface.)  The lenses are only 1/2" wide by 1-3/4" long! Kit includes dual intensity convertors to give park lights and turn signals. Need only 1" of clearance space behind the mounting surface. Weld-in or glass-in studs for mounting are included. Quality instructions. Really cool stuff!

Amber and Red LED Lights 4-LED lights for Do-It-Yourself projects. Each light is 5/8" wide X 5/16" deep (overall) X 2-1/8" long. The lens housing has built-in diffuser. 12 vdc with wire leads.

Flush Mount White LED Backup Light Kit 12 Super Bright White LEDs in a Flush Mount, build-in kit. The acrylic lens is clear 1-1/4" diameter X 1/4" thick to allow sanding to fit into slightly curved surface. Needs only 1" of clearance space. Weld-in or glass-in studs for mounting the aluminum LED housing. With installation hardware and instructions.

Do-It-Yourself Bright White LED Dot 12 Bright White LED's for Do-It-Yourself projects. Dot measures 1-1/4" Diameter X 1/2" high. 12 VDC with wire leads and adhesive on back. As a Do-it-yourself item, this part is sold without warranty.

#L70 Adaptor for Independent T/S Vehicles

$45.00

#L52DL2 (Sold only in Pairs)

$9.00/Pair

Electronic Flasher for LED's ● Replaces standard flashers when using LED's for turn signals. ● 90 flashes per minute at any load. ● Three 18" wire connections - 2 terminals fit into flasher receptacle, plus ground. ● Terminals provided. ● Works with LED's and regular bulbs. ● Rated at 10 amps maximum. ● Small 2" x 2" x 3/4".

#AM-02 (each)

$55.00

#AM-01 (each)

$30.00

Billet Pedestal LED 3rd Brake Light
with Turn Signals

We've taken Pedestal 3rd Brake Lights to a new level! This gorgeous piece is 16-5/8" wide, 3/4" high (body), 1-1/8" deep and only 2" tall including the swivel base. 60 super bright red LED's are split into 3 groups of 15-30-15 so that you have a 30 LED center 3rd brake light and (2)-15 LED turn signal/ brake lights. You could also add our LED Conversion Kits to get taillight and turn/brake or wire then all as one big and bright 3rd brake light. You've gotta' love this!

#L61

$190.00

Small Billet Pedestal 3rd Brake Light with Turn Signals 8-7/8" wide, 3/4" high (body), 1-1/8" deep and only 2" tall including the swivel base.    30 super bright red LED's.     2 groups of 15-15 provide (2)-15 LED turn signal/brake lights.   Or add our LED Conversion Kits to get taillight and turn/brake or wire them all as one 3rd brake light.

Billet Pedestal Extension Extends the mounting base on either of the Billet Pedestal lights, above by 2-7/8" allowing them to be adjustable in height and position. Fit split window rods or vehicles with glass curvature where the light can not be mounted directly at the glass edge.

#L61-EXT

$35.00

Amber LED's for Do-It-Yourself projects. All strips are 3/8" wide X 1/2" high (overall) X the length listed below. As Do-it-yourself items, these are sold without warranty.

NOTE: These are single intensity lights. Should you want them to work like a dual intensity light, for example as an auxiliary running light (less bright) and turn signal (full bright), you will also need to purchase our conversion kit.

LED Conversion Kit

Make any of the 3rd brake light LED's on this page act like a double filament light - diminished intensity for taillight and full intensity for brakes/turn signals. One needed for each LED brake light.

#P-RLM (Red translucent acrylic, each)	$15.00
#P-RLD (Red translucent acrylic with diffuser, each)	$25.00