Award Winning LED Turn Signal/High Beam Indicator, LED Gear Shift Indicator and Combination LED Turn Signal/ High Beam and Shift Indicator. Each comes on an easy-to mount Aluminum plate. They’re compact – only 5/8″ x 1-7/8″ and just 1″ x 1-7/8″ for the Combo. Wire leads and instructions are included. 12 vdc. Shift Indicators require a sending unit.
| Weight | 0.00000000 lbs |
|---|---|
| Dimensions | 0.00000000 × 0.00000000 × 0.00000000 cm |
| Indicator Type | Shift Indicator – 3 speed, Indicator – Over Drive |
You may also like…
-
Hot Rod Ignition Security Systems
RFID Ignition Security Unit
This all new StreetWorks RFID is designed to work with your Hot Dot Ignition Systems or your existing key. ย This is the security system that your hot rod has been missing.
As you may already know the โHOT DOTโ ignition takes the place of your conventional โkeyedโ ignition switch however it has no security built in.ย This all new RFID Security system gives you the security and convenience that today’s society demands.
What is RFID?ย
RFID stands forย Radio-Frequency Identification. The acronym refers to small electronic devices that consist of a small chip and an antenna.ย The RFID device serves the same purpose as magnetic strip on the back of a credit card; it provides a unique identifier for that object. And, just as a magnetic strip must be scanned to get the information, the RFID device must be scanned to retrieve the identifying information.
The RFID unit has 3 different operating modes.
Mode 1:ย High security mode. The car only starts and stays running with the RFID fob in range.
Mode 2:ย Medium security mode. The RFID fob must be in range for car to start and will stay running until the operator turns it off, then it wonโt restart.
Mode 3:ย NO security mode. Should your fob become lost or damaged you can over-ride the system by entering a code with the hidden button switch.
The RFID is capable of working between 5 and 200 feet with the vehicleโs windows closed.ย If the vehicleโs windows are open we do not have a measurement for how far away the unit will work. ย There are 8 increments of sensitivity that the unit can be programmed to.
SKU: WI-RFID -
Hot Rod Ignition Switch Systems
Hot Rod Push Button Starter Switch Kit
Push our Ignition Switch button once and your accessory circuit comes on. A second push and hold engages the starter. When your engine starts just release the switch and your running as well as the LED indicator ring. Press it once more and everything turns off. This gorgeous Stainless steel (22MM) switch mounts in a 7/8″ diameter hole with the overall size of 1′.ย ย The compact ignition module can hide under your dash or in the engine bay.
This kit will work with our smaller (16MM) momentary push button but be warned guys; youโll be using your pinky.
Compare our price to any other Single Switch Ignition System anywhere! We were the first to bring this system to the street rod market and we know how to do it best!
Check out our full line of matching low profile, push button switches and indicator lights.
Note this unit requires securing your car. Check out our battery disconnects or simply install a hidden kill switch or, look at ourย RFID unit.
SKU: 12***
Related products
-
Uncategorized
Cool-Tape – Heat Reflective Tape (DE-CT)
Cool Tape is a flexible and super strong self-adhesive thermal insulating tape capable of protecting up to 2000ยฐF of radiant heat. Made of one mil aluminized material bonded to a woven glass fiber heat resistant matting, Cool Tape is a ultra light weight heat reflective solution for wrapping wires, cables, hoses, fuel lines, covering seams and many other uses. ย Comes as a 2″ x 30′ roll.
- Withstands direct heat up to 400ยฐF and 2000ยฐF radiant heat
- Flexible and easy to apply
- Strong self-adhesive backing
- Use to secure panels, seal air boxes, wrap wiring & more
SKU: DE-CT -
Uncategorized
Floor & Tunnel Shield II – Heat & Sound Insulation (DE-TS)
SAME GREAT PRODUCT, NEW DESIGN!
Designed to provide the best possible heat protection in areas where high temperatures are always present and problematic, Floor & Tunnel Shield II limits heat transfer on fire walls, transmission tunnels, floor boards, fuel cells and other areas where heat is an issue.ย Floor & Tunnel Shield II provides excellent light weight thermal protection, acts as a guard against track and road debris, and provides sound deadening as well.
Constructed with an embossed 10 mil aluminum face bonded to 1/8โ composite glass-fiber core and backed with a high temp super strong pressure sensitive backing, Floor & Tunnel Shield II withstands up to 1750ยฐF of direct continuous heat. The adhesive side holds past 450ยฐF. Its improved multifaceted modern aluminum surface offers improved reflectivity and rigidity and allows for ease of installation. At only 3/16โ thick, this product can be shaped and trimmed for a custom fit and is ideal for minimal clearance areas.
With a unique and patented finely woven glass-fiber backing, Floor & Tunnel Shield II is the easiest, most cost effective way to control thermal transfer while protecting expensive components and vehicle occupants from extreme heat situations and sound.
Floor & Tunnel Shield II can be used on any number of surfaces including, metal, aluminum, carbon fiber, plastic, and more. Multiple uses include: fire walls, under hoods, transmission tunnels, floor pans, fuel cells, and exterior under vehicle locations โ anywhere to reflect damaging heat.
Use as a barrier to reflect and insulate from any heat source.
Available in 21″ x 24″ sheets
- Ideal for firewalls, under-vehicle, floor pans, oil tank box areas, transmission tunnels, wrapping fuel cells, under hoods & more
- Blocks radiant heat from entering driver compartment
- Withstands direct high heat temperatures up to 1750ยฐ
- Serves as a barrier to unwanted road, tire, & engine noise
- Constructed from 10 mil aluminum bonded to finely woven layer of high temperature resistant glass fiber
- Easy to form to shapes and contours
- Excellent heat & sound barrier
- Wind and water will not affect adhesive
- Minimum clearance required, only 3/16โ thick
- Just trim, peel & stick
- Aggressive self-adhesive backing holds past 450ยฐF
- Withstands 1750ยฐF direct continuous heat
- Use to shield & reflect unwanted heat
- Multiple uses
- Adheres to almost any surface or material including to fiberglass
What’s in it for you…
- Protection for engine compartments
- Protection for painted body panels
- Comfortable interior at any temperature
- Quick and easy installation
- Hi-temp adhesive for a “do-it-once” install
Where to use:
- Fire walls
- Transmission tunnels
- On floor boards above header collectors, Catalytic converters, Mufflers and exhaust pipes
- Fuel cells
- Motorcycle fairings
- Engine covers (dog house)
- Marine & RV compartments
- Reflect turbo heat
SKU: n/a
