Hot Rod Lighting
Showing 61–80 of 80 results
-
Hot Rod Exterior Lighting
Brakelighter 12 Volt 3rd Brake Light (65515)
Now you can feel safe knowing the cars behind you will see your brake lights. This slick little unit attaches to the inside of your rear window. For easy removal when youโre at aย judged show attach the light with the included suction cups. For a more permanent installation double sided tape is also included.ย The light is divided into 3 sections, letting you use it for turn signals as well as brake lights. Works with either positive or negative ground vehicles. Instructions included. This light is 12 โ long , 5/8โ tall & 7/8โ deep.
SKU: 65515 -
Hot Rod Exterior Lighting
Brakelighter 6 Volt LED 3rd Brake light
Looking for more LIGHT in the rear of you 6V vehicle? We now have a Led 3rd brake light that will wire into you 6v system. The light meassures 12″ long, 5/8″ high and 7/8″ deep. Mount the light on to your back window using either the 2 way tape system or a temporary install with the suction cup system so you can take it down when you get to that classis car show. There are multiple wiring diagramsย to follow depending on if you what your turn signals to be wiried into the light or not. This light comes with everything you need to complete the install fast and easy.
Note: If your rear window is at an angle and the light will point more up than back ask about theย swivel mounting system!
SKU: 65504 -
Hot Rod Exterior Lighting
Brakelighter Clip Package
Optional mounting clip package.ย ย If your rear window is slanted, curved or split glass you may want to order the optional mounting clip pack. It includes brackets and the necessary hardware to adjust the light to the perfect viewing angle.
SKU: 65526 -
-
Hot Rod Exterior Lighting, Hot Rod LED Brake Lights
Retro Round Micro 3rd Brake Light (EL-MBRX)
The Retro Roundย Micro 3rd Brake Light is designed to get a driverโs attention, yet at only 2ยฝโ by ยฝโ by 1 3/8′ it goes nearly un-noticed on the car. Tiny yes, but we’re using powerful CREE style LEDs to put out tons of bright red light.ย Surface mount or flush mount versions are available.
SKU: EL-MBR -
Hot Rod Exterior Lighting
Billet Pedestal Third Brake Light with Turn Signals (L61)
We’ve taken Pedestal 3rd Brake Lights to a new level! This gorgeous piece is 16-5/8″ wide, 3/4″ high (body), 1-1/8″ deep and only 2″ tall including the swivel base. 60 super bright red LED’s are split into 3 groups of 15-30-15 so that you have a 30 LED center 3rd brake light and (2)-15 LED turn signal/ brake lights. You could also add our LED Conversion Kits to get taillight and turn/brake or wire then all as one big and bright 3rd brake light.
SKU: L61 -
Hot Rod Exterior Lighting
Billet Third Brake Light, Clear Lens! L61C
The BEST pedestal 3rd Brake Lights.ย Clear lens – 15% brighter!ย 16-5/8″ wide, 3/4″ high (body), 1-1/8″ deep and only 2″ tall including the swivel base.ย 60 super bright red LED’s.ย 3 groups of 15-30-15 provide a 30 LED center 3rd brake light and (2) – 15 LED turn signal/brake lights.ย Or add our LED conversion kits to get taillight and turn/brake or wire them all as one big and bright 3rd brake light.ย (L61C)
Now also with Amber Turn Signals!
Now get this light with the center 35 red LED’s as a dedicated brake light and each end with 8 super bright amber LED turn signals – really bright and super visible to make your ride safer than ever.ย (L61CA)
SKU: L61C -
Hot Rod Exterior Lighting
Billet Third Brake Light with Amber Turn Signals
The BEST pedestal 3rd Brake Lights.ย Clear lens – 15% brighter!ย 16-5/8″ wide, 3/4″ high (body), 1-1/8″ deep and only 2″ tall including the swivel base.ย 60 super bright red LED’s. ย Now get this light with the center 30ย red LED’s as a dedicated brake light and each end with 15ย super bright amber LED turn signals – really bright and super visible to make your ride safer than ever.ย (L61CA)
SKU: L61CA -
Hot Rod Exterior Lighting, Hot Rod LED Brake Lights
Small Billet Pedestal Third Brake Light with Turn Signals (Red Lens)(L61SM)
Hot Rod Exterior Lighting, Hot Rod LED Brake LightsSmall Billet Pedestal Third Brake Light with Turn Signals (Red Lens)(L61SM)
We’ve taken Pedestal 3rd Brake Lights to a new level! This gorgeous piece is 8-7/8″ wide, 3/4″ high (body), 1-1/8″ deep and only 2″ tall including the swivel base. 30ย super bright red LED’s are split into 3 groups of 10-10-10 so that you have a 10 LED center 3rd brake light and (2)-10 LED turn signal/ brake lights. You could also add our LED Conversion Kits to get taillight and turn/brake or wire then all as one big and bright 3rd brake light.
SKU: L61SM -
Hot Rod Exterior Lighting, Hot Rod LED Brake Lights
Small Billet Third brake light, Clear Lens (L61SMC)
Hot Rod Exterior Lighting, Hot Rod LED Brake LightsSmall Billet Third brake light, Clear Lens (L61SMC)
We’ve taken Pedestal 3rd Brake Lights to a new level! This gorgeous piece is 8-7/8″ wide, 3/4″ high (body), 1-1/8″ deep and only 2″ tall including the swivel base. 30ย super bright red LED’s are split into 3 groups of 10-10-10 so that you have a 10 LED center 3rd brake light and (2)-10 LED turn signal/ brake lights. You could also add our LED Conversion Kits to get taillight and turn/brake or wire then all as one big and bright 3rd brake light.
Our Small Billet Pedestal 3rd Brake Light is also 15% brighter and still with built-in turn signals. 30 super bright red LEDโs behind a clear lens with diffuser. (L61SMC)
OR
Clear lens light with 15 center red LED’s and 4 bright amber LED’s at each end. (L61SMCA)
SKU: L61SMC -
Hot Rod Exterior Lighting
L61 Third Brake Light Billet Pedestal Extension (EL-61E)
Extends the mounting base on any of the Billet Pedestal lights, above by 2-7/8″ allowing them to be adjustable in height and position. Fit split window rods or vehicles with glass curvature where the light can not be mounted directly at the glass edge.
SKU: EL-61E -
Custom Marker Lights, Hot Rod Exterior Lighting
Three 1″ Auto Interior LED Lights (L86 Series)
These bright little 3-LED lights have a variety of uses. They are 1″ diameter overall and mount into a 3/4″ diameter hole. Reds and Ambers are SAE/DOT rated as clearance lights. Provided with an optional stainless steel trim ring.
SKU: L86 -
Custom Marker Lights, Hot Rod Exterior Lighting
6-LED Interior and Marker Lights, L96 Series
Great little 6-LED lights have a variety of uses. They are 1-13/16โ diameter overall and mount in a 1-3/8โ diameter hole. Red and ambers are SAE/DOT rated as clearance lights. Provided with an optional stainless steel trim ring.
SKU: L96 -
Hot Rod Exterior Lighting
LED Light’N Boltz License Plate Light Assembly Kit
Polished Stainless Steel Dome-head bolts with LED’s to illuminate your license plate. 5/16-18 x 3/4″ threaded bolts. 2 dome-head mounting/illumination bolts with LED’s plus 2 button-head mounting bolts without LED’s. Includes nuts, wire leads. 12 vdc. Set of four as shown. From Design Engineering Inc.
SKU: DE-LNB4 -
Hot Rod Exterior Lighting
1156 White LED White Bulbs, Pair (EL-56W)
Finally, an 1156ย LED replacement bulb that can be seen from all directions. These single element bulbs will work in your existing sockets. ย It comes with 4 bright LEDs on the sides as well as the tip. It measures less than 2 ยผโ long by ยพโ wide. These LED replacements shine brighter than their original counterparts offering a visually appealing brightness. These LED lights will provide years of trouble free service.ย Sold in pairs.
SKU: EL-56W -
Hot Rod Exterior Lighting
1157 LED Amber Bulbs, pair (25024)
Finally, an 1157 LED replacement bulb that can be seen from all directions. These dual element bulbs will work in your existing sockets.ย It comes with 4 bright LEDs on the sides as well as the tip. It measures less than 2 ยผโ long by ยพโ wide. These LED replacements shine brighter than their original counterparts offering a visually appealing brightness. These LED lights will provide years of trouble free service.ย Sold in pairs.
SKU: 25024 -
Hot Rod Exterior Lighting
1157 LED Red Bulbs, pair (25012)
Finally, an 1157 LED replacement bulb that can be seen from all directions. It comes with 4 bright LEDs on the sides as well as the tip. It measures less than 2 ยผโ long by ยพโ wide. These LED replacements shine brighter than their original counterparts offering a visually appealing brightness. These LED lights will provide years of trouble free service.ย Sold in pairs.
SKU: 25012 -
Hot Rod Exterior Lighting
Water proof LED Strips
These LED strips are encased in clear waterproof plastic so use them where ever you want. They have peal & stick backing and just to be sure we include mounting clips as well. Each flexable strip is 1/2″ wide and about 1/4″ thick. We sell them in lenghts from 2″ย to 36″, and they come in 5 colors, red, amber, blue, cool white and warm white. Each light you order has lead wires attached.ย The strips are marked in 2″ segments (3 LEDs per segment). You can actualy cut them at the marking, attach new leads, seal the ends and you have a 2nd light!
Prices range from just $8.00 for a 2″ strip up to $84.00 for a full 36 inches. Click on the “add to cart” box to select your color & length.
Get creative! From foot box or trunk lights to full blown under car ground effect lighting this is the solution you’ve been looking for.
SKU: 23*** -
-
Frequently Asked Questions About Hot Rod Lighting
What types of lighting are available for hot rods at Watsonโs StreetWorks?
Watsonโs StreetWorks offers a wide range of hot rod lighting options, including LED headlights, taillights, and interior marker lights. We provide both functional and decorative lighting solutions, ensuring your vehicle looks as good as it performs, both inside and out.
Why should I consider upgrading to LED lights for my hot rod?
LED lights are preferred for hot rods due to their longer lifespan, improved brightness, and lower energy consumption compared to traditional bulbs. They provide enhanced visibility and safety while driving, and their durability makes them a cost-effective choice for long-term use.
How do I choose the right lights for my hot rodโs specific needs?
Choosing the right lights for your hot rod depends on several factors, including the specific model of your vehicle, desired aesthetic, and legal requirements. Consider what you primarily need the lights forโwhether it's for improved visibility or aesthetic enhancement. Itโs also important to check the compatibility of the lights with your vehicleโs existing electrical system.