accent
Showing all 13 results
-
Car Interior LED Lights
LED Interior Light with Switch (L85)
A sweet littleย LEDย Interior Light. The lens measures just 7/8″ x 3″ and when you rotate the lens either way, the light turns on. It can also be externally switched. Install with the oval mounting flange showing (it’s 2-1/16″ x 5″) or hide it behind the mounting surface with just the lens showing. Needs about 1-1/4″ rear clearance. Screws included.ย Comes with a chrome bezel that covers the black plastic shown in the picture.
SKU: L85 -
Car Interior LED Lights
Glove Box/Trunk tilt Switch Kit (L03)
Turns on lights in your glove box, trunk or under yourย hood. Kit includes the switch, mounting screw, and a bright warm white LED strip. The tilt switch has a clear plastic housing to check its operation. The LED strip has adhesive tape for easy and strong mounting.
SKU: L03 -
Car Interior LED Lights, Courtesy Lights
Bright White Illuminator LED Interior Accent Lighting
A little bigger and a little brighter than the Bright Blue LED. Use for interior accent lighting (not for courtesy or dome lights), license plate lights (2 minimum recommended), glove box, ash tray and a hundred other uses. It’s small size makes it easy to snap into a 1/4″ diameter hole or just RTV or epoxy in place. NOTE: This LED is too bright for use as an indicator light! See our LED Indicators under Indicator Lights.
SKU: L18BRW-1/4 -
Car Interior LED Lights
Blue LED Illuminator
An LED that’s bright enough to use for illumination? YES! Leave it to StreetWorks to find it. Use this little beauty for lighting up your glove box or ash tray, add accent lighting inside or out (imagine putting one in each of the hood holes of an old Oldsmobile!) It’s very small size makes it easy to snap into a .156″ hole or just RTV or epoxy in place. Pale blue color provides a nice hue at night. NOTE: This LED is too bright for use as an indicator light! See our LED Indicators under Indicator Lights.
SKU: L18BRB-5/32 -
Aftermarket Backup Lights for Hot Rods, Hot Rod Exterior Lighting
7-1/2″ White Running Light with Amber Turn Signal (L58SM-WACL)
Aftermarket Backup Lights for Hot Rods, Hot Rod Exterior Lighting7-1/2″ White Running Light with Amber Turn Signal (L58SM-WACL)
State of the art Flush Mount styling for the front of your ride. Each light contains aย cluster of Bright White LED’s –ย for running or backup lights AND (12) Super Bright Amber LED’s for Turn Signals. Flush Mount Clear Lenses are 1/2″ wide x 7-1/2″ long x 1/4″ thick with diffuser. Mounting hardware included.
SKU: L58SM-WACL -
Car Interior LED Lights
White or Blue Low Profile Illuminator LED
Use these 3/8″ square, surface mount LEDsย for interior accent lighting, license plate lights (2 minimum recommended), glove box, ash tray and a hundred other uses. These low profile lights can be put just about anywhere you want with the double sided adhesive we include. Available in blue or white. 100% Weatherproof.
SKU: L91 -
Custom Marker Lights, Hot Rod Exterior Lighting
Three 1″ Auto Interior LED Lights (L86 Series)
These bright little 3-LED lights have a variety of uses. They are 1″ diameter overall and mount into a 3/4″ diameter hole. Reds and Ambers are SAE/DOT rated as clearance lights. Provided with an optional stainless steel trim ring.
SKU: L86 -
Custom Marker Lights, Hot Rod Exterior Lighting
6-LED Interior and Marker Lights, L96 Series
Great little 6-LED lights have a variety of uses. They are 1-13/16โ diameter overall and mount in a 1-3/8โ diameter hole. Red and ambers are SAE/DOT rated as clearance lights. Provided with an optional stainless steel trim ring.
SKU: L96 -
Hot Rod Exterior Lighting
LED Light’N Boltz License Plate Light Assembly Kit
Polished Stainless Steel Dome-head bolts with LED’s to illuminate your license plate. 5/16-18 x 3/4″ threaded bolts. 2 dome-head mounting/illumination bolts with LED’s plus 2 button-head mounting bolts without LED’s. Includes nuts, wire leads. 12 vdc. Set of four as shown. From Design Engineering Inc.
SKU: DE-LNB4 -
Hot Rod Exterior Lighting
Water proof LED Strips
These LED strips are encased in clear waterproof plastic so use them where ever you want. They have peal & stick backing and just to be sure we include mounting clips as well. Each flexable strip is 1/2″ wide and about 1/4″ thick. We sell them in lenghts from 2″ย to 36″, and they come in 5 colors, red, amber, blue, cool white and warm white. Each light you order has lead wires attached.ย The strips are marked in 2″ segments (3 LEDs per segment). You can actualy cut them at the marking, attach new leads, seal the ends and you have a 2nd light!
Prices range from just $8.00 for a 2″ strip up to $84.00 for a full 36 inches. Click on the “add to cart” box to select your color & length.
Get creative! From foot box or trunk lights to full blown under car ground effect lighting this is the solution you’ve been looking for.
SKU: 23*** -
-
