flush mount
Showing all 7 results
-
Hot Rod Exterior Lighting, Hot Rod LED Brake Lights
Flush Mounted LED Tail Light Strip
For integral or separate Turn Signals! Each light is split 40-20 so that the LEDโs can be wired for either type of turn signal. 60 Super Bright Red LED strips inside aluminum housings. 1/4″ thick build-in, flush mounted red acrylic lenses with prismatic diffusers – can be fit into slightly curved fenders, roll pans and pickup bed corners up to 1/4″ for a seamless look (the acrylic lenses cannot be bent). Taillights have dual intensity for taillights and turn-brake lights. Need only 1″ of clearance space behind the mounting surface. Weld-in or glass-in studs for mounting are included. Quality instructions. Lenses are only 1/2″ wide by 15-1/4″ long! Note that these are build-in kits requiring paint and body skills.
SKU: L58 -
Hot Rod Exterior Lighting, Hot Rod LED Brake Lights
Small (7-1/2″) Red Hot Slot LED Light Kit (L58SM)
Hot Rod Exterior Lighting, Hot Rod LED Brake LightsSmall (7-1/2″) Red Hot Slot LED Light Kit (L58SM)
Build-in, flush mount LED Light Kit with Redย LED’s and Red lenses. 30 super bright Red LED’s premounted inside each aluminum housing. 1/4″ thick amber acrylic lenses with prismatic diffusers. Lights have dual intensity for use as running light andย turn signal and brake ligh. Needs only 1″ of clearance space behind the mounting surface. Weld-in or glass-in studs for mounting are included. Lenses are 1/2″ wide X 7-1/2″ long.
SKU: L58SM -
Hot Rod Exterior Lighting, Hot Rod LED Brake Lights
Small (7-1/2″) Amber Hot Slot LED Light Kit (L58SM-AMB)
Hot Rod Exterior Lighting, Hot Rod LED Brake LightsSmall (7-1/2″) Amber Hot Slot LED Light Kit (L58SM-AMB)
Build-in, flush mount LED Light Kit with amber LED’s and amber lenses. Super bright amber LED’s are premounted inside each aluminum housing. 1/4″ thick amber acrylic lenses with prismatic diffusers. Lights have dual intensity for use as running light and turn signal. Needs only 1″ of clearance space behind the mounting surface. Weld-in or glass-in studs for mounting are included. Lenses are 1/2″ wide X 7-1/2″ long.
SKU: L58SM-AMB -
Custom Marker Lights, Hot Rod Exterior Lighting
Side Marker Flush Mount Kit (EL-SMK)
This is a complete sidemarker kit that includes a pair of amber and a pair of red flush mount marker lights.ย These lights use our new “skinny” flush mount lens that measures only 1/4″ X 1 3/4″.
Kit Includes:
- 2 – Red Waterproof 3 LED Buckets
- 2 – Amber Waterproof 3 LED Buckets
- EL-SMK: ย ย 4 – 3/8โ Thick clear acrylic lenses for build-in flush installation with a small ยผโ X 1 ยพโ size
- EL-SMK5: ย 4 – 3/8″ Thick clear acrylic lenses for build-in flush installation with a medium 1/2″ X 1 3/4″ size.
- Hardware Pack
NOTE:ย This is a build-in kit requiring body working skills and is intended for vehicles that are under construction or modification.
SKU: EL-SMK -
Hot Rod Exterior Lighting
Flush Mount Red LED Third Brake Light with Turn Signals
Like our full size Hole Slot lights except with 30 Super Bright Red LED’s. A single intensity light but split 10-10-10 so that your turn signals will also be displayed. (Can also be wired as one solid 30 LED unit.) Red lens is1/2″ wide by 7-1/2″ long.
SKU: L58SMBT -
Hot Rod Exterior Lighting
Flush Mount Sequencing 60 LED 3rd Brake Light (L58B-SEQ)
Get their attention with our Sequencing 60 LED 3rd Brake Light. It’s split 10-10-20-10-10 and sequences inside-out once when the brakes are first applied then stays on solid. Flush mounting, build-in lens is 1/2″ wide X 15-1/4″ long.
SKU: L58B-SEQ -
Hot Rod Exterior Lighting, Hot Rod LED Brake Lights
One-Piece Flush Mount Hot Slot LED Taillight Kit (L68)
Hot Rod Exterior Lighting, Hot Rod LED Brake LightsOne-Piece Flush Mount Hot Slot LED Taillight Kit (L68)
THIS PRODUCT IS DISCONTINUED> We’ve put 120 super bright red LED’s into a single, one-piece taillight kit – single slot red lens measures 30-3/4″ long X 1/2″ wide to provide an uninterrupted, smooth look. Diffuser attached. Will work in surfaces with gradual curvature up to about 2-1/2″. The LED’s are dual intensity for taillights and brake/turn signals and are premounted into an aluminum housing. We also provide an aluminum “spacer box” to fill the gap created by body curvature and to seal out dirt and water – simply cut to the contour of the body. Weld-in or glass-in studs for mounting are included. Note that this is a build-in kit requiring extensive paint and body working skills.
SKU: L68
