trim
Showing all 20 results
-
Custom Door Hardware, Windows Cranks & Switch Knobs
Oval Door Handle Pulls with Radius Bezel TQ-ODP
These machined billet aluminum door pulls from Trique Manufacturing are offered with a radius bezel or a 30 degree angled bezel to match our other interior components. This one featured has a radius bezel.
- Machined from 6061 Aluminum
- Comes with mounting brackets
- Made in the USA
Dimensions:
- Footprint = 4.5″ X 1.25″
- Bezel = 5″ X 1.5″
- Pocket Depth = .55″
SKU: TQ-ODP -
Custom Door Hardware, Windows Cranks & Switch Knobs, Custom Hot Rod Switch Panels
Column Dress-up Knobs (L44)
Custom Door Hardware, Windows Cranks & Switch Knobs, Custom Hot Rod Switch PanelsColumn Dress-up Knobs (L44)
And to finish the job, get our Column Dress-up Knobs for the Column Shifter Arm and Hazards. Column Shifter Knob is polished aluminum with stainless steel set screw. Hazard Knob is polished aluminum with 6-32 threaded stud.
SKU: L44 -
Custom Door Hardware, Windows Cranks & Switch Knobs, Custom Hot Rod Shift Knobs
Contemporary Column Dress-up Knobs (L44G)
Custom Door Hardware, Windows Cranks & Switch Knobs, Custom Hot Rod Shift KnobsContemporary Column Dress-up Knobs (L44G)
And to finish the job, get our Column Dress-up Knobs for the Column Shifter and Hazards. Both are polished aluminum with stainless steel set screw and Black O-rings as shown.
SKU: L44G -
-
-
-
Custom Switches for Hot Rods
Column Turn Lever Switch (L43)
Polished Aluminum Knob and Stainless Steel Arm with Chrome Switch Bezel and Black Button. Fits GM & other columns with single screw through flat end. S/S screw included.
This beautiful Turn Signal Lever also contains a REAL ON/OFF switch. Sold with or without a 40 amp relay.
SKU: L43 -
-
Custom Switches for Hot Rods
Contemporary Turn Lever Switch (L43G)
Polished Aluminum Knob with Black O-Ring and Stainless Steel Arm with Chrome Switch Bezel and Black Button. Fits GM & other columns with single srew through flat ends. S/S screw included. (Will not replace units that originally had wiper or cruise controls.)
This beautiful Turn Signal Lever also contains a REAL ON/OFF switch. Sold with or without a 40 amp relay. And for HI/LO Beam dimming, our Turn Lever unit comes with a quality, 40 amp automotive grade SPDT relay. Works for any ON/ON switching.
SKU: L43G -
Custom Door Hardware, Windows Cranks & Switch Knobs
Billet Switch Nut with O-Ring for Headlight Switch (B-HLSN)
Custom Door Hardware, Windows Cranks & Switch KnobsBillet Switch Nut with O-Ring for Headlight Switch (B-HLSN)
Have that headlight switch match with our ignition switch by adding a Billet Headlight Switch Nut with O-Ring. Perfect for part #AA-HLS. Has 7/16 – 28 thread and .203 Dia center hole.
SKU: B-HLSN -
Custom Automotive Interior Trim Accessories
Oval Hole/Oval Body Brake & Clutch Trim (B02OVS)
Great new Oval shaped body. For elongated or rectangular pedal shafts Also trim the firewall for accelerator cable and kick down or for some TPI applications. 1-5/8″ X 2-1/4″ wide. 5/8″ x 1-1/8″ hole. Stainless steel screws, Rubber gasket, Split ‘n’ Pinned trim. (Oval Split ‘n’ Pinned) For a solid Oval trim, see our #B14OV-PLT
SKU: B02OVS -
Custom Automotive Interior Trim Accessories
Power Port with Billet Plug #B23
Accepts any 10-32 threaded knob to match your interior. Photos with knobs are shown for example only. Knobs are priced separately. With all of the modern electronic devices that you need to charge, what’s missing from the average street rod??? A Power Port, of course! And StreetWorks gives you one that is not only attractive but also can be made to match the rest of your interior. Our Power Port with Billet Plug features an easily installed Power Port (fits into a 7/8″ diameter hole), wiring terminals, an attractive, machined Billet Plug with O-ring retainer, a spare o-ring and a 10-32 threaded stud for attaching the decorative knob of your choice (sold separately).
SKU: B23 -
Custom Automotive Interior Trim Accessories
Round Brake & Clutch Trim (B01)
Small, round hole trim allows you to finish the brake and clutch pedal shafts and around the dimmer switch. Also great for around wires, hoses, harnesses or anything you want to trim. Choose from a solid machined part or our Split ‘n’ Pinned trim. Both are 2-1/4″ diameter with a 15/16″ diameter hole and stainless steel screws and rubber gasket (not in photo).
SKU: B01 -
Releases
Interior Neat Nob Interior Door Release Switches
Your interior never had it so good. Clean and Elegant design to match the look of billet power window switch plates or to add stand-alone beauty to your doors. And the best part is still how great they work. 1-3/4″ square trim plates. Smooth, Turned or Ball Nobs. Stainless Screws.
SKU: B14Q -
Hot Rod Interior Column Trim
Steering Column Trim / Lightning Roll Cage Pass Through (B03N)
Give your steering column the finished look with our machined aluminum trim with heavy duty rubber seal. Made with StreetWorks unique Split ‘n’ Pinned design for easy installation – no column removal required. The ring measures 3.420″ I.D. and 4.800″ O.D. and includes stainless steel mounting screws. The rubber seal has an opening to fit GM and other columns measuring 1-3/4″ to approximately 2-1/8″ diameter. Some trimming may be required for larger diameters. Now with an additional grommet to fit 1-1/2″ diameter columns.
These trim rings also double as a pretty sweet finishing piece for your Ford Lightning roll cage pass through. Of course these will work for virtually any other roll cage pass through you can think of but they are commonly used in the Lightning application.
SKU: B03N -
Custom Door Hardware, Windows Cranks & Switch Knobs
Brake Pedal Hole Trim Plate (ET-6510)
From our friends at Sachse Rod Shop. Each piece is 2″ X 4″ with a 1/2″ wide slot. Overlapping feature allows the slot to be 1-1/4″ to 2″ long. 18 gauge steel. Predrilled holes and stainless screws. Helps make installation very simple. (2 plate pieces and 4 screws)
SKU: SA-6510
