3 1/8″ Illuminated Drop in Disc for Cup Holders (Pair) (IL-32#)
Here is the same illumination offered in all of our drop in cupholders. We have decided to sell these as an add on for your existing cup holders, All you have to do is drill a 1/4″ hole in the bottom of your existing cup holder and pass the wires through. It’s a simple 2 wire installation consisting of power and ground. You can switch it on with your headlights or an aux. switch.
NOTE: Cup Holders Sold Separately
These drop in discs fit our black medium 43032 and natural aluminum IT-MAC cup holders.
$49.00
Here is the same illumination offered in all of our drop in cupholders. We have decided to sell these as an add on for your existing cup holders, All you have to do is drill a 1/4″ hole in the bottom of your existing cup holder and pass the wires through. It’s a simple 2 wire installation consisting of power and ground. You can switch it on with your headlights or an aux. switch.
NOTE: Cup Holders Sold Separately
These drop in discs fit our black medium 43032 and natural aluminum IT-MAC cup holders.
https://www.streetmusclemag.com/news/more-led-innovation-from-watsons-streetworks/
| Weight | 0.00000000 lbs |
|---|---|
| Dimensions | 0.00000000 × 0.00000000 × 0.00000000 cm |
| Disc Color | Amber, Blue, White, Red, Green |
You may also like…
-
Hot Rod & Automotive Interior Display Trim
Dual Port USB charger / Volt Meter with Polished Aluminum Face (IT-USBP)
Hot Rod & Automotive Interior Display TrimDual Port USB charger / Volt Meter with Polished Aluminum Face (IT-USBP)
This is our beautiful brushed Billet USB Charger and Volt Meter with a polished aluminum face. It will charge 2 phones or other devices while you’re on the road. It measures 1 ¾” dia. face, 2 ½” deep, and fits in a 1 ½” hole. This handy unit also checks the vehicle’s voltage.
The LED Display shows the power/charging status of the device(s) plugged into it. Both ports are high output ports. Capable of pushing 2.4 amps per port and has the typical USB charger of 5.0 volts.
Product comes with wires, mounting bracket and screws and, instructions.
SKU: IT-USBP -
Hot Rod Ignition Security Systems
RFID Ignition Security Unit
This all new StreetWorks RFID is designed to work with your Hot Dot Ignition Systems or your existing key. This is the security system that your hot rod has been missing.
As you may already know the “HOT DOT” ignition takes the place of your conventional “keyed” ignition switch however it has no security built in. This all new RFID Security system gives you the security and convenience that today’s society demands.
What is RFID?
RFID stands for Radio-Frequency Identification. The acronym refers to small electronic devices that consist of a small chip and an antenna. The RFID device serves the same purpose as magnetic strip on the back of a credit card; it provides a unique identifier for that object. And, just as a magnetic strip must be scanned to get the information, the RFID device must be scanned to retrieve the identifying information.
The RFID unit has 3 different operating modes.
Mode 1: High security mode. The car only starts and stays running with the RFID fob in range.
Mode 2: Medium security mode. The RFID fob must be in range for car to start and will stay running until the operator turns it off, then it won’t restart.
Mode 3: NO security mode. Should your fob become lost or damaged you can over-ride the system by entering a code with the hidden button switch.
The RFID is capable of working between 5 and 200 feet with the vehicle’s windows closed. If the vehicle’s windows are open we do not have a measurement for how far away the unit will work. There are 8 increments of sensitivity that the unit can be programmed to.
SKU: WI-RFID
Related products
-
Car Interior LED Lights
Switched Dome Light (L82)
A modern car feature for your favorite ride NOW IN LED. This attractive dome light has a switch built right into the lens. Convenient size is just 4-1/2″ X 2-1/2″, snaps into place – a hole template is provided. Bulbs and 24″ pre-wired leads included. Tan colored plastic housing fits into most interior motifs. In this photo, the switch is at the right hand end of the lens.
SKU: L82 -
Car Interior LED Lights
LED Interior Light with Switch (L85)
A sweet little LED Interior Light. The lens measures just 7/8″ x 3″ and when you rotate the lens either way, the light turns on. It can also be externally switched. Install with the oval mounting flange showing (it’s 2-1/16″ x 5″) or hide it behind the mounting surface with just the lens showing. Needs about 1-1/4″ rear clearance. Screws included. Comes with a chrome bezel that covers the black plastic shown in the picture.
SKU: L85 -
Hot Rod Cup Holders
Illuminated Medium Natural Aluminum Cup Holders (IT-MAC#)
We have added the option for accent lighting on all of our cup holders. Here are our medium natural aluminum cup holders that measure 3 1/4″ ID by 3″ deep with a 4” flange. These are available in your choice of Amber, Blue, Green, Red or White.
SKU: IT-MAC# -
Car Interior LED Lights
White or Blue Low Profile Illuminator LED
Use these 3/8″ square, surface mount LEDs for interior accent lighting, license plate lights (2 minimum recommended), glove box, ash tray and a hundred other uses. These low profile lights can be put just about anywhere you want with the double sided adhesive we include. Available in blue or white. 100% Weatherproof.
SKU: L91
