Great looking, small Chrome Push Button Switches either round or square. 6 amp max load. Easy mounting in a 13/16″ hole. With wire leads.
|Dimensions||0.00000000 × 0.00000000 × 0.00000000 cm|
ON-OFF Square, ON-OFF Round, Mom ON-OFF – Square, Mom ON-OFF – Round
View or Download the Product InstructionsL10R-P.pdf
You may also like…
RFID Ignition Security Fob (WI-RFID)0 out of 5(0)
This all new StreetWorks RFID is designed to work with your Hot Dot Ignition Systems or your existing key. This is the security system that your hot rod has been missing.
As you may already know the “HOT DOT” ignition takes the place of your conventional “keyed” ignition switch however it has no security built in. This all new RFID Security system gives you the security and convenience that today’s society demands.
What is RFID?
RFID stands for Radio-Frequency Identification. The acronym refers to small electronic devices that consist of a small chip and an antenna. The RFID device serves the same purpose as magnetic strip on the back of a credit card; it provides a unique identifier for that object. And, just as a magnetic strip must be scanned to get the information, the RFID device must be scanned to retrieve the identifying information.
The RFID unit has 3 different operating modes.
Mode 1: High security mode. The car only starts and stays running with the RFID fob in range.
Mode 2: Medium security mode. The RFID fob must be in range for car to start and will stay running until the operator turns it off, then it won’t restart.
Mode 3: NO security mode. Should your fob become lost or damaged you can over-ride the system by entering a code with the hidden button switch.
The RFID is capable of working between 5 and 200 feet with the vehicle’s windows closed. If the vehicle’s windows are open we do not have a measurement for how far away the unit will work. There are 8 increments of sensitivity that the unit can be programmed to.SKU: WI-RFID
Hot Rod Ignition Switch Systems
Hot Dot All-in-One Ignition/Start/Stop With Switch (12***)0 out of 5(0)
Push our Ignition Switch button once and your accessory circuit comes on. A second push and hold engages the starter. When your engine starts just release the switch and your running as well as the LED indicator ring. Press it once more and everything turns off. This gorgeous Stainless steel (22MM) switch mounts in a 7/8″ diameter hole with the overall size of 1′. The compact ignition module can hide under your dash or in the engine bay.
This kit will work with our smaller (16MM) momentary push button but be warned guys; you’ll be using your pinky.
Compare our price to any other Single Switch Ignition System anywhere! We were the first to bring this system to the street rod market and we know how to do it best!
Check out our full line of matching low profile, push button switches and indicator lights.
Note this unit requires securing your car. Check out our battery disconnects or simply install a hidden kill switch or, look at our RFID unit.SKU: 12***
Hot Rod Power Window Switches
4 Door 2 Over 2 3 Wire Switch Kit (L39B2/2-4D)0 out of 5(0)
Beautiful billet 3 wire power window switches now in kits for 4-door cars. Comes with dimpled rockers. You get a 2 over 2 switch panel for the driver’s door and 3 single switch panels for each of the other doors. The billet panels and rockers have a brushed aluminum finish.
Kit includes: switches with panels, polarity reversing modules, wiring connectors, and instructions.
Don’t know if you have Polarity reversing Motors? See the Product Instructions Tab to determine if your motors are Polarity reversing or Non-Polarity reversing.SKU: L39B2/2-4D
Hot Rod Interior Light Switches
Large Chrome Low Profile LED Indicators (241xx)0 out of 5(0)
These beautiful Low profile LED indicator light add a great look to your dash without being big and bulky. They go great with our “Hot Dot” push button switches. They are avalible in two sizes, The large one is 5/8″ and mounts in a 15/32 diameter hole. Purchase large indicators shown on the left in the picture on this page.
Small one is 7/16′ and mounts in a 5/16′ diameter hole. Easy 2 wire connections will make this indicator light a great addition to you project. To purchase the Small low profile indicator, type “Small Chrome Indicator” in the search bar.SKU: 241xx
Hot Rod Power Window Switches
Power Window / Door Lock Switch Kit with Dimpled Rockers (L39BTDL)0 out of 5(0)
This kit gives you a rectangle 3 switch panel for the drivers door to control both front windows and door locks. You will also receive a 2 switch panel for the passenger door to control the passenger window and door locks. This kit includes the necessary crossover wiring, switch pigtails, connectors and instructions.SKU: L39BTDL