Console Plate Power Window Switch Kit (L39BC)
Now with either Dimpled or Paddle Rockers
Our Billet 3-wire rocker switches inside an attractive Billet Console Plate that’s 2-1/4″ wide by 2-1/2″ high with brushed finish. Add distinct styling in Billet to your custom console 2 switches, Console Plate, 2 polarity reversing modules, wire leads, connectors and instructions.
Kit includes: (1)Console switch frame with switches, (2) polarity reversing modules, wire leads and instructions.
Available with either a dimpled or paddle style rocker. Switch and frame have a brushed aluminum finish.
Don’t know if you have Polarity reversing Motors? See the Product Instructions Tab to determine if your motors are Polarity reversing or Non-Polarity reversing.
$175.00 – $185.00
-
Hot Rod Power Window Switches
Console Plate Power Window Switch Kit (L39BC)
Now with either Dimpled or Paddle Rockers
Our Billet 3-wire rocker switches inside an attractive Billet Console Plate that’s 2-1/4″ wide by 2-1/2″ high with brushed finish. Add distinct styling in Billet to your custom console 2 switches, Console Plate, 2 polarity reversing modules, wire leads, connectors and instructions.
Kit includes: (1)Console switch frame with switches, (2) polarity reversing modules, wire leads and instructions.
Available with either a dimpled or paddle style rocker. Switch and frame have a brushed aluminum finish.
Don’t know if you have Polarity reversing Motors? See the Product Instructions Tab to determine if your motors are Polarity reversing or Non-Polarity reversing.
SKU: L39-BC -
Hot Rod Power Window Switches
Express Power Window Module (PW-EXP)
Now you can enjoy the convenience of “one touch” windows on your vehicle. This compact unit mounts inside your door and works with all polarity reversing motors. Simply tap your switch once and the window travels all the way up or down. While in motion just give the switch another tap to stop mid-way. This works with your remote too! Each express module comes with connectors, heavy duty mounting tape and instructions. Each 3″ by 2″ by 1″ module operates one window.
SKU: PW-EXP
Now with either Dimpled or Paddle Rockers
Our Billet 3-wire rocker switches inside an attractive Billet Console Plate that’s 2-1/4″ wide by 2-1/2″ high with brushed finish. Add distinct styling in Billet to your custom console 2 switches, Console Plate, 2 polarity reversing modules, wire leads, connectors and instructions.
Kit includes: (1)Console switch frame with switches, (2) polarity reversing modules, wire leads and instructions.
Available with either a dimpled or paddle style rocker. Switch and frame have a brushed aluminum finish.
Don’t know if you have Polarity reversing Motors? See the Product Instructions Tab to determine if your motors are Polarity reversing or Non-Polarity reversing.
| Weight | 0.00000000 lbs |
|---|---|
| Dimensions | 0.00000000 × 0.00000000 × 0.00000000 cm |
| Rocker Type | Dimpled Rockers, Paddle Rockers |
| Finish | Brushed Finish, Raven Black Finish |
Product Instructions
View or Download the Product Instructions
L39BCD.pdf What-is-a-Polarity-Reversing-Motor.pdfYou may also like…
-
Hot Rod Ignition Switch Systems
Hot Rod Push Button Starter Switch Kit
Push our Ignition Switch button once and your accessory circuit comes on. A second push and hold engages the starter. When your engine starts just release the switch and your running as well as the LED indicator ring. Press it once more and everything turns off. This gorgeous Stainless steel (22MM) switch mounts in a 7/8″ diameter hole with the overall size of 1′. The compact ignition module can hide under your dash or in the engine bay.
This kit will work with our smaller (16MM) momentary push button but be warned guys; you’ll be using your pinky.
Compare our price to any other Single Switch Ignition System anywhere! We were the first to bring this system to the street rod market and we know how to do it best!
Check out our full line of matching low profile, push button switches and indicator lights.
Note this unit requires securing your car. Check out our battery disconnects or simply install a hidden kill switch or, look at our RFID unit.
SKU: 12*** -
Hot Rod Power Window Switches
Express Power Window Module (PW-EXP)
Now you can enjoy the convenience of “one touch” windows on your vehicle. This compact unit mounts inside your door and works with all polarity reversing motors. Simply tap your switch once and the window travels all the way up or down. While in motion just give the switch another tap to stop mid-way. This works with your remote too! Each express module comes with connectors, heavy duty mounting tape and instructions. Each 3″ by 2″ by 1″ module operates one window.
SKU: PW-EXP -
Wire Routing for Hot Rods
Stainless Steel Braided Door Wire Looms for Suicide Doors (TP-SUICIDE)
These wire looms can open to more than 200 degrees and not bind! Swivel ball bushings assure smooth operation. 1 1/2″ O.D. X 3/8″ I.D. X 7+” length, plastic lined S/S Braid. New Quick Collar ends. Ball swivel flange end mounts vertically and is just 2″ high.
SKU: TP-SUICIDE -
Hot Rod Ignition Security Systems
RFID Ignition Security Unit
This all new StreetWorks RFID is designed to work with your Hot Dot Ignition Systems or your existing key. This is the security system that your hot rod has been missing.
As you may already know the “HOT DOT” ignition takes the place of your conventional “keyed” ignition switch however it has no security built in. This all new RFID Security system gives you the security and convenience that today’s society demands.
What is RFID?
RFID stands for Radio-Frequency Identification. The acronym refers to small electronic devices that consist of a small chip and an antenna. The RFID device serves the same purpose as magnetic strip on the back of a credit card; it provides a unique identifier for that object. And, just as a magnetic strip must be scanned to get the information, the RFID device must be scanned to retrieve the identifying information.
The RFID unit has 3 different operating modes.
Mode 1: High security mode. The car only starts and stays running with the RFID fob in range.
Mode 2: Medium security mode. The RFID fob must be in range for car to start and will stay running until the operator turns it off, then it won’t restart.
Mode 3: NO security mode. Should your fob become lost or damaged you can over-ride the system by entering a code with the hidden button switch.
The RFID is capable of working between 5 and 200 feet with the vehicle’s windows closed. If the vehicle’s windows are open we do not have a measurement for how far away the unit will work. There are 8 increments of sensitivity that the unit can be programmed to.
SKU: WI-RFID
Related products
-
Custom Hot Rod Switch Panels, Hot Rod Power Window Switches
4-Door Hot Rod Paddle Rocker Power Window Switch Kit
Custom Hot Rod Switch Panels, Hot Rod Power Window Switches4-Door Hot Rod Paddle Rocker Power Window Switch Kit
Beautiful billet 3 wire power window switches now in kits for 4-door cars. Comes with paddle rockers.
Kit includes: 4 switch panel for the driver’s door and 3 single switch panels for each of the other doors. Includes polarity reversing modules, wiring connectors switches and panels with instructions.
Don’t know if you have Polarity reversing Motors? See the Product Instructions Tab to determine if your motors are Polarity reversing or Non-Polarity reversing.
SKU: L39BO4DRP -
Hot Rod Power Window Switches
4 Door 2 Over 2 3 Wire Switch Kit (L39B2/2-4D)
Beautiful billet 3 wire power window switches now in kits for 4-door cars. Comes with dimpled rockers. You get a 2 over 2 switch panel for the driver’s door and 3 single switch panels for each of the other doors. The billet panels and rockers have a brushed aluminum finish.
Kit includes: switches with panels, polarity reversing modules, wiring connectors, and instructions.
Don’t know if you have Polarity reversing Motors? See the Product Instructions Tab to determine if your motors are Polarity reversing or Non-Polarity reversing.
SKU: L39B2/2-4D -
Hot Rod Power Window Switches
Oval Power Window / Door Lock Switch Kit with paddle rockers (L39BOTDLP)
Hot Rod Power Window SwitchesOval Power Window / Door Lock Switch Kit with paddle rockers (L39BOTDLP)
This kit gives you an oval 3 switch panel with paddle rockers for the drivers door to control both front window and door locks. You will also receive a 2 switch panel for the passenger door that controls the passenger window and door locks. This kit includes the necessary crossover wiring, switch pigtails, connectors and instructions.
SKU: L39BOTDLP -
Custom Hot Rod Switch Panels, Hot Rod Power Window Switches
Rectangular Paddle Power Window Switch Kit for 3 Regulators (L39B3XP)
Custom Hot Rod Switch Panels, Hot Rod Power Window SwitchesRectangular Paddle Power Window Switch Kit for 3 Regulators (L39B3XP)
3 Switch Panel
A single location (console) 3 switch control panel that measures 2 – 3/4″ wide by 1 – 5/8″ high.
Includes 60″ of lead wires, connectors and instructions. The switch frame mounts with (4) blind studs from behind.
Switches are rated at 5 amps max. Please use relays if you’re 5 amps or more. Polarity reversing modules are required for 2 wire non grounded window kits.
Don’t know if you have Polarity reversing Motors? See the Product Instructions Tab to determine if your motors are Polarity reversing or Non-Polarity reversing.
SKU: L39B3XP
