4-1/4″ Flush Mount Amber Front Lights or Red Marker Lights L89
The amber light has 12 super bright amber LED’s. The red light has 15 super bright red LED’s Both lights have clear lenses (4-1/4” long, 1/2” wide, 1/4” deep for sanding) with diffuser, dual intensity convertor, installation hardware and instructions.
$129.00
The amber light has 12 super bright amber LED’s. The red light has 15 super bright red LED’s Both lights have clear lenses (4-1/4” long, 1/2” wide, 1/4” deep for sanding) with diffuser, dual intensity convertor, installation hardware and instructions.
| Weight | 0.00000000 lbs |
|---|---|
| Dimensions | 0.00000000 × 0.00000000 × 0.00000000 cm |
| Color | Red Pair, Amber Pair |
You may also like…
-
Hot Rod Ignition Switch Systems
Hot Rod Push Button Starter Switch Kit
Push our Ignition Switch button once and your accessory circuit comes on. A second push and hold engages the starter. When your engine starts just release the switch and your running as well as the LED indicator ring. Press it once more and everything turns off. This gorgeous Stainless steel (22MM) switch mounts in a 7/8″ diameter hole with the overall size of 1′. The compact ignition module can hide under your dash or in the engine bay.
This kit will work with our smaller (16MM) momentary push button but be warned guys; you’ll be using your pinky.
Compare our price to any other Single Switch Ignition System anywhere! We were the first to bring this system to the street rod market and we know how to do it best!
Check out our full line of matching low profile, push button switches and indicator lights.
Note this unit requires securing your car. Check out our battery disconnects or simply install a hidden kill switch or, look at our RFID unit.
SKU: 12*** -
Hot Rod Ignition Security Systems
RFID Ignition Security Unit
This all new StreetWorks RFID is designed to work with your Hot Dot Ignition Systems or your existing key. This is the security system that your hot rod has been missing.
As you may already know the “HOT DOT” ignition takes the place of your conventional “keyed” ignition switch however it has no security built in. This all new RFID Security system gives you the security and convenience that today’s society demands.
What is RFID?
RFID stands for Radio-Frequency Identification. The acronym refers to small electronic devices that consist of a small chip and an antenna. The RFID device serves the same purpose as magnetic strip on the back of a credit card; it provides a unique identifier for that object. And, just as a magnetic strip must be scanned to get the information, the RFID device must be scanned to retrieve the identifying information.
The RFID unit has 3 different operating modes.
Mode 1: High security mode. The car only starts and stays running with the RFID fob in range.
Mode 2: Medium security mode. The RFID fob must be in range for car to start and will stay running until the operator turns it off, then it won’t restart.
Mode 3: NO security mode. Should your fob become lost or damaged you can over-ride the system by entering a code with the hidden button switch.
The RFID is capable of working between 5 and 200 feet with the vehicle’s windows closed. If the vehicle’s windows are open we do not have a measurement for how far away the unit will work. There are 8 increments of sensitivity that the unit can be programmed to.
SKU: WI-RFID
Related products
-
Hot Rod Exterior Lighting
Brakelighter 12 Volt 3rd Brake Light (65515)
Now you can feel safe knowing the cars behind you will see your brake lights. This slick little unit attaches to the inside of your rear window. For easy removal when you’re at a judged show attach the light with the included suction cups. For a more permanent installation double sided tape is also included. The light is divided into 3 sections, letting you use it for turn signals as well as brake lights. Works with either positive or negative ground vehicles. Instructions included. This light is 12 “ long , 5/8” tall & 7/8” deep.
SKU: 65515 -
Custom Marker Lights, Hot Rod Exterior Lighting
6-LED Interior and Marker Lights, L96 Series
Great little 6-LED lights have a variety of uses. They are 1-13/16” diameter overall and mount in a 1-3/8” diameter hole. Red and ambers are SAE/DOT rated as clearance lights. Provided with an optional stainless steel trim ring.
SKU: L96 -
Aftermarket Backup Lights for Hot Rods, Courtesy Lights, Hot Rod Exterior Lighting
Cobra Light Upgrade Package (EL-CLP)
Aftermarket Backup Lights for Hot Rods, Courtesy Lights, Hot Rod Exterior LightingCobra Light Upgrade Package (EL-CLP)
For all you Cobra owners out there this is a light upgrade package that will add to the safety of your car.
EL-CLP Basic Cobra Light Package Upgrade Kit
What You Get:
25101: 1 pair LED Headlights with 7″ round lenses
25012: 2 pair Red 1157 LED replacements for brake lights.
25024: 1 pair Amber 1157 LED replacements for turn signals.
L96WCL: 1 pair White LED backup lights.
EL-MB: 1 Micro Billet LED Third Brake Light.
AM-02R: 1 Pair of electronic LED flashers.
Total retail price if you purchased everything separately: $553.00
Your price when you buy the light upgrade package: $419.00
That’s a total savings of $134.00
EL-CLPD Deluxe Cobra Light Upgrade Kit
What You Get:
25101: 1 pair LED Headlights with 7″ round lenses
25012: 2 pair Red 1157 LED replacements for brake lights.
25024: 1 pair Amber 1157 LED replacements for turn signals.
L63BW: 1 pair White flush mount LED backup lights.
EL-MB: 1 Micro Billet LED Third Brake Light.
AM-02R: 1 Pair of electronic LED flashers.
L03: Trunk light kit with tilt switch and 1 2″ LED strip light.
L04G: Interior courtesy light kit with 2 jamb switches and 2 2″ LED strip lights.
EL-03E: Engine bay light kit includes 1 tilt switch and 3 8″ LED strip lights.
EL-DR: 12″ daytime running light with bracket.
Total retail price if you purchased everything separately: $822.00
Your price when you buy the light upgrade package: $569.00
That’s a total savings of $253.00
SKU: EL-CLP -
