Illuminated Medium Natural Aluminum Cup Holders (IT-MAC#)
We have added the option for accent lighting on all of our cup holders. Here are our medium natural aluminum cup holders that measure 3 1/4″ ID by 3″ deep with a 4” flange. These are available in your choice of Amber, Blue, Green, Red or White.
$65.00
We have added the option for accent lighting on all of our cup holders. Here are our medium natural aluminum cup holders that measure 3 1/4″ ID by 3″ deep with a 4” flange. These are available in your choice of Amber, Blue, Green, Red or White.
https://www.streetmusclemag.com/news/more-led-innovation-from-watsons-streetworks/
https://www.fuelcurve.com/led-illuminated-cup-holders-and-inserts/
| Weight | 0.00000000 lbs |
|---|---|
| Dimensions | 0.00000000 × 0.00000000 × 0.00000000 cm |
| Color | Green Pair, Blue Pair, White Pair, Red Pair, Amber Pair |
You may also like…
-
Hot Rod Ignition Security Systems
RFID Ignition Security Unit
This all new StreetWorks RFID is designed to work with your Hot Dot Ignition Systems or your existing key. This is the security system that your hot rod has been missing.
As you may already know the “HOT DOT” ignition takes the place of your conventional “keyed” ignition switch however it has no security built in. This all new RFID Security system gives you the security and convenience that today’s society demands.
What is RFID?
RFID stands for Radio-Frequency Identification. The acronym refers to small electronic devices that consist of a small chip and an antenna. The RFID device serves the same purpose as magnetic strip on the back of a credit card; it provides a unique identifier for that object. And, just as a magnetic strip must be scanned to get the information, the RFID device must be scanned to retrieve the identifying information.
The RFID unit has 3 different operating modes.
Mode 1: High security mode. The car only starts and stays running with the RFID fob in range.
Mode 2: Medium security mode. The RFID fob must be in range for car to start and will stay running until the operator turns it off, then it won’t restart.
Mode 3: NO security mode. Should your fob become lost or damaged you can over-ride the system by entering a code with the hidden button switch.
The RFID is capable of working between 5 and 200 feet with the vehicle’s windows closed. If the vehicle’s windows are open we do not have a measurement for how far away the unit will work. There are 8 increments of sensitivity that the unit can be programmed to.
SKU: WI-RFID -
Hot Rod Ignition Switch Systems
Hot Rod Push Button Starter Switch Kit
Push our Ignition Switch button once and your accessory circuit comes on. A second push and hold engages the starter. When your engine starts just release the switch and your running as well as the LED indicator ring. Press it once more and everything turns off. This gorgeous Stainless steel (22MM) switch mounts in a 7/8″ diameter hole with the overall size of 1′. The compact ignition module can hide under your dash or in the engine bay.
This kit will work with our smaller (16MM) momentary push button but be warned guys; you’ll be using your pinky.
Compare our price to any other Single Switch Ignition System anywhere! We were the first to bring this system to the street rod market and we know how to do it best!
Check out our full line of matching low profile, push button switches and indicator lights.
Note this unit requires securing your car. Check out our battery disconnects or simply install a hidden kill switch or, look at our RFID unit.
SKU: 12***
Related products
-
Wire Routing for Hot Rods
Medium Plastic Wire Looms (P-MWL)
These plastic wire looms for door jams are 5/8″ O.D. x 3/8″ ID. x 7+” long. Fixed grommet at one end for the door jam. Sliding grommet for the other end goes into the door. More than twice the wire capacity as 1/4″ I.D. tubing. Requires 3/4″ and 7/8″ Diameter holes. Hot rod black.
SKU: P-MWL (2 door pair) -
Hot Rod Cup Holders
Medium Natural Aluminum Cup Holders (pair) (IT-MAC)
With large and small cup holders in Stainless Steel we thought some of you might prefer medium as well. These aluminum units are 3.25 dia. by 3″ deep with a 4” flange. These are finished with a cork base and are sold in pairs.
SKU: IT-MAC -
Hot Rod Cup Holders
Swing Out Cupholder Extension (IT-53E)
Does our swing out cupholder not come out far enough from your dash? Here’s the solution a nice Brushed Aluminum Extension that will get that cupholder out far enough for you to rest your drink in. This extension is adjustable with 3 different lengths for your adjustment.
SKU: IT-53E -
Hot Rod Cup Holders
Swing Out Cup holder (#43053)
Add a useable hidden cupholder to your hot rod for those thirsty cruise days. The cupholder has the perfect size opening to harness the largest of quickie mart drinks yet still handles your typical water bottle just fine. This billet aluminum swing out design swivels under the dash or even your seat for that tidy hidden look. The cupholder has a moveable latching under support so it is very compact when put away. Stop limiting yourself on what you drink in your car because it doesn’t have a locking lid and add a cupholder today.
SKU: 43053
