MagTech Magnet Entry System (L20)
The magnet is the “key” to this trick system. Just place the magnet close to the hidden switch and it will send power to your actuator, solenoid or any momentary switched mechanism. Complete with “keys”, switches, clips, 40-amp relays and a waterproof back-up button in case you misplace the keys.
Please Note: StreetWorks unique wiring plan assures that wires inside the doors are only “hot” when activated, providing added security from short circuits. Also, magnetic fields do not work through steel but the hidden switch can be put under the lip of a fender or running board, behind glass, plastic, fiberglass, aluminum, non-magnetic stainless trim, filler or any non-magnetic material. If you can’t figure out where to put the switch on your steel car, give us a call and we’ll help.
$54.00 – $99.00
The magnet is the “key” to this trick system. Just place the magnet close to the hidden switch and it will send power to your actuator, solenoid or any momentary switched mechanism. Complete with “keys”, switches, clips, 40-amp relays and a waterproof back-up button in case you misplace the keys.
Please Note: StreetWorks unique wiring plan assures that wires inside the doors are only “hot” when activated, providing added security from short circuits. Also, magnetic fields do not work through steel but the hidden switch can be put under the lip of a fender or running board, behind glass, plastic, fiberglass, aluminum, non-magnetic stainless trim, filler or any non-magnetic material. If you can’t figure out where to put the switch on your steel car, give us a call and we’ll help.
| Weight | 0.00000000 lbs |
|---|---|
| Dimensions | 0.00000000 × 0.00000000 × 0.00000000 cm |
| Door Set Up | 2 Door, 1-Door |
You may also like…
-
Hot Rod Ignition Switch Systems
Hot Rod Push Button Starter Switch Kit
Push our Ignition Switch button once and your accessory circuit comes on. A second push and hold engages the starter. When your engine starts just release the switch and your running as well as the LED indicator ring. Press it once more and everything turns off. This gorgeous Stainless steel (22MM) switch mounts in a 7/8″ diameter hole with the overall size of 1′. The compact ignition module can hide under your dash or in the engine bay.
This kit will work with our smaller (16MM) momentary push button but be warned guys; you’ll be using your pinky.
Compare our price to any other Single Switch Ignition System anywhere! We were the first to bring this system to the street rod market and we know how to do it best!
Check out our full line of matching low profile, push button switches and indicator lights.
Note this unit requires securing your car. Check out our battery disconnects or simply install a hidden kill switch or, look at our RFID unit.
SKU: 12*** -
Hot Rod Ignition Security Systems
RFID Ignition Security Unit
This all new StreetWorks RFID is designed to work with your Hot Dot Ignition Systems or your existing key. This is the security system that your hot rod has been missing.
As you may already know the “HOT DOT” ignition takes the place of your conventional “keyed” ignition switch however it has no security built in. This all new RFID Security system gives you the security and convenience that today’s society demands.
What is RFID?
RFID stands for Radio-Frequency Identification. The acronym refers to small electronic devices that consist of a small chip and an antenna. The RFID device serves the same purpose as magnetic strip on the back of a credit card; it provides a unique identifier for that object. And, just as a magnetic strip must be scanned to get the information, the RFID device must be scanned to retrieve the identifying information.
The RFID unit has 3 different operating modes.
Mode 1: High security mode. The car only starts and stays running with the RFID fob in range.
Mode 2: Medium security mode. The RFID fob must be in range for car to start and will stay running until the operator turns it off, then it won’t restart.
Mode 3: NO security mode. Should your fob become lost or damaged you can over-ride the system by entering a code with the hidden button switch.
The RFID is capable of working between 5 and 200 feet with the vehicle’s windows closed. If the vehicle’s windows are open we do not have a measurement for how far away the unit will work. There are 8 increments of sensitivity that the unit can be programmed to.
SKU: WI-RFID
Related products
-
Remotes & Keyless Entry Systems
Hot Dot Remote Ignition Link
A great way to mount our L75 series switches – put an Ignition switch and an Accessory switch side-by-side. The plate is 1″ wide x 2″ long and secures with the switch nuts. L75 switches sold separately. This Ignition Link Relay allows you to enable and disable your StreetWorks Hot Dot Ignition Button using two (2) functions on a Remote Control (such as our Gemini, 2-function or other remote control). Push one remote control button and the Hot Dot Ignition operates, press a second button and disable the Hot Dot. Takes the place of a keylock to secure your car’s ignition. May be triggered by either positive or negative (grounding) momentary trigger signals. Remote Controls and Hot Dot sold separately. Can also be used as a latching On/Off relay, 12 vdc, 5 amps maximum load.
SKU: L88 -
Custom Door Hardware, Windows Cranks & Switch Knobs, Releases, Hot Rod Latches, Hinges and Cable Releases, Automotive Door Latches & Parts, Remotes & Keyless Entry Systems
True Aero Electronic Flush Mount Car Door Handles (ET-TA)
Custom Door Hardware, Windows Cranks & Switch Knobs, Releases, Hot Rod Latches, Hinges and Cable Releases, Automotive Door Latches & Parts, Remotes & Keyless Entry SystemsTrue Aero Electronic Flush Mount Car Door Handles (ET-TA)
RFID stands for Radio-Frequency Identification. The acronym refers to small electronic devices that consist of a small chip and an antenna. The RFID device serves the same purpose as magnetic strip on the back of a credit card; it provides a unique identifier for that object. And, just as a magnetic strip must be scanned to get the information, the RFID device must be scanned to retrieve the identifying information.
The kit includes;
2 weld in door handle pockets
The door handles that unscrew from the pocket for body work. (also the activation switch comes out)
RFID Security Module
2 Relay modules that cutoff the pulse to your solenoid after a half second so your solenoid doesn’t burn out as you are pulling your door open.
Waterproof backup switch that will work even if you lose your RFID Fob.
*Solenoids are sold separately per your latch pulling needs*
SKU: ET-TA -
Remotes & Keyless Entry Systems
StreetWorks Door Solenoids (L22N)
You want more power. You want fast action. StreetWorks Solenoids have it. They work the way you want, with 40 pounds of pull so they work with original latches. Solenoids, cables, pulleys, connectors, wire hardware and instructions. Solenoid and bracket measure approximately 2-3/4″ wide x 2-1/16″ high (thick) x 4-1/4″ long.
If you need more power than these solenoids have, you have a door problem.
SKU: L22N -
Remotes & Keyless Entry Systems
Gemini 2-Function Remote Control (L-GM2Z)
The Gemini remote control gives you two functions in perfect harmony to open either two doors, control power door locks, operate one window up and down, operate two power windows down only, etc. And Now, you don’t need extra relays to do some of these things…they’re built-into the receiver!. That’s a $30 – $40 dollar savings right there! Built-in user programming so that if the unit becomes deprogrammed, you can reprogram it yourself! It includes 30 amp relays built into the receiver so you can power solenoids or actuators with power to spare. 12 gauge power wire leads. Built-in fuse holder with fuses included. Pre-wired for Channel #1 and #2 backup switches (switches not included). Each of the 2 transmitters has 2 buttons to give you “single-button” convenience for each function. Optional ignition disable so that doors can’t be accidentally triggered while the car is running. Butt connectors and great instructions. And it’s from StreetWorks so you know it’s good.
SKU: L-GM2Z
