One-Piece Flush Mount Hot Slot LED Taillight Kit (L68)
Out of stock
THIS PRODUCT IS DISCONTINUED> We’ve put 120 super bright red LED’s into a single, one-piece taillight kit – single slot red lens measures 30-3/4″ long X 1/2″ wide to provide an uninterrupted, smooth look. Diffuser attached. Will work in surfaces with gradual curvature up to about 2-1/2″. The LED’s are dual intensity for taillights and brake/turn signals and are premounted into an aluminum housing. We also provide an aluminum “spacer box” to fill the gap created by body curvature and to seal out dirt and water – simply cut to the contour of the body. Weld-in or glass-in studs for mounting are included. Note that this is a build-in kit requiring extensive paint and body working skills.
$279.00
Out of stock
<<< DISCONTINUED >>>We’ve put 120 super bright red LED’s into a single, one-piece taillight kit – single slot red lens measures 30-3/4″ long X 1/2″ wide to provide an uninterrupted, smooth look. Diffuser attached. Will work in surfaces with gradual curvature up to about 2-1/2″. The LED’s are dual intensity for taillights and brake/turn signals and are premounted into an aluminum housing. We also provide an aluminum “spacer box” to fill the gap created by body curvature and to seal out dirt and water – simply cut to the contour of the body. Weld-in or glass-in studs for mounting are included. Note that this is a build-in kit requiring extensive paint and body working skills.
| Weight | 0.00000000 lbs |
|---|---|
| Dimensions | 0.00000000 × 0.00000000 × 0.00000000 cm |
You may also like…
-
Hot Rod Ignition Security Systems
RFID Ignition Security Unit
This all new StreetWorks RFID is designed to work with your Hot Dot Ignition Systems or your existing key. This is the security system that your hot rod has been missing.
As you may already know the “HOT DOT” ignition takes the place of your conventional “keyed” ignition switch however it has no security built in. This all new RFID Security system gives you the security and convenience that today’s society demands.
What is RFID?
RFID stands for Radio-Frequency Identification. The acronym refers to small electronic devices that consist of a small chip and an antenna. The RFID device serves the same purpose as magnetic strip on the back of a credit card; it provides a unique identifier for that object. And, just as a magnetic strip must be scanned to get the information, the RFID device must be scanned to retrieve the identifying information.
The RFID unit has 3 different operating modes.
Mode 1: High security mode. The car only starts and stays running with the RFID fob in range.
Mode 2: Medium security mode. The RFID fob must be in range for car to start and will stay running until the operator turns it off, then it won’t restart.
Mode 3: NO security mode. Should your fob become lost or damaged you can over-ride the system by entering a code with the hidden button switch.
The RFID is capable of working between 5 and 200 feet with the vehicle’s windows closed. If the vehicle’s windows are open we do not have a measurement for how far away the unit will work. There are 8 increments of sensitivity that the unit can be programmed to.
SKU: WI-RFID -
Hot Rod Ignition Switch Systems
Hot Rod Push Button Starter Switch Kit
Push our Ignition Switch button once and your accessory circuit comes on. A second push and hold engages the starter. When your engine starts just release the switch and your running as well as the LED indicator ring. Press it once more and everything turns off. This gorgeous Stainless steel (22MM) switch mounts in a 7/8″ diameter hole with the overall size of 1′. The compact ignition module can hide under your dash or in the engine bay.
This kit will work with our smaller (16MM) momentary push button but be warned guys; you’ll be using your pinky.
Compare our price to any other Single Switch Ignition System anywhere! We were the first to bring this system to the street rod market and we know how to do it best!
Check out our full line of matching low profile, push button switches and indicator lights.
Note this unit requires securing your car. Check out our battery disconnects or simply install a hidden kill switch or, look at our RFID unit.
SKU: 12***
Related products
-
Hot Rod Exterior Lighting
5 3/4″ Round Replacement Headlight Lens (EL-HL5L)
These are the exact same lenses we use in the Award Winning 5 3/4″” round LED headlight kits. These lenses are DOT approved. They are glass lenses and retain that original look, fit and function. They do not come with bulbs. The lenses accept a standard H4 style bulb.
SKU: EL-HL5L -
Hot Rod LED Brake Lights, Hot Rod Exterior Lighting
Small (7-1/2″) Amber Hot Slot LED Light Kit (L58SM-AMB)
Hot Rod LED Brake Lights, Hot Rod Exterior LightingSmall (7-1/2″) Amber Hot Slot LED Light Kit (L58SM-AMB)
Build-in, flush mount LED Light Kit with amber LED’s and amber lenses. Super bright amber LED’s are premounted inside each aluminum housing. 1/4″ thick amber acrylic lenses with prismatic diffusers. Lights have dual intensity for use as running light and turn signal. Needs only 1″ of clearance space behind the mounting surface. Weld-in or glass-in studs for mounting are included. Lenses are 1/2″ wide X 7-1/2″ long.
SKU: L58SM-AMB -
Custom Marker Lights, Hot Rod Exterior Lighting
6-LED Interior and Marker Lights, L96 Series
Great little 6-LED lights have a variety of uses. They are 1-13/16” diameter overall and mount in a 1-3/8” diameter hole. Red and ambers are SAE/DOT rated as clearance lights. Provided with an optional stainless steel trim ring.
SKU: L96 -
Hot Rod Exterior Lighting
Billet Third Brake Light with Amber Turn Signals
The BEST pedestal 3rd Brake Lights. Clear lens – 15% brighter! 16-5/8″ wide, 3/4″ high (body), 1-1/8″ deep and only 2″ tall including the swivel base. 60 super bright red LED’s. Now get this light with the center 30 red LED’s as a dedicated brake light and each end with 15 super bright amber LED turn signals – really bright and super visible to make your ride safer than ever. (L61CA)
SKU: L61CA
