Reminder Buzzer (32032)
A good Reminder buzzer should do it’s job but not be too irritating. This new unit is just right and looks good enough to mount on your dash (matches L75 Series switches) or you van hide it underneath. The ring and the salt shaker center light with a red LED when buzzer sounds. mounts in a 3/4″ hole, chome bezel is 7/8″
$23.00
A good Reminder buzzer should do it’s job but not be too irritating. This new unit is just right and looks good enough to mount on your dash (matches L75 Series switches) or you van hide it underneath. The ring and the salt shaker center light with a red LED when buzzer sounds. mounts in a 3/4″ hole, chome bezel is 7/8″
| Weight | 0.00000000 lbs |
|---|---|
| Dimensions | 0.00000000 × 0.00000000 × 0.00000000 cm |
You may also like…
-
Hot Rod Ignition Security Systems
RFID Ignition Security Unit
This all new StreetWorks RFID is designed to work with your Hot Dot Ignition Systems or your existing key. This is the security system that your hot rod has been missing.
As you may already know the “HOT DOT” ignition takes the place of your conventional “keyed” ignition switch however it has no security built in. This all new RFID Security system gives you the security and convenience that today’s society demands.
What is RFID?
RFID stands for Radio-Frequency Identification. The acronym refers to small electronic devices that consist of a small chip and an antenna. The RFID device serves the same purpose as magnetic strip on the back of a credit card; it provides a unique identifier for that object. And, just as a magnetic strip must be scanned to get the information, the RFID device must be scanned to retrieve the identifying information.
The RFID unit has 3 different operating modes.
Mode 1: High security mode. The car only starts and stays running with the RFID fob in range.
Mode 2: Medium security mode. The RFID fob must be in range for car to start and will stay running until the operator turns it off, then it won’t restart.
Mode 3: NO security mode. Should your fob become lost or damaged you can over-ride the system by entering a code with the hidden button switch.
The RFID is capable of working between 5 and 200 feet with the vehicle’s windows closed. If the vehicle’s windows are open we do not have a measurement for how far away the unit will work. There are 8 increments of sensitivity that the unit can be programmed to.
SKU: WI-RFID -
Hot Rod Ignition Switch Systems
Hot Rod Push Button Starter Switch Kit
Push our Ignition Switch button once and your accessory circuit comes on. A second push and hold engages the starter. When your engine starts just release the switch and your running as well as the LED indicator ring. Press it once more and everything turns off. This gorgeous Stainless steel (22MM) switch mounts in a 7/8″ diameter hole with the overall size of 1′. The compact ignition module can hide under your dash or in the engine bay.
This kit will work with our smaller (16MM) momentary push button but be warned guys; you’ll be using your pinky.
Compare our price to any other Single Switch Ignition System anywhere! We were the first to bring this system to the street rod market and we know how to do it best!
Check out our full line of matching low profile, push button switches and indicator lights.
Note this unit requires securing your car. Check out our battery disconnects or simply install a hidden kill switch or, look at our RFID unit.
SKU: 12***
Related products
-
Specialty Flashers & Relays
Headlight Reminder Buzzer (32021)
There is nothing as embarrassing to a car guy as a dead battery because you left your lights on. This kit sounds our new Buzzer and the center lights red reminding you your lights are on but the key is either out of the ignition or in the off position. The kit includes the Buzzer, Module, and wiring instructions. Mounts in a 3/4″ hole and the chrome bezel is 7/8″
SKU: 32021 -
LED Dash Indicator Lights, Car Interior LED Lights
LED Indicator Lights (L18)
These “press in” LED indicator lights are small and easy to install. If your looking for a simple LED indicator that is not over powering to your dash then this is what you are looking for. There are 2 sizes available 5/32″ (0.156″) or 1/4″ (0250″) mounting hole.
SKU: L18 -
Specialty Flashers & Relays
Turn Signal Module (L-TSMOD)
If you have your own turn signal switches but need brake light override circuitry, get our Turn Signal Module. Full instructions and schematic. (NOTE: The Turn Signal Module is already included in all of our Turn Signal Switch Kits.) Wire leads, instructions and schematic. (Uses a single two-prong flasher, not provided.) Turn Signal Module is just 1-1/2″ square X 7/8″ high.
SKU: L-TSMOD -
Specialty Flashers & Relays
Programmable Electric Fan Controller
Dakota Digital’s PAC-2750 was designed for the ultimate in flexibility, and to be a simple add-on for electric fan(s). l 70 amp relay included. Fully programmable. Will work with your existing water temp gauge, operating from the temperature sending unit already installed! or a dedicated sending unit can be installed. Features fully programmable “fan on” and “fan off” temperatures to suit any application or personal preferences. Can leave the electric fan operating after the engine has been shut down for a user adjustable time. Full digital LED readout for displaying temperature readings and maintaining simple installation. Operating range: 150F – 250F. 3″ X 2.75″ X 1″ thick.
SKU: DK-PAC2750
