StreetWorks Door Solenoids More power. Fast action. 40 pounds of pull. Work with original latches. Solenoid and bracket measure 2-3/4″ wide by 2-1/16″ high (thick) by 4-1/4″ long. Solenoids & bracket(s) Only and instructions.
| # Solenoids w/Bracket Only | 2 Solenoids w/Brackets Only, 1 Solenoid w/Bracket Only |
|---|
You may also like…
-
Remotes & Keyless Entry Systems
Cable Installation Kit for Door Solenoids (L22C)
Why scrounge through hardware stores for the rest of the “kit” that those guys don’t sell? This kit puts together all of the little parts to connect actuators or solenoids to latches… for less than 12 bucks! Includes 30″ of aircraft cable, a delrin® pulley, wire stay, pulley mounting hardware, cable ends and instructions. Don’t waste time and money – get our kit and make your life a little easier.
SKU: L22C (One Door) -
Remotes & Keyless Entry Systems
StreetWorks Door Solenoids (L22N)
You want more power. You want fast action. StreetWorks Solenoids have it. They work the way you want, with 40 pounds of pull so they work with original latches. Solenoids, cables, pulleys, connectors, wire hardware and instructions. Solenoid and bracket measure approximately 2-3/4″ wide x 2-1/16″ high (thick) x 4-1/4″ long.
If you need more power than these solenoids have, you have a door problem.
SKU: L22N
Related products
-
Remotes & Keyless Entry Systems
Quadra 4 Function Remote Control with 3 Transmitters (L-QD4)
Our Quadra remote control has four functions – perfect for 2 power windows up-and-down. Or use it to open two doors or other operations plus 2 more functions for trunk release, battery disconnect, etc. Built-in user programming so that if the unit becomes deprogrammed, you can reprogram it yourself! It includes (2) built-in 30 amp relays for Channels #1 and #2 plus (2), 40 amp external relays for Channels #3 and #4. 12 ga. power wire leads. Built-in fuse holder with fuses. Pre-wired for Channel #1 and #2 backup switches (switches not included). Wow! It has (3), 4 button transmitters – a button for each function! Optional ignition disable. Connectors, great instructions… and it’s from StreetWorks so you know it’s good.
SKU: L-QD4 -
Remotes & Keyless Entry Systems
Booster Spring (L22-BS)
For those really tough original latches that need an extra “boost” to open, these springs will provide a preload on the latch mechanism so that less force is needed to release the latch. 4-1/2″ long zinc plated high-carbon steel springs have 4.40 pounds/inch of force. The cable connector allows you to adjust the pull to your needs.
SKU: L22-BS -
Remotes & Keyless Entry Systems
Hot Dot Remote Ignition Link
A great way to mount our L75 series switches – put an Ignition switch and an Accessory switch side-by-side. The plate is 1″ wide x 2″ long and secures with the switch nuts. L75 switches sold separately. This Ignition Link Relay allows you to enable and disable your StreetWorks Hot Dot Ignition Button using two (2) functions on a Remote Control (such as our Gemini, 2-function or other remote control). Push one remote control button and the Hot Dot Ignition operates, press a second button and disable the Hot Dot. Takes the place of a keylock to secure your car’s ignition. May be triggered by either positive or negative (grounding) momentary trigger signals. Remote Controls and Hot Dot sold separately. Can also be used as a latching On/Off relay, 12 vdc, 5 amps maximum load.
SKU: L88
