Square Shank Ford / Mopar Power Window Switches for Original “Crank” Handles (CA-EPWS-F)
3/8″ Square shank Ford / Mopar power window switches for your original “crank” handles.
Keep that original look and still install power windows in your ride with these switches. A slight push on the crank will open/close the window.
2-Door kit made by Carolina Custom.
$150.00
-
Hot Rod Handle Switch Kits and Power Window Crank Switches
Square Shank Ford / Mopar Power Window Switches for Original “Crank” Handles (CA-EPWS-F)
Hot Rod Handle Switch Kits and Power Window Crank SwitchesSquare Shank Ford / Mopar Power Window Switches for Original “Crank” Handles (CA-EPWS-F)
3/8″ Square shank Ford / Mopar power window switches for your original “crank” handles.
Keep that original look and still install power windows in your ride with these switches. A slight push on the crank will open/close the window.
2-Door kit made by Carolina Custom.
SKU: CA-EPWS-F -
Hot Rod Handle Switch Kits and Power Window Crank Switches
Dual Power Window Controller (PW-DWC)
Crank handle switches are great but not if the driver can’t control the passenger’s window. Leave it to Watsons StreetWorks to finally come up with a solution. Mount this dual controller box under your dash and run wires to both front doors. The passenger switch functions normally until the driver takes over. The drivers switch operates in 3 modes. By just holding the switch up or down the driver’s window responds normally. If the driver first gives the switch a single quick tap it is now controlling the passenger window for the next 20 seconds. By giving the switch 2 quick taps BOTH windows operate together for the next 20 seconds. The unit returns to normal function after the 20 seconds. Works with all power window switches, not just crank handles. Install into your new build or retro-fit into existing builds. Want your windows operating from a remote? This unit works with the remote as well so you can control both front windows with just 2 buttons on the remote. Includes built in relays, enough wire to reach both doors; connectors and instructions.
Note: This unit is not compatible with our Express Window Module.
SKU: PW-DWC
3/8″ Square shank Ford / Mopar power window switches for your original “crank” handles.
Keep that original look and still install power windows in your ride with these switches. A slight push on the crank will open/close the window.
2-Door kit made by Carolina Custom.
| Weight | 0.00000000 lbs |
|---|---|
| Dimensions | 0.00000000 × 0.00000000 × 0.00000000 cm |
You may also like…
-
Hot Rod Ignition Switch Systems
Hot Rod Push Button Starter Switch Kit
Push our Ignition Switch button once and your accessory circuit comes on. A second push and hold engages the starter. When your engine starts just release the switch and your running as well as the LED indicator ring. Press it once more and everything turns off. This gorgeous Stainless steel (22MM) switch mounts in a 7/8″ diameter hole with the overall size of 1′. The compact ignition module can hide under your dash or in the engine bay.
This kit will work with our smaller (16MM) momentary push button but be warned guys; you’ll be using your pinky.
Compare our price to any other Single Switch Ignition System anywhere! We were the first to bring this system to the street rod market and we know how to do it best!
Check out our full line of matching low profile, push button switches and indicator lights.
Note this unit requires securing your car. Check out our battery disconnects or simply install a hidden kill switch or, look at our RFID unit.
SKU: 12*** -
Hot Rod Handle Switch Kits and Power Window Crank Switches
Dual Power Window Controller (PW-DWC)
Crank handle switches are great but not if the driver can’t control the passenger’s window. Leave it to Watsons StreetWorks to finally come up with a solution. Mount this dual controller box under your dash and run wires to both front doors. The passenger switch functions normally until the driver takes over. The drivers switch operates in 3 modes. By just holding the switch up or down the driver’s window responds normally. If the driver first gives the switch a single quick tap it is now controlling the passenger window for the next 20 seconds. By giving the switch 2 quick taps BOTH windows operate together for the next 20 seconds. The unit returns to normal function after the 20 seconds. Works with all power window switches, not just crank handles. Install into your new build or retro-fit into existing builds. Want your windows operating from a remote? This unit works with the remote as well so you can control both front windows with just 2 buttons on the remote. Includes built in relays, enough wire to reach both doors; connectors and instructions.
Note: This unit is not compatible with our Express Window Module.
SKU: PW-DWC -
Hot Rod Ignition Security Systems
RFID Ignition Security Unit
This all new StreetWorks RFID is designed to work with your Hot Dot Ignition Systems or your existing key. This is the security system that your hot rod has been missing.
As you may already know the “HOT DOT” ignition takes the place of your conventional “keyed” ignition switch however it has no security built in. This all new RFID Security system gives you the security and convenience that today’s society demands.
What is RFID?
RFID stands for Radio-Frequency Identification. The acronym refers to small electronic devices that consist of a small chip and an antenna. The RFID device serves the same purpose as magnetic strip on the back of a credit card; it provides a unique identifier for that object. And, just as a magnetic strip must be scanned to get the information, the RFID device must be scanned to retrieve the identifying information.
The RFID unit has 3 different operating modes.
Mode 1: High security mode. The car only starts and stays running with the RFID fob in range.
Mode 2: Medium security mode. The RFID fob must be in range for car to start and will stay running until the operator turns it off, then it won’t restart.
Mode 3: NO security mode. Should your fob become lost or damaged you can over-ride the system by entering a code with the hidden button switch.
The RFID is capable of working between 5 and 200 feet with the vehicle’s windows closed. If the vehicle’s windows are open we do not have a measurement for how far away the unit will work. There are 8 increments of sensitivity that the unit can be programmed to.
SKU: WI-RFID
Related products
-
Custom Hot Rod Switch Panels, Hot Rod Power Window Switches
3 Wire Paddle Rocker Power Window Switch Kit for 4-Door Car
Custom Hot Rod Switch Panels, Hot Rod Power Window Switches3 Wire Paddle Rocker Power Window Switch Kit for 4-Door Car
Beautiful billet 3 wire power window switches now in kits for 4-door cars. Comes with paddle rockers. You get a 4 switch panel for the driver’s door and 3 single switch panels for each of the other doors.
Kit includes: switches with panels, polarity reversing modules, wiring connectors, and instructions.
Don’t know if you have Polarity reversing Motors? See the Product Instructions Tab to determine if your motors are Polarity reversing or Non-Polarity reversing.
SKU: L39B4DRP -
Hot Rod Power Window Switches
Double Billet Power Window Switch (L39BD#), Rectangle
Our dual power window rocker switch sits inside an billet frame that’s only 2″ wide by 1-3/4″ high. Adapt directly to positive (+) output remotes – no extra relays required!
Dual Switch
Dual switch kit for center console mounting or for both switches on the driver door only.
Kit includes: Dual switch frame with swithes, (2) polarity reversing modules, wire leads and instructions.
Available with either a dimpled or paddle style rocker. Switch and frame have a brushed aluminum finish.
Don’t know if you have Polarity reversing Motors? See the Product Instructions Tab to determine if your motors are Polarity reversing or Non-Polarity reversing.
SKU: L39BD# -
Hot Rod Power Window Switches
4 Door Dimpled 3 Wire Switch Kit (L39B4DR)
Beautiful billet 3 wire power window switches now in kits for 4-door cars. Comes with dimpled rockers. You get a 4 switch panel for the driver’s door and 3 single switch panels for each of the other doors.
Kit includes: switches with panels, polarity reversing modules, wiring connectors, and instructions.
Don’t know if you have Polarity reversing Motors? See the Product Instructions Tab to determine if your motors are Polarity reversing or Non-Polarity reversing.
SKU: L39B4DR
