Stainless Steel Braided Door Wire Looms (TP-SSDWL-1/2)
The added looks of stainless braid, the door jams are 1/2″ O.D. x 3/8″ I.D. x 7+” effective length. One fixed and one sliding threaded aluminum boss. Plastic lined. Mount into 3/4″ Diameter holes with jam nuts included.
The sliding collars may be trimmed shorter when going through less material.
$54.00
The added looks of stainless braid, the door jams are 1/2″ O.D. x 3/8″ I.D. x 7+” effective length. One fixed and one sliding threaded aluminum boss. Plastic lined. Mount into 3/4″ Diameter holes with jam nuts included.
The sliding collars may be trimmed shorter when going through less material.
| Weight | 0.00000000 lbs |
|---|---|
| Dimensions | 0.00000000 × 0.00000000 × 0.00000000 cm |
You may also like…
-
Hot Rod Ignition Security Systems
RFID Ignition Security Unit
This all new StreetWorks RFID is designed to work with your Hot Dot Ignition Systems or your existing key. This is the security system that your hot rod has been missing.
As you may already know the “HOT DOT” ignition takes the place of your conventional “keyed” ignition switch however it has no security built in. This all new RFID Security system gives you the security and convenience that today’s society demands.
What is RFID?
RFID stands for Radio-Frequency Identification. The acronym refers to small electronic devices that consist of a small chip and an antenna. The RFID device serves the same purpose as magnetic strip on the back of a credit card; it provides a unique identifier for that object. And, just as a magnetic strip must be scanned to get the information, the RFID device must be scanned to retrieve the identifying information.
The RFID unit has 3 different operating modes.
Mode 1: High security mode. The car only starts and stays running with the RFID fob in range.
Mode 2: Medium security mode. The RFID fob must be in range for car to start and will stay running until the operator turns it off, then it won’t restart.
Mode 3: NO security mode. Should your fob become lost or damaged you can over-ride the system by entering a code with the hidden button switch.
The RFID is capable of working between 5 and 200 feet with the vehicle’s windows closed. If the vehicle’s windows are open we do not have a measurement for how far away the unit will work. There are 8 increments of sensitivity that the unit can be programmed to.
SKU: WI-RFID -
Hot Rod Ignition Switch Systems
Hot Rod Push Button Starter Switch Kit
Push our Ignition Switch button once and your accessory circuit comes on. A second push and hold engages the starter. When your engine starts just release the switch and your running as well as the LED indicator ring. Press it once more and everything turns off. This gorgeous Stainless steel (22MM) switch mounts in a 7/8″ diameter hole with the overall size of 1′. The compact ignition module can hide under your dash or in the engine bay.
This kit will work with our smaller (16MM) momentary push button but be warned guys; you’ll be using your pinky.
Compare our price to any other Single Switch Ignition System anywhere! We were the first to bring this system to the street rod market and we know how to do it best!
Check out our full line of matching low profile, push button switches and indicator lights.
Note this unit requires securing your car. Check out our battery disconnects or simply install a hidden kill switch or, look at our RFID unit.
SKU: 12***
Related products
-
Wire Routing for Hot Rods
Billet Wire Pass-through (B21)
A really attractive way to dress up the area where the wires come through the firewall. Unit measures 1-1/2″ wide X 2″ tall X 1″ deep with a wire exit size of 1″ wide X 3/4″ deep. Blind fastens from behind for that smooth look. Hardware and template included.
SKU: B21 -
Wire Routing for Hot Rods
Billet ECU Wire Pass Through (WI-001)
An attractive cover with machined grooves to dress up where wire bundles pass through the firewall. This wire pass through was designed with large Fuel Injection harnesses in mind. The pass through comes with a fitted grommet with a 1″ precut split top hole for ease of installation and can be trimmed. The grommet can be opened up to a maximum of 1 5/8″ and has relief cuts to assist with trimming. The design of the pass through allows this piece to be added onto a completed vehicle with minimum effort.
Overall dimensions are 4 5/8″ tall x 2 1/4″ wide x 11/32″ deep on top and 2 1/8″ deep on bottom.
Inside dimensions are 3 3/4″ tall x 1 3/4″ wide x 5/8″ deep on top and 1 15/16″ deep on bottom.
SKU: WI-001 -
Wire Routing for Hot Rods
Nylon and Billet Door Wire Looms (TP-NYLON-1/2)
The look of Billet & Black, the door looms are 1/2″ O.D. x 3/8″ I.D. x 7+” effective length. 1 One fixed and one sliding aluminum boss. Plastic lined. 1 Mount into 3/4″ and 5/8″ Diameter holes with set screw secured “quick” collars.
SKU: TP-NYLON-1/2 -
Wire Routing for Hot Rods
Billet Wire Port (B16)
Here is a great way to dress up the area of the firewall where the wiring harness goes through. The Wire Port main body is 2″ dia. with a 1-1/2″ inside dia. and is secured to the firewall around the wire bundle hole with four (4) truss head screws. A 1″ x 13/16″ deep cut-out in the Wire Port body allows the wire bundle to exit close to the firewall (a rubber grommet is included for smaller wire bundles). The body is then capped off with an attractive machined cover which has three (3) ball-milled grooves. The design allows for the wire bundle to be installed before the final attachment of the Wire Port is done. Attractive, functional and at a very reasonable price.
SKU: B16
