4-Way VW Turn Signal Hazard Wiring (WI-4WX)
If you no longer have the original turn signal/4-way relay module or switch and still are using your original style taillights, this wiring will restore 4-way capability without the expense ($50 – $70!) of a new module and wiring. Also works with our Turn Signal Relay Pack if you are switching to non-separate turn signal/brake lights like 1157 bulb units. Use with your own On/Off switch or see our switch selection above. (switch not included)
$10.00
If you no longer have the original turn signal/4-way relay module or switch and still are using your original style taillights, this wiring will restore 4-way capability without the expense ($50 – $70!) of a new module and wiring. Also works with our Turn Signal Relay Pack if you are switching to non-separate turn signal/brake lights like 1157 bulb units. Use with your own On/Off switch or see our switch selection above. (switch not included)
| Weight | 0.00000000 lbs |
|---|---|
| Dimensions | 0.00000000 × 0.00000000 × 0.00000000 cm |
You may also like…
-
Hot Rod Ignition Security Systems
RFID Ignition Security Unit
This all new StreetWorks RFID is designed to work with your Hot Dot Ignition Systems or your existing key. ย This is the security system that your hot rod has been missing.
As you may already know the โHOT DOTโ ignition takes the place of your conventional โkeyedโ ignition switch however it has no security built in.ย This all new RFID Security system gives you the security and convenience that today’s society demands.
What is RFID?ย
RFID stands forย Radio-Frequency Identification. The acronym refers to small electronic devices that consist of a small chip and an antenna.ย The RFID device serves the same purpose as magnetic strip on the back of a credit card; it provides a unique identifier for that object. And, just as a magnetic strip must be scanned to get the information, the RFID device must be scanned to retrieve the identifying information.
The RFID unit has 3 different operating modes.
Mode 1:ย High security mode. The car only starts and stays running with the RFID fob in range.
Mode 2:ย Medium security mode. The RFID fob must be in range for car to start and will stay running until the operator turns it off, then it wonโt restart.
Mode 3:ย NO security mode. Should your fob become lost or damaged you can over-ride the system by entering a code with the hidden button switch.
The RFID is capable of working between 5 and 200 feet with the vehicleโs windows closed.ย If the vehicleโs windows are open we do not have a measurement for how far away the unit will work. ย There are 8 increments of sensitivity that the unit can be programmed to.
SKU: WI-RFID -
Hot Rod Wire Harness Kits and Parts
VW Beetle Bug Deluxe Wiring Harness
16 Circuit universal harness, Horn Relay, Lights, cell phone charger, Hazard, Gauge Power, Wiper, Brake Lights, AC-Heat, Back-up,Radio Constant, Turn signal, Dome light, Trunk Light and 2 Accessory Circuits both Keyed.ย
12 Fuse panel with 3 prong flasher and Horn Relay.
Assembled with heavy duty SXL wire, labeled every 6″ and bundled for easy installation.Glass body buggys should use this BUG HARNESS
KIT INCLUDES BASIC AUTO ELECTRICITY BOOK
SKU: WI-VW -
Hot Rod Ignition Switch Systems
Hot Rod Push Button Starter Switch Kit
Push our Ignition Switch button once and your accessory circuit comes on. A second push and hold engages the starter. When your engine starts just release the switch and your running as well as the LED indicator ring. Press it once more and everything turns off. This gorgeous Stainless steel (22MM) switch mounts in a 7/8″ diameter hole with the overall size of 1′.ย ย The compact ignition module can hide under your dash or in the engine bay.
This kit will work with our smaller (16MM) momentary push button but be warned guys; youโll be using your pinky.
Compare our price to any other Single Switch Ignition System anywhere! We were the first to bring this system to the street rod market and we know how to do it best!
Check out our full line of matching low profile, push button switches and indicator lights.
Note this unit requires securing your car. Check out our battery disconnects or simply install a hidden kill switch or, look at ourย RFID unit.
SKU: 12***
Related products
-
Hot Rod Exterior Lighting
Hot Slot Auxilary LED Tail Light & Turn Signal Kit
Your choice of Amber or Red LED’s.
Our kit features (2) – 4 Super Bright LED units with diffuser lenses that mount inside aluminum housings, included. 1/2″ thick build-in, flush mounted clear acrylic lenses to fit into slightly curved fenders for a seamless look. (The acrylic lenses can not be bent. The acrylic is body worked to be flush with the fender surface.) The lenses are only 1/2″ wide by 1-3/4″ long! Kit includes dual intensity convertors to give park lights and turn signals. Need only 1″ of clearance space behind the mounting surface. Weld-in or glass-in studs for mounting are included. Quality instructions. Really cool stuff!
SKU: L63# -
Hot Rod Exterior Lighting
Water proof LED Strips
These LED strips are encased in clear waterproof plastic so use them where ever you want. They have peal & stick backing and just to be sure we include mounting clips as well. Each flexable strip is 1/2″ wide and about 1/4″ thick. We sell them in lenghts from 2″ย to 36″, and they come in 5 colors, red, amber, blue, cool white and warm white. Each light you order has lead wires attached.ย The strips are marked in 2″ segments (3 LEDs per segment). You can actualy cut them at the marking, attach new leads, seal the ends and you have a 2nd light!
Prices range from just $8.00 for a 2″ strip up to $84.00 for a full 36 inches. Click on the “add to cart” box to select your color & length.
Get creative! From foot box or trunk lights to full blown under car ground effect lighting this is the solution you’ve been looking for.
SKU: 23*** -
Aftermarket Backup Lights for Hot Rods, Hot Rod Exterior Lighting
Double-D LED Taillights with Bright White LED Backup Lights (L58-DD-BU)
Aftermarket Backup Lights for Hot Rods, Hot Rod Exterior LightingDouble-D LED Taillights with Bright White LED Backup Lights (L58-DD-BU)
Double-D taillights with twice the diodes – two strips of 50 super bright LEDโs per light plus super bright white LEDs for backup lights all inside an aluminum housing. Build-in, flush mount clear acrylic lenses are 1/4โ thick, 1/2โ wide and 15-1/4โ long plus diffuser. Each red strip is split 30-20 and are wired separately so that you can wire the strips together or not. Works with integral turn/brake systems or on vehicles with separate turn signals. Hardware and dual intensity convertors included.
SKU: L58-DD-BU
