3 1/4″ Drop in Illuminated Disc for Cup Holders (Pair) (IL-21#)
We have decided to sell these illuminated discs as an add on for your existing cup holders.ย All you have to do is drill a 1/4″ hole in the bottom of your existing cup holder and pass the wires through. ย It’s a simple 2 wire installation consisting of power and ground. ย You can switch it on with your headlights or an aux. switch.
NOTE: Cup Holders Sold Separatelyย
These drop in discs fit the large 43021 stainless cup holders.
$52.00
We have decided to sell these illuminated discs as an add on for your existing cup holders.ย All you have to do is drill a 1/4″ hole in the bottom of your existing cup holder and pass the wires through. ย It’s a simple 2 wire installation consisting of power and ground. ย You can switch it on with your headlights or an aux. switch.
NOTE: Cup Holders Sold Separatelyย
These drop in discs fit the large 43021 stainless cup holders.
https://www.streetmusclemag.com/news/more-led-innovation-from-watsons-streetworks/
| Weight | 0.00000000 lbs |
|---|---|
| Dimensions | 0.00000000 × 0.00000000 × 0.00000000 cm |
| Disc Color | White, Red, Green, Blue, Amber |
You may also like…
-
Hot Rod Ignition Security Systems
RFID Ignition Security Unit
This all new StreetWorks RFID is designed to work with your Hot Dot Ignition Systems or your existing key. ย This is the security system that your hot rod has been missing.
As you may already know the โHOT DOTโ ignition takes the place of your conventional โkeyedโ ignition switch however it has no security built in.ย This all new RFID Security system gives you the security and convenience that today’s society demands.
What is RFID?ย
RFID stands forย Radio-Frequency Identification. The acronym refers to small electronic devices that consist of a small chip and an antenna.ย The RFID device serves the same purpose as magnetic strip on the back of a credit card; it provides a unique identifier for that object. And, just as a magnetic strip must be scanned to get the information, the RFID device must be scanned to retrieve the identifying information.
The RFID unit has 3 different operating modes.
Mode 1:ย High security mode. The car only starts and stays running with the RFID fob in range.
Mode 2:ย Medium security mode. The RFID fob must be in range for car to start and will stay running until the operator turns it off, then it wonโt restart.
Mode 3:ย NO security mode. Should your fob become lost or damaged you can over-ride the system by entering a code with the hidden button switch.
The RFID is capable of working between 5 and 200 feet with the vehicleโs windows closed.ย If the vehicleโs windows are open we do not have a measurement for how far away the unit will work. ย There are 8 increments of sensitivity that the unit can be programmed to.
SKU: WI-RFID -
Hot Rod Ignition Switch Systems
Hot Rod Push Button Starter Switch Kit
Push our Ignition Switch button once and your accessory circuit comes on. A second push and hold engages the starter. When your engine starts just release the switch and your running as well as the LED indicator ring. Press it once more and everything turns off. This gorgeous Stainless steel (22MM) switch mounts in a 7/8″ diameter hole with the overall size of 1′.ย ย The compact ignition module can hide under your dash or in the engine bay.
This kit will work with our smaller (16MM) momentary push button but be warned guys; youโll be using your pinky.
Compare our price to any other Single Switch Ignition System anywhere! We were the first to bring this system to the street rod market and we know how to do it best!
Check out our full line of matching low profile, push button switches and indicator lights.
Note this unit requires securing your car. Check out our battery disconnects or simply install a hidden kill switch or, look at ourย RFID unit.
SKU: 12***
Related products
-
LED Dash Indicator Lights, Car Interior LED Lights
Small Chrome Low Profile LED Indicators (240**)
These beautiful Low profile LED indicator light add a great look to your dash without being big and bulky. They go great with our “Hot Dot” push button switches. They are available in two sizes, Small one is 7/16′ and mounts in a 5/16′ diameter hole. Purchase small indicators shown on the right in the picture on this page.
The large one is 5/8″ and mounts in a 15/32 diameter hole. Easy 2 wire connections will make this indicator light a great addition to you project. ย To purchase the Large low profile indicators type “Large Chrome Indicator Light” in the search bar.
SKU: 240** -
Car Interior LED Lights
Blue LED Illuminator
An LED that’s bright enough to use for illumination? YES! Leave it to StreetWorks to find it. Use this little beauty for lighting up your glove box or ash tray, add accent lighting inside or out (imagine putting one in each of the hood holes of an old Oldsmobile!) It’s very small size makes it easy to snap into a .156″ hole or just RTV or epoxy in place. Pale blue color provides a nice hue at night. NOTE: This LED is too bright for use as an indicator light! See our LED Indicators under Indicator Lights.
SKU: L18BRB-5/32 -
Courtesy Lights, Car Interior LED Lights
Bright White Illuminator LED Interior Accent Lighting
A little bigger and a little brighter than the Bright Blue LED. Use for interior accent lighting (not for courtesy or dome lights), license plate lights (2 minimum recommended), glove box, ash tray and a hundred other uses. It’s small size makes it easy to snap into a 1/4″ diameter hole or just RTV or epoxy in place. NOTE: This LED is too bright for use as an indicator light! See our LED Indicators under Indicator Lights.
SKU: L18BRW-1/4 -
Hot Rod Cup Holders
Illuminated Medium Natural Aluminum Cup Holders (IT-MAC#)
We have added the option for accent lighting on all of our cup holders. ย Here are our medium natural aluminum cup holders that measure 3 1/4″ย ID by 3″ย deep with a 4โ flange. ย These are available in your choice of Amber, Blue, Green, Red or White.
SKU: IT-MAC#
