Backup mirror/camera system with License plate camera (IT-MIR-LP)
A Watsons StreetWorks exclusive! Weโve placed a 4.3 inch screen in a custom billet center mirror that will look great in any ride. We offer 2 styles of cameras to make the installation easy. Wiring the system is amazingly easy, just supply power and ground to the camera and screen, then one wire joins the 2. When you put your vehicle in reverse the solid state screen comes on instantly. The smoked glass on the mirror looks great when the screen is off and cuts the nighttime glare from lights behind you.ย Mount the mirror on your dash or overhead. The arm pivots at both ends giving you plenty of adjustment.ย The mirror measures 3″ by 6″ overall and the base is 2-ยฝ” by ยพ”.ย The arm is 2-ยฝ” long. The screen has several adjustments including contrast, brightness, etc.ย Choose from either a license plate mounted camera or a body mounted unit. Both packages include the billet framed mirror/screen with mounting hardware, a waterproof camera, wire and instructions.
The license plate camera mounts behind your plate with just the tiny camera sticking over. Run the wire through a small, 7/32″ hole.
$299.00
A Watsons StreetWorks exclusive! Weโve placed a 4.3 inch screen in a custom billet center mirror that will look great in any ride. We offer 2 styles of cameras to make the installation easy. Wiring the system is amazingly easy, just supply power and ground to the camera and screen, then one wire joins the 2. When you put your vehicle in reverse the solid state screen comes on instantly. The smoked glass on the mirror looks great when the screen is off and cuts the nighttime glare from lights behind you.ย Mount the mirror on your dash or overhead. The arm pivots at both ends giving you plenty of adjustment.ย The mirror measures 3″ by 6″ overall and the base is 2-ยฝ” by ยพ”.ย The arm is 2-ยฝ” long. The screen has several adjustments including contrast, brightness, etc.ย Choose from either a license plate mounted camera or a body mounted unit. Both packages include the billet framed mirror/screen with mounting hardware, a waterproof camera, wire and instructions.
The license plate camera mounts behind your plate with just the tiny camera sticking over. Run the wire through a small, 7/32″ hole.
https://www.streetmusclemag.com/tech-stories/other-tech/safety-and-style-watsons-streetworks-universal-backup-camera/
| Weight | 0.00000000 lbs |
|---|---|
| Dimensions | 0.00000000 × 0.00000000 × 0.00000000 cm |
You may also like…
-
Hot Rod Ignition Switch Systems
Hot Rod Push Button Starter Switch Kit
Push our Ignition Switch button once and your accessory circuit comes on. A second push and hold engages the starter. When your engine starts just release the switch and your running as well as the LED indicator ring. Press it once more and everything turns off. This gorgeous Stainless steel (22MM) switch mounts in a 7/8″ diameter hole with the overall size of 1′.ย ย The compact ignition module can hide under your dash or in the engine bay.
This kit will work with our smaller (16MM) momentary push button but be warned guys; youโll be using your pinky.
Compare our price to any other Single Switch Ignition System anywhere! We were the first to bring this system to the street rod market and we know how to do it best!
Check out our full line of matching low profile, push button switches and indicator lights.
Note this unit requires securing your car. Check out our battery disconnects or simply install a hidden kill switch or, look at ourย RFID unit.
SKU: 12*** -
Hot Rod Ignition Security Systems
RFID Ignition Security Unit
This all new StreetWorks RFID is designed to work with your Hot Dot Ignition Systems or your existing key. ย This is the security system that your hot rod has been missing.
As you may already know the โHOT DOTโ ignition takes the place of your conventional โkeyedโ ignition switch however it has no security built in.ย This all new RFID Security system gives you the security and convenience that today’s society demands.
What is RFID?ย
RFID stands forย Radio-Frequency Identification. The acronym refers to small electronic devices that consist of a small chip and an antenna.ย The RFID device serves the same purpose as magnetic strip on the back of a credit card; it provides a unique identifier for that object. And, just as a magnetic strip must be scanned to get the information, the RFID device must be scanned to retrieve the identifying information.
The RFID unit has 3 different operating modes.
Mode 1:ย High security mode. The car only starts and stays running with the RFID fob in range.
Mode 2:ย Medium security mode. The RFID fob must be in range for car to start and will stay running until the operator turns it off, then it wonโt restart.
Mode 3:ย NO security mode. Should your fob become lost or damaged you can over-ride the system by entering a code with the hidden button switch.
The RFID is capable of working between 5 and 200 feet with the vehicleโs windows closed.ย If the vehicleโs windows are open we do not have a measurement for how far away the unit will work. ย There are 8 increments of sensitivity that the unit can be programmed to.
SKU: WI-RFID
Related products
-
Hot Rod & Automotive Interior Display Trim
Backup mirror/camera system with through hole camera (IT-MIR-TH)
Hot Rod & Automotive Interior Display TrimBackup mirror/camera system with through hole camera (IT-MIR-TH)
A Watsons StreetWorks exclusive! Weโve placed a 4.3 inch screen in a custom billet center mirror that will look great in any ride. We offer 2 styles of cameras to make the installation easy. Wiring the system is amazingly easy, just supply power and ground to the camera and screen, then one wire joins the 2. When you put your vehicle in reverse the solid state screen comes on instantly. The smoked glass on the mirror looks great when the screen is off and cuts the nighttime glare from lights behind you.ย Mount the mirror on your dash or overhead. The arm pivots at both ends giving you plenty of adjustment.ย The mirror measures 3″ by 6″ overall and the base is 2-ยฝ” by ยพ”.ย The arm is 2-ยฝ” long. The screen has several adjustments including contrast, brightness, etc.ย Choose from either a license plate mounted camera or a body mounted unit. Both packages include the billet framed mirror/screen with mounting hardware, a waterproof camera, wire and instructions.
To mount the through hole camera simply drill a ยพ” hole on a level body panel.
SKU: IT-MIR-TH -
Hot Rod & Automotive Interior Display Trim
Dual Port Billet USB charger and Volt Meter (IT-USB)
This beautiful Billet USB Charger and Volt Meter will charge 2 phones or other devices while you’re on the road. It measures 1 ยพโ dia. face, 2 ยฝโ deep, and fits in a 1 ยฝโ hole. This handy unit also checks the vehicleโs voltage.
The LED Display shows the power/charging status of the device(s) plugged into it. Both ports are high output ports. Capable of pushing 2.4ย amps per port and has the typical USB charger of 5.0 volts.
Product comes with wires, mounting bracket and screws and, instructions.
SKU: IT-USB -
Hot Rod & Automotive Interior Display Trim
License Plate Mounted Backup Camera Monitor (IT-MON-LP)
A Backup Screen for Your Console!
When we introduced our mirror /screen backup system it was a huge success but many folks need a unit for their center console. Well here it is. The large 5″ screen is mounted in a billet frame measuring 5-ยผ” wide by 4″ tall. You will need less than an inch of backspace. Sold with either a through hole or license plate mounted camera.
SKU: IT-MON-LP
