Billet ECU Wire Pass Through (WI-001)
An attractive cover with machined grooves to dress up where wire bundles pass through the firewall. ย This wire pass through was designed with large Fuel Injection harnesses in mind. ย The pass through comes with a fitted grommet with a 1″ precut split top hole for ease of installation and can be trimmed. ย The grommet can be opened up to a maximum of 1 5/8″ and has relief cuts to assist with trimming. ย The design of the pass through allows this piece to be added onto a completed vehicle with minimum effort.
Overall dimensionsย are 4 5/8″ tallย x 2 1/4″ wide xย 11/32″ deep on top andย 2 1/8″ deep on bottom. ย
Inside dimensions are 3 3/4″ tall x 1 3/4″ wideย x 5/8″ deep on top and 1 15/16″ deep on bottom.
$119.00 – $124.00
An attractive cover with machined grooves to dress up where wire bundles pass through the firewall. ย This wire pass through was designed with large Fuel Injection harnesses in mind. ย The pass through comes with a fitted grommet with a 1″ precut split top hole for ease of installation and can be trimmed. ย The grommet can be opened up to a maximum of 1 5/8″ and has relief cuts to assist with trimming. ย The design of the pass through allows this piece to be added onto a completed vehicle with minimum effort.
Overall dimensionsย are 4 5/8″ tallย x 2 1/4″ wide xย 11/32″ deep on top andย 2 1/8″ deep on bottom. ย
Inside dimensions are 3 3/4″ tall x 1 3/4″ wideย x 5/8″ deep on top and 1 15/16″ deep on bottom.
https://www.youtube.com/watch?v=azDdMU4lJ7I
| Weight | 0.00000000 lbs |
|---|---|
| Dimensions | 0.00000000 × 0.00000000 × 0.00000000 cm |
| Finish | Brushed Finish, Raven Black Finish |
You may also like…
-
Hot Rod Ignition Security Systems
RFID Ignition Security Unit
This all new StreetWorks RFID is designed to work with your Hot Dot Ignition Systems or your existing key. ย This is the security system that your hot rod has been missing.
As you may already know the โHOT DOTโ ignition takes the place of your conventional โkeyedโ ignition switch however it has no security built in.ย This all new RFID Security system gives you the security and convenience that today’s society demands.
What is RFID?ย
RFID stands forย Radio-Frequency Identification. The acronym refers to small electronic devices that consist of a small chip and an antenna.ย The RFID device serves the same purpose as magnetic strip on the back of a credit card; it provides a unique identifier for that object. And, just as a magnetic strip must be scanned to get the information, the RFID device must be scanned to retrieve the identifying information.
The RFID unit has 3 different operating modes.
Mode 1:ย High security mode. The car only starts and stays running with the RFID fob in range.
Mode 2:ย Medium security mode. The RFID fob must be in range for car to start and will stay running until the operator turns it off, then it wonโt restart.
Mode 3:ย NO security mode. Should your fob become lost or damaged you can over-ride the system by entering a code with the hidden button switch.
The RFID is capable of working between 5 and 200 feet with the vehicleโs windows closed.ย If the vehicleโs windows are open we do not have a measurement for how far away the unit will work. ย There are 8 increments of sensitivity that the unit can be programmed to.
SKU: WI-RFID -
Hot Rod Ignition Switch Systems
Hot Rod Push Button Starter Switch Kit
Push our Ignition Switch button once and your accessory circuit comes on. A second push and hold engages the starter. When your engine starts just release the switch and your running as well as the LED indicator ring. Press it once more and everything turns off. This gorgeous Stainless steel (22MM) switch mounts in a 7/8″ diameter hole with the overall size of 1′.ย ย The compact ignition module can hide under your dash or in the engine bay.
This kit will work with our smaller (16MM) momentary push button but be warned guys; youโll be using your pinky.
Compare our price to any other Single Switch Ignition System anywhere! We were the first to bring this system to the street rod market and we know how to do it best!
Check out our full line of matching low profile, push button switches and indicator lights.
Note this unit requires securing your car. Check out our battery disconnects or simply install a hidden kill switch or, look at ourย RFID unit.
SKU: 12***
Related products
-
Hot Rod Power Window Switches
4 Door Dimpled 3 Wire Switch Kit (L39B4DR)
Beautiful billet 3ย wire power window switches now in kits for 4-door cars.ย Comes withย dimpled rockers.ย You get aย 4 switchย panel for the driver’s door and 3 single switch panels for each of the other doors.ย
Kit includes:ย switches with panels, polarity reversing modules,ย wiring connectors,ย and instructions.
Donโt know if you have Polarity reversing Motors?ย See the Product Instructions Tab to determine if your motors are Polarity reversing or Non-Polarity reversing.
SKU: L39B4DR -
Hot Rod Interior Column Trim
Steering Column Trim / Lightning Roll Cage Pass Through (B03N)
Give your steering column the finished look with our machined aluminum trim with heavy duty rubber seal. Made with StreetWorks unique Split ‘n’ Pinned design for easy installation – no column removal required. The ring measures 3.420″ I.D. and 4.800″ O.D. and includes stainless steel mounting screws. The rubber seal has an opening to fit GM and other columns measuring 1-3/4″ to approximately 2-1/8″ diameter. Some trimming may be required for larger diameters. Now with an additional grommet to fit 1-1/2″ diameter columns.
These trim rings also double as a pretty sweet finishing piece for your Ford Lightning roll cage pass through. ย Of course these will work for virtually any other roll cage pass through you can think of but they are commonly used in the Lightning application.
SKU: B03N -
