Circuit Status Indicator Relay Kit
Ever have a circuit that you wanted specific feedback about – as to when it turned ON and OFF? This Relay kit, along with two indicator lights (not included) will give you that information. Our kit contains the relay, 24″ wire leads, and instruction for use. Works great for radiator fans, battery disconnects, fuel pump, etc. Use with any of our LED indicator lights (for example: green = ON, red = OFF) to provide positive, visual status indication (lights not included).
$15.00
Ever have a circuit that you wanted specific feedback about – as to when it turned ON and OFF? This Relay kit, along with two indicator lights (not included) will give you that information. Our kit contains the relay, 24″ wire leads, and instruction for use. Works great for radiator fans, battery disconnects, fuel pump, etc. Use with any of our LED indicator lights (for example: green = ON, red = OFF) to provide positive, visual status indication (lights not included).
| Weight | 0.00000000 lbs |
|---|---|
| Dimensions | 0.00000000 × 0.00000000 × 0.00000000 cm |
You may also like…
-
Hot Rod Ignition Switch Systems
Hot Rod Push Button Starter Switch Kit
Push our Ignition Switch button once and your accessory circuit comes on. A second push and hold engages the starter. When your engine starts just release the switch and your running as well as the LED indicator ring. Press it once more and everything turns off. This gorgeous Stainless steel (22MM) switch mounts in a 7/8″ diameter hole with the overall size of 1′.ย ย The compact ignition module can hide under your dash or in the engine bay.
This kit will work with our smaller (16MM) momentary push button but be warned guys; youโll be using your pinky.
Compare our price to any other Single Switch Ignition System anywhere! We were the first to bring this system to the street rod market and we know how to do it best!
Check out our full line of matching low profile, push button switches and indicator lights.
Note this unit requires securing your car. Check out our battery disconnects or simply install a hidden kill switch or, look at ourย RFID unit.
SKU: 12*** -
Hot Rod Ignition Security Systems
RFID Ignition Security Unit
This all new StreetWorks RFID is designed to work with your Hot Dot Ignition Systems or your existing key. ย This is the security system that your hot rod has been missing.
As you may already know the โHOT DOTโ ignition takes the place of your conventional โkeyedโ ignition switch however it has no security built in.ย This all new RFID Security system gives you the security and convenience that today’s society demands.
What is RFID?ย
RFID stands forย Radio-Frequency Identification. The acronym refers to small electronic devices that consist of a small chip and an antenna.ย The RFID device serves the same purpose as magnetic strip on the back of a credit card; it provides a unique identifier for that object. And, just as a magnetic strip must be scanned to get the information, the RFID device must be scanned to retrieve the identifying information.
The RFID unit has 3 different operating modes.
Mode 1:ย High security mode. The car only starts and stays running with the RFID fob in range.
Mode 2:ย Medium security mode. The RFID fob must be in range for car to start and will stay running until the operator turns it off, then it wonโt restart.
Mode 3:ย NO security mode. Should your fob become lost or damaged you can over-ride the system by entering a code with the hidden button switch.
The RFID is capable of working between 5 and 200 feet with the vehicleโs windows closed.ย If the vehicleโs windows are open we do not have a measurement for how far away the unit will work. ย There are 8 increments of sensitivity that the unit can be programmed to.
SKU: WI-RFID
Related products
-
LED Dash Indicator Lights, Car Interior LED Lights
Large Chrome Low Profile LED Indicators
These beautiful Low profile LED indicator light add a great look to your dash without being big and bulky. They go great with our “Hot Dot” push button switches. They are avalible in two sizes, โThe large one is 5/8″ and mounts in a 15/32 diameter hole. Purchase large indicators shown on the leftย in the picture on this page.
Small one is 7/16′ and mounts in a 5/16′ diameter hole.ย ย Easy 2 wire connections will make this indicator light a great addition to you project. ย To purchase the Small low profile indicator, type “Small Chrome Indicator” in the search bar.
SKU: 241xx -
LED Dash Indicator Lights, Car Interior LED Lights
LED Indicator Lights (L18)
These “press in” LED indicator lights are small and easy to install. If your looking for a simple LED indicator that is not over powering to your dash then this is what you are looking for. There are 2 sizes available 5/32″ (0.156″) or 1/4″ (0250″) mounting hole.
SKU: L18 -
-
Hot Rod Indicators, Relays & Flashers
80 AMP High AMP Circuit or Ignition Switch “Relief” Relay (Accessory Feed) (L07-80)
Hot Rod Indicators, Relays & Flashers80 AMP High AMP Circuit or Ignition Switch “Relief” Relay (Accessory Feed) (L07-80)
Do you realize that the best ignition switches are rated for 30 amps and some for only 15 amps??? And how many amps of accessories are you using? This relay can give a full 80 amps of accessory power and take the load off the ignition switch. Simple hookup (with ring terminals for aftermarket type switches), 10 gauge wire feeds and connectors. Terrific instructions. Also great as a headlight switch relief relay or for any application that you need 80 amps of switching power.
SKU: L07-80
