Glove Box Switch L48
$8.00
| Weight | 0.00000000 lbs |
|---|---|
| Dimensions | 0.00000000 × 0.00000000 × 0.00000000 cm |
You may also like…
-
Hot Rod Ignition Switch Systems
Hot Rod Push Button Starter Switch Kit
Push our Ignition Switch button once and your accessory circuit comes on. A second push and hold engages the starter. When your engine starts just release the switch and your running as well as the LED indicator ring. Press it once more and everything turns off. This gorgeous Stainless steel (22MM) switch mounts in a 7/8″ diameter hole with the overall size of 1′. The compact ignition module can hide under your dash or in the engine bay.
This kit will work with our smaller (16MM) momentary push button but be warned guys; you’ll be using your pinky.
Compare our price to any other Single Switch Ignition System anywhere! We were the first to bring this system to the street rod market and we know how to do it best!
Check out our full line of matching low profile, push button switches and indicator lights.
Note this unit requires securing your car. Check out our battery disconnects or simply install a hidden kill switch or, look at our RFID unit.
SKU: 12*** -
Hot Rod Ignition Security Systems
RFID Ignition Security Unit
This all new StreetWorks RFID is designed to work with your Hot Dot Ignition Systems or your existing key. This is the security system that your hot rod has been missing.
As you may already know the “HOT DOT” ignition takes the place of your conventional “keyed” ignition switch however it has no security built in. This all new RFID Security system gives you the security and convenience that today’s society demands.
What is RFID?
RFID stands for Radio-Frequency Identification. The acronym refers to small electronic devices that consist of a small chip and an antenna. The RFID device serves the same purpose as magnetic strip on the back of a credit card; it provides a unique identifier for that object. And, just as a magnetic strip must be scanned to get the information, the RFID device must be scanned to retrieve the identifying information.
The RFID unit has 3 different operating modes.
Mode 1: High security mode. The car only starts and stays running with the RFID fob in range.
Mode 2: Medium security mode. The RFID fob must be in range for car to start and will stay running until the operator turns it off, then it won’t restart.
Mode 3: NO security mode. Should your fob become lost or damaged you can over-ride the system by entering a code with the hidden button switch.
The RFID is capable of working between 5 and 200 feet with the vehicle’s windows closed. If the vehicle’s windows are open we do not have a measurement for how far away the unit will work. There are 8 increments of sensitivity that the unit can be programmed to.
SKU: WI-RFID
Related products
-
Custom Switches for Hot Rods
Manual Cancelling L75 Turn Kit (L75TS-XX)
Get our beautiful L75 series switches in a Manual-Canceling Turn Signal Switch Kit. They have built-in ring LED’s. Specify LED color: blue, green, red or white and switch color: chrome or black casings. Good looking switches control 40 amp brake light override circuitry to let you use a single brake/turn bulb (such as an 1157 bulb). Mount in the dash or console. Wire leads, instructions and schematic. (Uses a single two-prong flasher, not provided.) Now with our new compact Turn Signal Module – just 1-1/2″ square X 7/8″ high.
SKU: L75TS-XX -
Custom Switches for Hot Rods
Universal Self-Canceling Turn Signal Kit
Our L10R and L10S switches with or without LED’s. Beautiful switches with an adjustable (1 – 45 second) timed shut-off. Switch(es), timing module, relay pack and instructions. Now with our new compact Turn Signal Module – just 1-1/2″ square X 7/8″ high.
SKU: L10R/S-PBSC/PBLSC -
Custom Switches for Hot Rods
GT3 Custom Toggle Switches (No Dividers)
The modular design of the switch face lets us build you a custom switch panel to control just about anything. Whether you want a single switch to turn on a dome light or a bank of 20 to run everything in the car we can do it.
The switches are all machined from billet aluminum and have a brushed finish. The actual switch can be either momentary-off-momentary or on-off-on. All switches are rated at 5 amps so you may want relays for heavy loads. (see page 39) Want lights? We can add 1 or 2 lights to each switch in your choice of colors. The switch panels are 1 3/4” tall. A single switch is 1 5/8” long. Each additional switch adds 1 1/8”. (for example a 6 switch panel is 7 3/8” long) The toggle is 5/8” tall.
The GT4D series include the dividers to safeguard those important circuits from accidentally being switched. The GT3 series are without dividers. GT2 switches are “stubby” rockers without dividers. We can mix the 3 on a single panel.
Don’t know if you have Polarity reversing Motors? See the Product Instructions Tab to determine if your motors are Polarity reversing or Non-Polarity reversing.
We have shown pricing here for 1 to 7 switches. We can build longer panels, just call us for a quote.
Want lights? We have them in green, red, amber and blue. Add $7.00 for each light. Be sure to tell us how you want the lights to function. We can wire up exactly what you need. If you want some dividers but not on every switch give us call and will price it for you. Once again, don’t forget your relays. We have polarity reversing, latching, single pole units to help keep your circuits safe.
SKU: GT3
