These are our large stainless steel drop-in illuminated LED cup holders. These cup holders measure 4.25″ dia.ย by 2″ deep with a 4โ flange. ย These are available in your choice of Amber, Blue, Green, Red or White.
Illuminated Stainless Steel Large Cup Holders (43021#)
These are our large stainless steel drop-in illuminated LED cup holders. These cup holders measure 4.25″ dia.ย by 2″ deep with a 4โ flange. ย These are available in your choice of Amber, Blue, Green, Red or White.
$68.00
Weight | 0.00000000 lbs |
---|---|
Dimensions | 0.00000000 × 0.00000000 × 0.00000000 cm |
Color | Blue Pair, Amber Pair, White Pair, Red Pair, Green Pair |
You may also like…
-
Hot Rod Ignition Security Systems
RFID Ignition Security Unit
This all new StreetWorks RFID is designed to work with your Hot Dot Ignition Systems or your existing key. ย This is the security system that your hot rod has been missing.
As you may already know the โHOT DOTโ ignition takes the place of your conventional โkeyedโ ignition switch however it has no security built in.ย This all new RFID Security system gives you the security and convenience that today’s society demands.
What is RFID?ย
RFID stands forย Radio-Frequency Identification. The acronym refers to small electronic devices that consist of a small chip and an antenna.ย The RFID device serves the same purpose as magnetic strip on the back of a credit card; it provides a unique identifier for that object. And, just as a magnetic strip must be scanned to get the information, the RFID device must be scanned to retrieve the identifying information.
The RFID unit has 3 different operating modes.
Mode 1:ย High security mode. The car only starts and stays running with the RFID fob in range.
Mode 2:ย Medium security mode. The RFID fob must be in range for car to start and will stay running until the operator turns it off, then it wonโt restart.
Mode 3:ย NO security mode. Should your fob become lost or damaged you can over-ride the system by entering a code with the hidden button switch.
The RFID is capable of working between 5 and 200 feet with the vehicleโs windows closed.ย If the vehicleโs windows are open we do not have a measurement for how far away the unit will work. ย There are 8 increments of sensitivity that the unit can be programmed to.
SKU: WI-RFID -
Hot Rod & Automotive Interior Display Trim
Dual Port USB charger / Volt Meter with Polished Aluminum Face (IT-USBP)
Hot Rod & Automotive Interior Display TrimDual Port USB charger / Volt Meter with Polished Aluminum Face (IT-USBP)
This is our beautiful brushed Billet USB Charger and Volt Meter with a polished aluminum face. It will charge 2 phones or other devices while you’re on the road. It measures 1 ยพโ dia. face, 2 ยฝโ deep, and fits in a 1 ยฝโ hole. This handy unit also checks the vehicleโs voltage.
The LED Display shows the power/charging status of the device(s) plugged into it. Both ports are high output ports. Capable of pushing 2.4 amps per port and has the typical USB charger of 5.0 volts.
Product comes with wires, mounting bracket and screws and, instructions.
SKU: IT-USBP