Manual Cancelling L75 Turn Kit (L75TS-XX)
Get our beautiful L75 series switches in a Manual-Canceling Turn Signal Switch Kit. They have built-in ring LED’s. Specify LED color: blue, green, red or white and switch color: chrome or black casings. Good looking switches control 40 amp brake light override circuitry to let you use a single brake/turn bulb (such as an 1157 bulb). Mount in the dash or console. Wire leads, instructions and schematic. (Uses a single two-prong flasher, not provided.) Now with our new compact Turn Signal Module – just 1-1/2″ square X 7/8″ high.
$139.00
Get our beautiful L75 series switches in a Manual-Canceling Turn Signal Switch Kit. They have built-in ring LED’s. Specify LED color: blue, green, red or white and switch color: chrome or black casings. Good looking switches control 40 amp brake light override circuitry to let you use a single brake/turn bulb (such as an 1157 bulb). Mount in the dash or console. Wire leads, instructions and schematic. (Uses a single two-prong flasher, not provided.) Now with our new compact Turn Signal Module – just 1-1/2″ square X 7/8″ high.
When ordering Black Switches you will receive a black plate.
| Weight | 0.00000000 lbs |
|---|---|
| Dimensions | 0.00000000 × 0.00000000 × 0.00000000 cm |
| Switch Type | Black Switch , Green Light, Black Switch , Blue Light, Black Switch, White Light, Black Switch, Red Light, Chrome Switch, Blue Light, Chrome Switch, Green Light, Chrome Switch, White Light, Chrome Switch, Red Light |
| Switch Size | 16mm, 22mm |
You may also like…
-
Hot Rod Ignition Security Systems
RFID Ignition Security Unit
This all new StreetWorks RFID is designed to work with your Hot Dot Ignition Systems or your existing key. This is the security system that your hot rod has been missing.
As you may already know the “HOT DOT” ignition takes the place of your conventional “keyed” ignition switch however it has no security built in. This all new RFID Security system gives you the security and convenience that today’s society demands.
What is RFID?
RFID stands for Radio-Frequency Identification. The acronym refers to small electronic devices that consist of a small chip and an antenna. The RFID device serves the same purpose as magnetic strip on the back of a credit card; it provides a unique identifier for that object. And, just as a magnetic strip must be scanned to get the information, the RFID device must be scanned to retrieve the identifying information.
The RFID unit has 3 different operating modes.
Mode 1: High security mode. The car only starts and stays running with the RFID fob in range.
Mode 2: Medium security mode. The RFID fob must be in range for car to start and will stay running until the operator turns it off, then it won’t restart.
Mode 3: NO security mode. Should your fob become lost or damaged you can over-ride the system by entering a code with the hidden button switch.
The RFID is capable of working between 5 and 200 feet with the vehicle’s windows closed. If the vehicle’s windows are open we do not have a measurement for how far away the unit will work. There are 8 increments of sensitivity that the unit can be programmed to.
SKU: WI-RFID -
Hot Rod Ignition Switch Systems
Hot Rod Push Button Starter Switch Kit
Push our Ignition Switch button once and your accessory circuit comes on. A second push and hold engages the starter. When your engine starts just release the switch and your running as well as the LED indicator ring. Press it once more and everything turns off. This gorgeous Stainless steel (22MM) switch mounts in a 7/8″ diameter hole with the overall size of 1′. The compact ignition module can hide under your dash or in the engine bay.
This kit will work with our smaller (16MM) momentary push button but be warned guys; you’ll be using your pinky.
Compare our price to any other Single Switch Ignition System anywhere! We were the first to bring this system to the street rod market and we know how to do it best!
Check out our full line of matching low profile, push button switches and indicator lights.
Note this unit requires securing your car. Check out our battery disconnects or simply install a hidden kill switch or, look at our RFID unit.
SKU: 12***
Related products
-
Custom Switches for Hot Rods
On-Off Pull Switch (L-PS)
Pull On, Push Off. This ain’t rocket science, but it’s a nice little switch. Rated 20 amps. Fits through a 1/2″ Dia. hole. Comes with a black knob,and a chrome trim rig/nut. Use any of our 10-32 dress-up knob fit for a better look Also available is a billet trim ring.
SKU: L-PS -
Custom Switches for Hot Rods
2 speed plus intermittent wiper Kit Specialty Power Windows (67022)
This flex shaft (cable) wiper system is a great solution for Street Rods and customs being built. This universal Dual-Wiper Drive Kit has two wiper shafts that will accept arms that fit 1/2 inch fine spline knurls or arms that fit 1/4 inch shafts. The output shafts are driven by a remote mounted commercial duty 2 speed wiper motor.
This motor has 300 in. lbs. stall torque. The sweep is adjustable from 90 degrees to 160 degrees in 10 degree increments. (Both wipers will sweep the same amount). This dual wiper kit has 2-speed intermittent self-park switch. included and will accept many of our knobs.
This kit is best SUITED FOR CARS UNDER CONSTRUCTION. Some applications will require modifications to the original wiper shaft holes. Comes with written and video instructions. (Kits Do Not Include Arms and Blades) Standard kits come with a 72″ drive cable.
SKU: 67022 -
Custom Switches for Hot Rods
Replacement Volkswagen Ignition Switch (V-IS)
If you’re rewiring your VW and adding accessory circuits you need a new ignition switch that has that feature. Oh, yes. And it would be nice if it fit into the original dash hole…AND if it would clear the ash tray brackets. This is a four position switch (Accessory, Off, On, Start) with a 3/4″ shank, two keys and includes ring terminals for the outputs.
SKU: V-IS -
Specialty Flashers & Relays
Headlight Reminder Buzzer (32021)
There is nothing as embarrassing to a car guy as a dead battery because you left your lights on. This kit sounds our new Buzzer and the center lights red reminding you your lights are on but the key is either out of the ignition or in the off position. The kit includes the Buzzer, Module, and wiring instructions. Mounts in a 3/4″ hole and the chrome bezel is 7/8″
SKU: 32021
