LED Mechanical Flasher (WI-02)
We have found a less expensive alternative to our current solid state flasher. ย This flasher functions within the same amperage and life expectations of our solid state version. ย An added benefit to the mechanical flasher is that it makes the “clicking” sound we are all accustomed to when our turn signals are on. ย ย This flasher works from as little as 20ma up to 25 amps max. load. ย This is a round 2 prong flasher that is a direct fit to your current panel. ย These relays have an additional wire coming out of the top where they must be grounded. ย Round, 1 3/8″ dia. ย X 1 3/8″ tall.
$25.00
We have found a less expensive alternative to our current solid state flasher. ย This flasher functions within the same amperage and life expectations of our solid state version. ย An added benefit to the mechanical flasher is that it makes the “clicking” sound we are all accustomed to when our turn signals are on. ย ย This flasher works from as little as 20ma up to 25 amps max. load. ย This is a round 2 prong flasher that is a direct fit to your current panel. ย These relays have an additional wire coming out of the top where they must be grounded. ย Round, 1 3/8″ dia. ย X 1 3/8″ tall.
| Weight | 0.00000000 lbs |
|---|---|
| Dimensions | 0.00000000 × 0.00000000 × 0.00000000 cm |
You may also like…
-
Hot Rod Ignition Switch Systems
Hot Rod Push Button Start Ignition Switch
Push our Ignition Switch button once and your accessory circuit comes on. A second push and hold engages the starter. When your engine starts just release the switch and your running as well as the LED indicator ring. Press it once more and everything turns off. This gorgeous Stainless steel (22MM) switch mounts in a 7/8″ diameter hole with the overall size of 1′.ย ย The compact ignition module can hide under your dash or in the engine bay.
This kit will work with our smaller (16MM) momentary push button but be warned guys; youโll be using your pinky.
Compare our price to any other Single Switch Ignition System anywhere! We were the first to bring this system to the street rod market and we know how to do it best!
Check out our full line of matching low profile, push button switches and indicator lights.
Note this unit requires securing your car. Check out our battery disconnects or simply install a hidden kill switch or, look at ourย RFID unit.
SKU: 12*** -
Hot Rod Ignition Security Systems
RFID Ignition Security Unit
This all new StreetWorks RFID is designed to work with your Hot Dot Ignition Systems or your existing key. ย This is the security system that your hot rod has been missing.
As you may already know the โHOT DOTโ ignition takes the place of your conventional โkeyedโ ignition switch however it has no security built in.ย This all new RFID Security system gives you the security and convenience that today’s society demands.
What is RFID?ย
RFID stands forย Radio-Frequency Identification. The acronym refers to small electronic devices that consist of a small chip and an antenna.ย The RFID device serves the same purpose as magnetic strip on the back of a credit card; it provides a unique identifier for that object. And, just as a magnetic strip must be scanned to get the information, the RFID device must be scanned to retrieve the identifying information.
The RFID unit has 3 different operating modes.
Mode 1:ย High security mode. The car only starts and stays running with the RFID fob in range.
Mode 2:ย Medium security mode. The RFID fob must be in range for car to start and will stay running until the operator turns it off, then it wonโt restart.
Mode 3:ย NO security mode. Should your fob become lost or damaged you can over-ride the system by entering a code with the hidden button switch.
The RFID is capable of working between 5 and 200 feet with the vehicleโs windows closed.ย If the vehicleโs windows are open we do not have a measurement for how far away the unit will work. ย There are 8 increments of sensitivity that the unit can be programmed to.
SKU: WI-RFID
Related products
-
Hot Rod Wiring Products
85 Amp Diode (L-85A-DIODE)
Here’s a real problem solver – from StreetWorks, of course. An 85 amp diode to prevent back streaming in a high-amperage circuit such as a radiator fan, tuner amplifier or any other circuit that you want to be fully isolated. Comes with 10 ga wire leads and butt connectors for easy in-line installation. Only 2/10ths of a volt drop across the diode to allow maximum forward voltage….. What a great idea!
SKU: L-85A-DIODE -
-
Hot Rod Wiring Products
H4 Headlight Harnesses (EL-HLP)
Are yourย 3 prong headlight haresses tired and falling apart?ย Pick up a pair of new harnesses with connectors and make sure you never lose your lights at night.ย Comes with 2 3 prong harnesses pre-wired with pigtails, connectors and instructions.
SKU: EL-HLP
