Hot Slot Auxilary LED Tail Light & Turn Signal Kit
Your choice of Amber or Red LED’s.
Our kit features (2) – 4 Super Bright LED units with diffuser lenses that mount inside aluminum housings, included. 1/2″ thick build-in, flush mounted clear acrylic lenses to fit into slightly curved fenders for a seamless look. (The acrylic lenses can not be bent. The acrylic is body worked to be flush with the fender surface.) The lenses are only 1/2″ wide by 1-3/4″ long! Kit includes dual intensity convertors to give park lights and turn signals. Need only 1″ of clearance space behind the mounting surface. Weld-in or glass-in studs for mounting are included. Quality instructions. Really cool stuff!
$110.00
-
Hot Rod Exterior Lighting
Hot Slot Auxilary LED Tail Light & Turn Signal Kit
Your choice of Amber or Red LED’s.
Our kit features (2) – 4 Super Bright LED units with diffuser lenses that mount inside aluminum housings, included. 1/2″ thick build-in, flush mounted clear acrylic lenses to fit into slightly curved fenders for a seamless look. (The acrylic lenses can not be bent. The acrylic is body worked to be flush with the fender surface.) The lenses are only 1/2″ wide by 1-3/4″ long! Kit includes dual intensity convertors to give park lights and turn signals. Need only 1″ of clearance space behind the mounting surface. Weld-in or glass-in studs for mounting are included. Quality instructions. Really cool stuff!
SKU: L63#
Your choice of Amber or Red LED’s.
Our kit features (2) – 4 Super Bright LED units with diffuser lenses that mount inside aluminum housings, included. 1/2″ thick build-in, flush mounted clear acrylic lenses to fit into slightly curved fenders for a seamless look. (The acrylic lenses can not be bent. The acrylic is body worked to be flush with the fender surface.) The lenses are only 1/2″ wide by 1-3/4″ long! Kit includes dual intensity convertors to give park lights and turn signals. Need only 1″ of clearance space behind the mounting surface. Weld-in or glass-in studs for mounting are included. Quality instructions. Really cool stuff!
| Weight | 0.00000000 lbs |
|---|---|
| Dimensions | 0.00000000 × 0.00000000 × 0.00000000 cm |
| Color | Amber, Red |
You may also like…
-
Hot Rod Ignition Security Systems
RFID Ignition Security Unit
This all new StreetWorks RFID is designed to work with your Hot Dot Ignition Systems or your existing key. ย This is the security system that your hot rod has been missing.
As you may already know the โHOT DOTโ ignition takes the place of your conventional โkeyedโ ignition switch however it has no security built in.ย This all new RFID Security system gives you the security and convenience that today’s society demands.
What is RFID?ย
RFID stands forย Radio-Frequency Identification. The acronym refers to small electronic devices that consist of a small chip and an antenna.ย The RFID device serves the same purpose as magnetic strip on the back of a credit card; it provides a unique identifier for that object. And, just as a magnetic strip must be scanned to get the information, the RFID device must be scanned to retrieve the identifying information.
The RFID unit has 3 different operating modes.
Mode 1:ย High security mode. The car only starts and stays running with the RFID fob in range.
Mode 2:ย Medium security mode. The RFID fob must be in range for car to start and will stay running until the operator turns it off, then it wonโt restart.
Mode 3:ย NO security mode. Should your fob become lost or damaged you can over-ride the system by entering a code with the hidden button switch.
The RFID is capable of working between 5 and 200 feet with the vehicleโs windows closed.ย If the vehicleโs windows are open we do not have a measurement for how far away the unit will work. ย There are 8 increments of sensitivity that the unit can be programmed to.
SKU: WI-RFID -
Hot Rod Ignition Switch Systems
Hot Rod Push Button Starter Switch Kit
Push our Ignition Switch button once and your accessory circuit comes on. A second push and hold engages the starter. When your engine starts just release the switch and your running as well as the LED indicator ring. Press it once more and everything turns off. This gorgeous Stainless steel (22MM) switch mounts in a 7/8″ diameter hole with the overall size of 1′.ย ย The compact ignition module can hide under your dash or in the engine bay.
This kit will work with our smaller (16MM) momentary push button but be warned guys; youโll be using your pinky.
Compare our price to any other Single Switch Ignition System anywhere! We were the first to bring this system to the street rod market and we know how to do it best!
Check out our full line of matching low profile, push button switches and indicator lights.
Note this unit requires securing your car. Check out our battery disconnects or simply install a hidden kill switch or, look at ourย RFID unit.
SKU: 12***
Related products
-
-
Hot Rod Exterior Lighting
Brakelighter 12 Volt 3rd Brake Light (65515)
Now you can feel safe knowing the cars behind you will see your brake lights. This slick little unit attaches to the inside of your rear window. For easy removal when youโre at aย judged show attach the light with the included suction cups. For a more permanent installation double sided tape is also included.ย The light is divided into 3 sections, letting you use it for turn signals as well as brake lights. Works with either positive or negative ground vehicles. Instructions included. This light is 12 โ long , 5/8โ tall & 7/8โ deep.
SKU: 65515 -
Hot Rod Exterior Lighting
Billet Frames for L58SM Series LED Lights (L58SM-FR)
If you aren’t into flush mounting taillight or 3rd brake light lenses into the body, these stunning machined billet aluminum frames work with our L58SM kits to allow you to surface mount the lens on the outside of the sheet metal while the LED’s and housing attach to the inside. The small L58SM Frame is 9″ long X just under 1″ wide. It will protrude .400″ off the surface. They accept our lenses perfectly (as shown). All other parts (lens, LED’s, housing, etc) are in the flush mount kits, just add these frames for flat surface mount installation. 3rd Brake Light kits need one frame, Taillight Kits need two frames.
SKU: L58SM-FR -
Custom Marker Lights, Hot Rod Exterior Lighting
6-LED Interior and Marker Lights, L96 Series
Great little 6-LED lights have a variety of uses. They are 1-13/16โ diameter overall and mount in a 1-3/8โ diameter hole. Red and ambers are SAE/DOT rated as clearance lights. Provided with an optional stainless steel trim ring.
SKU: L96
