Mini-Rocker Switch (L55)
A sweet little jet black rocker switch with different versions to give you lots of options. The switch measures just 19/32″ x 13/16″ and is rated 5 amps max. except as noted.
Space doesn’t allow us to list all the possible things that we can do with these switches but if you can think it, we can probably do it, including … power window switch, power door locks, power trunk lift, turn signals, self-canceling turn signals, headlight – park lights, etc. Or just add one of our 40 amp relays to increase the circuit switching amperage.
$12.00
A sweet little jet black rocker switch with different versions to give you lots of options. The switch measures just 19/32″ x 13/16″ and is rated 5 amps max. except as noted.
Space doesn’t allow us to list all the possible things that we can do with these switches but if you can think it, we can probably do it, including … power window switch, power door locks, power trunk lift, turn signals, self-canceling turn signals, headlight – park lights, etc. Or just add one of our 40 amp relays to increase the circuit switching amperage.
| Weight | 0.00000000 lbs |
|---|---|
| Dimensions | 0.00000000 × 0.00000000 × 0.00000000 cm |
| Switch Type | ON-OFF (10 amps), ON-OFF Momentary, ON-OFF-ON (with Center Off), ON-OFF-ON (Mom. Center Off) |
You may also like…
-
Hot Rod Ignition Security Systems
RFID Ignition Security Unit
This all new StreetWorks RFID is designed to work with your Hot Dot Ignition Systems or your existing key. This is the security system that your hot rod has been missing.
As you may already know the “HOT DOT” ignition takes the place of your conventional “keyed” ignition switch however it has no security built in. This all new RFID Security system gives you the security and convenience that today’s society demands.
What is RFID?
RFID stands for Radio-Frequency Identification. The acronym refers to small electronic devices that consist of a small chip and an antenna. The RFID device serves the same purpose as magnetic strip on the back of a credit card; it provides a unique identifier for that object. And, just as a magnetic strip must be scanned to get the information, the RFID device must be scanned to retrieve the identifying information.
The RFID unit has 3 different operating modes.
Mode 1: High security mode. The car only starts and stays running with the RFID fob in range.
Mode 2: Medium security mode. The RFID fob must be in range for car to start and will stay running until the operator turns it off, then it won’t restart.
Mode 3: NO security mode. Should your fob become lost or damaged you can over-ride the system by entering a code with the hidden button switch.
The RFID is capable of working between 5 and 200 feet with the vehicle’s windows closed. If the vehicle’s windows are open we do not have a measurement for how far away the unit will work. There are 8 increments of sensitivity that the unit can be programmed to.
SKU: WI-RFID -
Hot Rod Ignition Switch Systems
Hot Rod Push Button Starter Switch Kit
Push our Ignition Switch button once and your accessory circuit comes on. A second push and hold engages the starter. When your engine starts just release the switch and your running as well as the LED indicator ring. Press it once more and everything turns off. This gorgeous Stainless steel (22MM) switch mounts in a 7/8″ diameter hole with the overall size of 1′. The compact ignition module can hide under your dash or in the engine bay.
This kit will work with our smaller (16MM) momentary push button but be warned guys; you’ll be using your pinky.
Compare our price to any other Single Switch Ignition System anywhere! We were the first to bring this system to the street rod market and we know how to do it best!
Check out our full line of matching low profile, push button switches and indicator lights.
Note this unit requires securing your car. Check out our battery disconnects or simply install a hidden kill switch or, look at our RFID unit.
SKU: 12***
Related products
-
Automotive Switches and Buttons
L75-22 Series Switch Billet Face Plate
THESE ARE FACE PLATES ONLY. MUST ORDER THE SWITCHES SEPARATELY
Show off our L75-22 series switches (switches sold separately) – put an Ignition switch and an Accessory switch side-by-side or do a multiple of switching functions. The plates are 1-1/4″” wide and secures with the switch nuts.
We can do almost anything that you want to with these switches. Give us a call to discuss your needs.
SKU: L75-22FP -
Custom Hot Rod Switch Panels, Hot Rod Power Window Switches
4-Door Hot Rod Paddle Rocker Power Window Switch Kit
Custom Hot Rod Switch Panels, Hot Rod Power Window Switches4-Door Hot Rod Paddle Rocker Power Window Switch Kit
Beautiful billet 3 wire power window switches now in kits for 4-door cars. Comes with paddle rockers.
Kit includes: 4 switch panel for the driver’s door and 3 single switch panels for each of the other doors. Includes polarity reversing modules, wiring connectors switches and panels with instructions.
Don’t know if you have Polarity reversing Motors? See the Product Instructions Tab to determine if your motors are Polarity reversing or Non-Polarity reversing.
SKU: L39BO4DRP -
Hot Rod Power Window Switches
Oval Power Window / Door Lock Switch Kit with Dimpled rockers (L39BOTDL)
Hot Rod Power Window SwitchesOval Power Window / Door Lock Switch Kit with Dimpled rockers (L39BOTDL)
This new kit gives you a 3 switch panel for the drivers side so you can control your Driver’s and Passenger windows along with door locks. You will also receive a 2 switch panel for the passenger side that has the ability to control the passenger window and door locks.
This kit includes the necessary crossover wiring, polarity reversing modules, connectors and instructions.
SKU: L39BOTDL -
