Wiper Switch (L-WS)
A quality aftermarket windshield wiper switch, “two speed, three position – Off, Low and High. Universal symbol plastic knob, park terminal, 3/16″ shaft. Use any of our 3/16” Dress-Up Knobs with this switch.
$29.00
A quality aftermarket windshield wiper switch, “two speed, three position – Off, Low and High. Universal symbol plastic knob, park terminal, 3/16″ shaft. Use any of our 3/16” Dress-Up Knobs with this switch.
| Weight | 0.00000000 lbs |
|---|---|
| Dimensions | 0.00000000 × 0.00000000 × 0.00000000 cm |
You may also like…
-
Hot Rod Ignition Switch Systems
Hot Rod Push Button Starter Switch Kit
Push our Ignition Switch button once and your accessory circuit comes on. A second push and hold engages the starter. When your engine starts just release the switch and your running as well as the LED indicator ring. Press it once more and everything turns off. This gorgeous Stainless steel (22MM) switch mounts in a 7/8″ diameter hole with the overall size of 1′.ย ย The compact ignition module can hide under your dash or in the engine bay.
This kit will work with our smaller (16MM) momentary push button but be warned guys; youโll be using your pinky.
Compare our price to any other Single Switch Ignition System anywhere! We were the first to bring this system to the street rod market and we know how to do it best!
Check out our full line of matching low profile, push button switches and indicator lights.
Note this unit requires securing your car. Check out our battery disconnects or simply install a hidden kill switch or, look at ourย RFID unit.
SKU: 12*** -
Hot Rod Ignition Security Systems
RFID Ignition Security Unit
This all new StreetWorks RFID is designed to work with your Hot Dot Ignition Systems or your existing key. ย This is the security system that your hot rod has been missing.
As you may already know the โHOT DOTโ ignition takes the place of your conventional โkeyedโ ignition switch however it has no security built in.ย This all new RFID Security system gives you the security and convenience that today’s society demands.
What is RFID?ย
RFID stands forย Radio-Frequency Identification. The acronym refers to small electronic devices that consist of a small chip and an antenna.ย The RFID device serves the same purpose as magnetic strip on the back of a credit card; it provides a unique identifier for that object. And, just as a magnetic strip must be scanned to get the information, the RFID device must be scanned to retrieve the identifying information.
The RFID unit has 3 different operating modes.
Mode 1:ย High security mode. The car only starts and stays running with the RFID fob in range.
Mode 2:ย Medium security mode. The RFID fob must be in range for car to start and will stay running until the operator turns it off, then it wonโt restart.
Mode 3:ย NO security mode. Should your fob become lost or damaged you can over-ride the system by entering a code with the hidden button switch.
The RFID is capable of working between 5 and 200 feet with the vehicleโs windows closed.ย If the vehicleโs windows are open we do not have a measurement for how far away the unit will work. ย There are 8 increments of sensitivity that the unit can be programmed to.
SKU: WI-RFID -
Custom Switches for Hot Rods
2 speed plus intermittent wiper Kit Specialty Power Windows (67022)
This flex shaft (cable) wiper system is a great solution for Street Rods and customs being built.ย This universal Dual-Wiper Drive Kit has two wiper shafts that will accept arms that fit 1/2 inch fine spline knurls or arms that fit 1/4 inch shafts. The output shafts are driven by a remote mounted commercial duty 2 speed wiper motor.
This motor has 300 in. lbs. stall torque. The sweep is adjustable from 90 degrees to 160 degrees in 10 degree increments. (Both wipers will sweep the same amount). This dual wiper kit has 2-speed intermittent self-park switch. ย included and will accept many of our knobs.
This kit is best SUITED FOR CARS UNDER CONSTRUCTION. Some applications will require modifications to the original wiper shaft holes. Comes with written and video instructions. (Kits Do Not Include Arms and Blades) Standard kits come with a 72″ drive cable.
SKU: 67022
Related products
-
Custom Switches for Hot Rods
Self Canceling Turn Signal Toggle Switch (L10-TSC)
Metal Toggle Switch, 7/8โ long for right or left turn indication, center off. Beautiful switches with an adjustable (1 – 45 second) timed shut-off. Switch(es), timing module, relay pack and instructions. Now with our new compact Turn Signal Module – just 1-1/2″ square X 7/8″ high. (bottom right in photo)
SKU: L10-TSC -
Custom Switches for Hot Rods
Column Turn Lever Switch (L43)
Polished Aluminum Knob and Stainless Steel Arm with Chrome Switch Bezel and Black Button. Fits GM & other columns with single screw through flat end. S/S screw included.
This beautiful Turn Signal Lever also contains a REAL ON/OFF switch. Sold with or without a 40 amp relay.
SKU: L43 -
Custom Switches for Hot Rods
Contemporary Turn Lever Switch (L43G)
Polished Aluminum Knob with Black O-Ring and Stainless Steel Arm with Chrome Switch Bezel and Black Button. Fits GM & other columns with single srew through flat ends. S/S screw included. (Will not replace units that originally had wiper or cruise controls.)
This beautiful Turn Signal Lever also contains a REAL ON/OFF switch. Sold with or without a 40 amp relay. And for HI/LO Beam dimming, our Turn Lever unit comes with a quality, 40 amp automotive grade SPDT relay. Works for any ON/ON switching.
SKU: L43G -
Custom Switches for Hot Rods
The Best Brake Switch (L08)
We call it that because our customers say it’s the best. This adjustable, mechanical switch helps you by getting rid of those undependable hydraulic pressure switches that burn out every year (or more often!). This switch will last because it uses self-cleaning contacts to prevent the carbon build-up that destroys hydraulic switches. Its adjustable design allows it to fit most pre-1960 vehicles, customs and many other later models with through-the-floor brake pedals, no additional brackets needed. And it’s waterproof. Stainless hardware, connectors and instructions included.
SKU: L08
