Hot Rod Lighting
Showing 1–20 of 80 results
Let your souped-up ride shine inside and out with hot rod lighting from Watson’s StreetWorks. We carry LED headlights, taillights, interior marker lights and their replacements, so should any of them ever burn out, you know exactly where to go to fix the problem. No matter your hot rod lighting needs, you can find the interior and exterior custom car lights to suit them perfectly in our extensive selection.
-
Car Interior LED Lights, Courtesy Lights
LED Oval Interior Hot Rod Dome Light With Radius Bezel (TQ-OIL)
Car Interior LED Lights, Courtesy LightsLED Oval Interior Hot Rod Dome Light With Radius Bezel (TQ-OIL)
Trique’s Oval Interior Light is machined from a solid piece of billet aluminum and houses (6) 5mm cool white L.E.D’s behind a dome shaped lens. Each interior light comes fully polished. This interior light features a radius bezel to match many of our other interior components. Comes with the mounting bracket.
- Billet Aluminum
- LED Light
- Soft white light versus dingy yellow light
- Comes with mounting bracket
- Made in the USA
Dimensions:
- Footprint = 4.25″ X 1.75″
- Bezel = 5.25″ X 2.125″
- Required depth = .55″
SKU: TQ-OIL* -
Car Interior LED Lights
LED Interior Light with Switch (L85)
A sweet little LED Interior Light. The lens measures just 7/8″ x 3″ and when you rotate the lens either way, the light turns on. It can also be externally switched. Install with the oval mounting flange showing (it’s 2-1/16″ x 5″) or hide it behind the mounting surface with just the lens showing. Needs about 1-1/4″ rear clearance. Screws included. Comes with a chrome bezel that covers the black plastic shown in the picture.
SKU: L85 -
Car Interior LED Lights
Switched Dome Light (L82)
A modern car feature for your favorite ride NOW IN LED. This attractive dome light has a switch built right into the lens. Convenient size is just 4-1/2″ X 2-1/2″, snaps into place – a hole template is provided. Bulbs and 24″ pre-wired leads included. Tan colored plastic housing fits into most interior motifs. In this photo, the switch is at the right hand end of the lens.
SKU: L82 -
Hot Rod Exterior Lighting, LED Hot Rod Headlights
LED Headlights (251##)
NSRA SAFETY PRODUCT OF THE YEAR 2014
NSRA NEW PRODUCT OF THE YEAR 2014
At every show we attended in 2013 people asked when we would carry LED headlights. We found an excellent product but the lens just looked wrong in most Rods and they were expensive. So we kept looking. By late fall we had a solution that we were testing. We started with a 7″ round glass lens and mated it to an H4 LED. This worked well and the bulb put out a lot of light but it was scattered all over the place. Rather than rush to market we kept looking and it was worth the wait! Finally we found this H4 LED bulb that we are offering here. With a distinct difference between Hi & Lo beams the crisp white light pattern is the best we’ve seen from this configuration. They draw less amps that your old bulbs and plug into your 3 prong socket so you don’t need to upgrade your wiring. Each bulb has a power controller which is permanently attached to the bulb / fan assembly. We’re thrilled to offer this LED headlight package at a realistic price.
These new 7” round Hella Vision Plus lenses use an advanced reflector design and conform to SAE/DOT standards for street and highway use.
7″ Round headlights with H4 style LED bulbs. The lenses have the 3 positioning tabs to make aligning them a snap. From the retaining ring they are 4 1/4″ deep so be sure your buckets will accept the bulb-fan assembly. 25101 Sold in pairs
7″ x 6″ rectangle headlights with H4 style LED bulbs. The lenses should fit right into your existing frames. They are 5″ deep with the LED bulbs in place. 25112 Sold in Pairs
H4 LED bulbs only. Put them into your existing H4 Lenses. 25145 Sold in pairs.
WARNING: Headlight buckets that have springs in the center of the bucket may not be able to accomodate this LED setup without modifications or installing new buckets. These LED bulbs willl not fit King Bee Buckets, and may require some modifications to fit Dietz buckets. Tri-Five vehicles will need to extend their headlight buckets.
SKU: 251## -
Hot Rod Exterior Lighting, LED Hot Rod Headlights
7″ Round Replacement Hella Headlight Lens (25123)
These are the exact same Hella lenses we use in the Award Winning 7″ round LED headlight kits. These lenses conform to SAE/DOT standards for street and highway use. They are glass lenses and retain that original look, fit and function. They do not come with bulbs. The lenses accept a standard H4 style bulb.
SKU: 25123 -
Aftermarket Backup Lights for Hot Rods, Courtesy Lights, Hot Rod Exterior Lighting, LED Hot Rod Headlights
Rodders Light Upgrade Package (EL-RLP)
Aftermarket Backup Lights for Hot Rods, Courtesy Lights, Hot Rod Exterior Lighting, LED Hot Rod HeadlightsRodders Light Upgrade Package (EL-RLP)
For all you Rodders out there this is a light upgrade package that will add to the safety of your car.
EL-RLP Basic Rod Light Package Upgrade Kit
What You Get:
25101: 1 pair LED Headlights with 7″ round lenses
25012: 1 pair Red 1157 LED replacements for brake lights.
25024: 1 pair Amber 1157 LED replacements for turn signals.
L96WCL: 1 pair White LED backup lights.
EL-MB: 1 Micro Billet LED Third Brake Light.
WI-02: 1 Pair of electronic LED flashers.
Total retail price if you purchased everything separately: $508.00
Your price when you buy the light upgrade package: $379.00
That’s a total savings of $129.00
EL-RLPD Deluxe Cobra Light Upgrade Kit
What You Get:
25101: 1 pair LED Headlights with 7″ round lenses
25012: 1 pair Red 1157 LED replacements for brake lights.
25024: 1 pair Amber 1157 LED replacements for turn signals.
L63BW: 1 pair White flush mount LED backup lights.
EL-MB: 1 Micro Billet LED Third Brake Light.
WI-02: 1 Pair of electronic LED flashers.
L03: Trunk light kit with tilt switch and 1 2″ LED strip light.
L04G: Interior courtesy light kit with 2 jamb switches and 2 2″ LED strip lights.
EL-03E: Engine bay light kit includes 1 tilt switch and 3 8″ LED strip lights.
EL-DR: 12″ daytime running light with bracket.
Total retail price if you purchased everything separately: $777.00
Your price when you buy the light upgrade package: $549.00
That’s a total savings of $228.00
SKU: EL-RLP -
Aftermarket Backup Lights for Hot Rods, Courtesy Lights, Hot Rod Exterior Lighting
Cobra Light Upgrade Package (EL-CLP)
Aftermarket Backup Lights for Hot Rods, Courtesy Lights, Hot Rod Exterior LightingCobra Light Upgrade Package (EL-CLP)
For all you Cobra owners out there this is a light upgrade package that will add to the safety of your car.
EL-CLP Basic Cobra Light Package Upgrade Kit
What You Get:
25101: 1 pair LED Headlights with 7″ round lenses
25012: 2 pair Red 1157 LED replacements for brake lights.
25024: 1 pair Amber 1157 LED replacements for turn signals.
L96WCL: 1 pair White LED backup lights.
EL-MB: 1 Micro Billet LED Third Brake Light.
AM-02R: 1 Pair of electronic LED flashers.
Total retail price if you purchased everything separately: $553.00
Your price when you buy the light upgrade package: $419.00
That’s a total savings of $134.00
EL-CLPD Deluxe Cobra Light Upgrade Kit
What You Get:
25101: 1 pair LED Headlights with 7″ round lenses
25012: 2 pair Red 1157 LED replacements for brake lights.
25024: 1 pair Amber 1157 LED replacements for turn signals.
L63BW: 1 pair White flush mount LED backup lights.
EL-MB: 1 Micro Billet LED Third Brake Light.
AM-02R: 1 Pair of electronic LED flashers.
L03: Trunk light kit with tilt switch and 1 2″ LED strip light.
L04G: Interior courtesy light kit with 2 jamb switches and 2 2″ LED strip lights.
EL-03E: Engine bay light kit includes 1 tilt switch and 3 8″ LED strip lights.
EL-DR: 12″ daytime running light with bracket.
Total retail price if you purchased everything separately: $822.00
Your price when you buy the light upgrade package: $569.00
That’s a total savings of $253.00
SKU: EL-CLP -
Hot Rod Exterior Lighting
7″ Round Replacement Headlight Buckets (EL-HLB)
Replacement headlight buckets for your 7″ round headlights. These plastic buckets are intended to be used for either a new installation or to replace older rusted out headlight buckets. The chrome retaining ring, new 3 prong sockets and gaskets are included. They mount onto a flat vertical surface. Sold in pairs. A 6.5” dia. hole will be needed to accept the new bucket.
SKU: EL-HLB -
Hot Rod Exterior Lighting
5 3/4″ Round Replacement Headlight Lens (EL-HL5L)
These are the exact same lenses we use in the Award Winning 5 3/4″” round LED headlight kits. These lenses are DOT approved. They are glass lenses and retain that original look, fit and function. They do not come with bulbs. The lenses accept a standard H4 style bulb.
SKU: EL-HL5L -
Hot Rod Exterior Lighting
Billet Frames L58 Series LED Lights (L58-FR)
If you aren’t into flush mounting taillight or 3rd brake light lenses into the body, these stunning machined billet aluminum frames work with our L58 kits to allow you to surface mount the lens on the outside of the sheet metal while the LED’s and housing attach to the inside. The large L58 Frame is 16-3/4″ long X just under 1″ wide. It will protrude .400″ off the surface. They accept our lenses perfectly (as shown). All other parts (lens, LED’s, housing, etc) are in the flush mount kits, just add these frames for flat surface mount installation. 3rd Brake Light kits need one frame, Taillight Kits need two frames.
SKU: L58-FR -
Hot Rod Exterior Lighting
Billet Frames for L58SM Series LED Lights (L58SM-FR)
If you aren’t into flush mounting taillight or 3rd brake light lenses into the body, these stunning machined billet aluminum frames work with our L58SM kits to allow you to surface mount the lens on the outside of the sheet metal while the LED’s and housing attach to the inside. The small L58SM Frame is 9″ long X just under 1″ wide. It will protrude .400″ off the surface. They accept our lenses perfectly (as shown). All other parts (lens, LED’s, housing, etc) are in the flush mount kits, just add these frames for flat surface mount installation. 3rd Brake Light kits need one frame, Taillight Kits need two frames.
SKU: L58SM-FR -
Hot Rod Exterior Lighting, Hot Rod LED Brake Lights
Flush Mounted LED Tail Light Strip
For integral or separate Turn Signals! Each light is split 40-20 so that the LED’s can be wired for either type of turn signal. 60 Super Bright Red LED strips inside aluminum housings. 1/4″ thick build-in, flush mounted red acrylic lenses with prismatic diffusers – can be fit into slightly curved fenders, roll pans and pickup bed corners up to 1/4″ for a seamless look (the acrylic lenses cannot be bent). Taillights have dual intensity for taillights and turn-brake lights. Need only 1″ of clearance space behind the mounting surface. Weld-in or glass-in studs for mounting are included. Quality instructions. Lenses are only 1/2″ wide by 15-1/4″ long! Note that these are build-in kits requiring paint and body skills.
SKU: L58 -
Hot Rod Exterior Lighting, Hot Rod LED Brake Lights
Small (7-1/2″) Red Hot Slot LED Light Kit (L58SM)
Hot Rod Exterior Lighting, Hot Rod LED Brake LightsSmall (7-1/2″) Red Hot Slot LED Light Kit (L58SM)
Build-in, flush mount LED Light Kit with Red LED’s and Red lenses. 30 super bright Red LED’s premounted inside each aluminum housing. 1/4″ thick amber acrylic lenses with prismatic diffusers. Lights have dual intensity for use as running light and turn signal and brake ligh. Needs only 1″ of clearance space behind the mounting surface. Weld-in or glass-in studs for mounting are included. Lenses are 1/2″ wide X 7-1/2″ long.
SKU: L58SM -
Hot Rod Exterior Lighting
Flush Mounted LED Lights
Taillights with Separate Amber Turn Signals If you have turn signals that are separate from the brake lights, this kit is exactly what the doctor ordered. Each light has 40 super bright red LED’s that handle the taillight and brake light functions, plus an additional 12 super bright amber LED’s that are dedicated for turn signals. They are all mounted inside a ready-to-mount aluminum housing. The lenses are 1/4″ thick build-in, flush mount units that measure 15-1/4″ long X 1/2″ wide clear acrylic with prismatic diffusers. Please note that these are build-in lights that require paint and body skills. Not all vehicles with separate turn signals are adaptable to LED lights. Call or email us to discuss your application.
SKU: L58RACL -
Hot Rod Exterior Lighting
Double-D LED Taillights (L58-DDR)
Double-D taillights with twice the diodes. Two strips of 60 Super Bright Red LED’s per light, inside an aluminum housing. 1/4″ thick build-in, flush mounted red acrylic lenses with prismatic diffusers. Each strip is split 40-20 and the strips are wired separately so that you may wire the strips together or not. Work with integral turn/brake systems or vehicles with separate turn signals. The lenses are 1/2″ wide x 15-1/4″ long. Mounting hardware and dual intensity convertors included.
SKU: L58-DDR -
Hot Rod Exterior Lighting, Hot Rod LED Brake Lights
Small Double-D LED Taillights (L58SM-DDR)
Two strips of 30 Super Bright Red LED’s per light, inside an aluminum housing. 1/4″ thick build-in, flush mounted red acrylic lenses with prismatic diffusers. Each strip is split 20-10 and the strips are wired separately so that you may wire the strips together or not. Work with integral turn/brake systems or vehicles with separate turn signals. The lenses are 1/2″ wide x 7-1/2″ long. Mounting hardware and dual intensity convertors included. Sold in pairs.
SKU: L58SM-DDR
Frequently Asked Questions About Hot Rod Lighting
What types of lighting are available for hot rods at Watson’s StreetWorks?
Watson’s StreetWorks offers a wide range of hot rod lighting options, including LED headlights, taillights, and interior marker lights. We provide both functional and decorative lighting solutions, ensuring your vehicle looks as good as it performs, both inside and out.
Why should I consider upgrading to LED lights for my hot rod?
LED lights are preferred for hot rods due to their longer lifespan, improved brightness, and lower energy consumption compared to traditional bulbs. They provide enhanced visibility and safety while driving, and their durability makes them a cost-effective choice for long-term use.
How do I choose the right lights for my hot rod’s specific needs?
Choosing the right lights for your hot rod depends on several factors, including the specific model of your vehicle, desired aesthetic, and legal requirements. Consider what you primarily need the lights for—whether it's for improved visibility or aesthetic enhancement. It’s also important to check the compatibility of the lights with your vehicle’s existing electrical system.