Hot Rod Wiring Products
Showing 41–60 of 89 results
-
Remotes & Keyless Entry Systems
Booster Spring (L22-BS)
For those really tough original latches that need an extra “boost” to open, these springs will provide a preload on the latch mechanism so that less force is needed to release the latch. 4-1/2″ long zinc plated high-carbon steel springs have 4.40 pounds/inch of force. The cable connector allows you to adjust the pull to your needs.
SKU: L22-BS -
Remotes & Keyless Entry Systems
MagTech Magnet Entry System (L20)
The magnet is the “key” to this trick system. Just place the magnet close to the hidden switch and it will send power to your actuator, solenoid or any momentary switched mechanism. Complete with “keys”, switches, clips, 40-amp relays and a waterproof back-up button in case you misplace the keys.
Please Note: StreetWorks unique wiring plan assures that wires inside the doors are only “hot” when activated, providing added security from short circuits. Also, magnetic fields do not work through steel but the hidden switch can be put under the lip of a fender or running board, behind glass, plastic, fiberglass, aluminum, non-magnetic stainless trim, filler or any non-magnetic material. If you can’t figure out where to put the switch on your steel car, give us a call and we’ll help.
SKU: L20 -
Specialty Flashers & Relays
Digital Gear Shift Sending Unit (DK-GSS3000)
Now Self Adjusting!
Dakota Digital’s universal, adjustable gear shift indicator sending unit. Works with GM TH350, TH400, 700R4, 4L60, 4L80, and powerglide; Ford C-4, C-6 and AOD; Mopars and many others. Full electronic adjustability from inside the car – no magnets to align. Built-in neutral safety switch and reverse back-up light circuits. Comes complete with mounting hardware pack, electronic sending unit, and gear shift decoder. Works perfectly with StreetWorks LED Gear Shift Indicator Lights and Combination LED Turn Signal/ High Beam Shifter Indicator Lights.
SKU: DK-GSS2000 -
Hot Rod Wiring Products
H4 Headlight Harnesses (EL-HLP)
Are yourย 3 prong headlight haresses tired and falling apart?ย Pick up a pair of new harnesses with connectors and make sure you never lose your lights at night.ย Comes with 2 3 prong harnesses pre-wired with pigtails, connectors and instructions.
SKU: EL-HLP -
Specialty Flashers & Relays
Headlight Reminder Buzzer (32021)
There is nothing as embarrassing to a car guy as a dead battery because you left your lights on. This kit sounds our new Buzzer and the center lights red reminding you your lights are on but the key is either out of the ignition or in the off position. The kit includes the Buzzer, Module, and wiring instructions. Mounts in a 3/4″ hole and the chrome bezel is 7/8″
SKU: 32021 -
Hot Rod Ignition Switch Systems
Hot Rod Push Button Starter Switch Kit
Push our Ignition Switch button once and your accessory circuit comes on. A second push and hold engages the starter. When your engine starts just release the switch and your running as well as the LED indicator ring. Press it once more and everything turns off. This gorgeous Stainless steel (22MM) switch mounts in a 7/8″ diameter hole with the overall size of 1′.ย ย The compact ignition module can hide under your dash or in the engine bay.
This kit will work with our smaller (16MM) momentary push button but be warned guys; youโll be using your pinky.
Compare our price to any other Single Switch Ignition System anywhere! We were the first to bring this system to the street rod market and we know how to do it best!
Check out our full line of matching low profile, push button switches and indicator lights.
Note this unit requires securing your car. Check out our battery disconnects or simply install a hidden kill switch or, look at ourย RFID unit.
SKU: 12*** -
Hot Rod Ignition Security Systems
RFID Ignition Security Unit
This all new StreetWorks RFID is designed to work with your Hot Dot Ignition Systems or your existing key. ย This is the security system that your hot rod has been missing.
As you may already know the โHOT DOTโ ignition takes the place of your conventional โkeyedโ ignition switch however it has no security built in.ย This all new RFID Security system gives you the security and convenience that today’s society demands.
What is RFID?ย
RFID stands forย Radio-Frequency Identification. The acronym refers to small electronic devices that consist of a small chip and an antenna.ย The RFID device serves the same purpose as magnetic strip on the back of a credit card; it provides a unique identifier for that object. And, just as a magnetic strip must be scanned to get the information, the RFID device must be scanned to retrieve the identifying information.
The RFID unit has 3 different operating modes.
Mode 1:ย High security mode. The car only starts and stays running with the RFID fob in range.
Mode 2:ย Medium security mode. The RFID fob must be in range for car to start and will stay running until the operator turns it off, then it wonโt restart.
Mode 3:ย NO security mode. Should your fob become lost or damaged you can over-ride the system by entering a code with the hidden button switch.
The RFID is capable of working between 5 and 200 feet with the vehicleโs windows closed.ย If the vehicleโs windows are open we do not have a measurement for how far away the unit will work. ย There are 8 increments of sensitivity that the unit can be programmed to.
SKU: WI-RFID -
Remotes & Keyless Entry Systems
Hot Dot Remote Ignition Link
A great way to mount our L75 series switches – put an Ignition switch and an Accessory switch side-by-side. The plate is 1″ wide x 2″ long and secures with the switch nuts. L75 switches sold separately. This Ignition Link Relay allows you to enable and disable your StreetWorks Hot Dot Ignition Button using two (2) functions on a Remote Control (such as our Gemini, 2-function or other remote control). Push one remote control button and the Hot Dot Ignition operates, press a second button and disable the Hot Dot. Takes the place of a keylock to secure your car’s ignition. May be triggered by either positive or negative (grounding) momentary trigger signals. Remote Controls and Hot Dot sold separately. Can also be used as a latching On/Off relay, 12 vdc, 5 amps maximum load.
SKU: L88 -
Hot Rod Ignition Switch Systems, Hot Rod Ignition Switches
Aftermarket Ignition Switch with Billet O-Ring Nut (L47)
Hot Rod Ignition Switch Systems, Hot Rod Ignition SwitchesAftermarket Ignition Switch with Billet O-Ring Nut (L47)
We have seen a lot of really nice cars using the aftermarket ignition switch and the cast, ribbed nut that comes with it. That nut made the whole dash look cheap! So, let’s fix that. Here is a quality ignition switch with 30 amp rating. Four positions -Accessory, Off, On and Start. 2 keys. Die-cast housing and mounting stem that’s 3/4″ diameter x 3/4″ long. AND it has an attractive machined billet nut with decorative black O-ring. The perfect complement to our Contemporary Column nobs.
SKU: L47 -
-
Hot Rod Indicators, Relays & Flashers
Latching Double Throw Relay (30018)
This is just what you need to control your Hi/Lo headlight circuit.ย Once triggered by a momentary switch, it stays latched in that position.ย Trigger it again and it switches to the other position.ย The trigger circuit is ground on this relay.ย Kit includes lead wires and instructions.
**Works great with our 5 wire window switches**
SKU: 30018 -
-
Hot Rod Indicators, Relays & Flashers
Circuit Status Indicator Relay Kit
Ever have a circuit that you wanted specific feedback about – as to when it turned ON and OFF? This Relay kit, along with two indicator lights (not included) will give you that information. Our kit contains the relay, 24″ wire leads, and instruction for use. Works great for radiator fans, battery disconnects, fuel pump, etc. Use with any of our LED indicator lights (for example: green = ON, red = OFF) to provide positive, visual status indication (lights not included).
SKU: L07D-IND -
Hot Rod Wiring Products
LED Conversion Kit
Make any singleย intensity (BRIGHT ONLY) LED strip dual intensity (DIM andย BRIGHT) with one of these conversion kit. You will need one per strip depending on how many LED you have in each light. The L-JE02 Is rated for 25-60 RED LED’s and 12-32ย Amber LED’s. The L-JE03 Is rated for 5-20 RED LED’s and 4-8 AMBER LED’s. The L-JE01’s are used for Incandescent bulbs. NOTE These conversion kits are intended for use with our LED strips only. They will work with other manufacturerโs LED’s but we DO NOT guarantee that they will work.
SKU: L-JE0# -
Hot Rod Wiring Products
Dummy Load Resistor for LED Lights
When using LED’s for turn signals your regular flasher doesn’t work right anymore because the LED’s don’t pull enough amperage to trigger it. This “dummy load” resistor ย wires in parallel with the LED to add the necessary amperage draw. One dummy load per side is usually sufficient. (Sold only in Pairs)
SKU: L52DL2 -
Automotive Battery Disconnect Switches & Kits
Magtech Battery Disconnect (L27M)
“Instant ON, Instant OFF” A simple wand-like swipe with the magnet “key” makes it that easy to disconnect your battery with our MagTech Battery Disconnect kit. A hidden switch is activated by the magnet key carried on your key ring. Great as an anti-theft deterrent or to prevent battery drain. Includes our auxiliaryย “hot” feed to the clock or computer or other items requiring power for memory. The solenoid is rated 110 amps continuous duty and 750 amps surge. Hardware, wire, connectors and detailed instructions included. There is NO electricity used when this unit is “on”, only when switching between on and off.
SKU: L27M -
Take Your Vehicle to The Next Level With Hot Rod Wiring Projects
Looking for the best hot rod wiring kits and parts? Whether your latest hot rod electrical project calls for ignition switch systems or battery disconnects, Watson's StreetWorks has the finest hot rod wiring supplies for every kind of vehicle. You've probably put a lot of time into the outward appearance of your hot rod, and maybe now it's time to invest in some hot rod wiring upgrades to boost your enjoyment while cruising โ or to give you some peace of mind by protecting your investment.
Modernize Your Ride With Hot Rod Electrical Upgrades
If you are looking to give your ride a few 21st Century touches, Watson's StreetWorks has a variety of hot rod wiring options to choose from. To protect your car, you may want to try a remote control battery disconnect. With just the simple push of a button, battery disconnects serve as a great theft deterrent. Keeping your classic hot rod authentic may be a priority, but it's hard to argue against adding a keyless entry system. Power door locks and power windows make it much easier and more comfortable to cruise in style. With a simple hot rod wiring kit, we can help you ride in comfort and style, and let you sleep easy knowing your vehicle is safe.
Does Watson's Offer Hot Rod Wiring Harness Kits?
At Watson's StreetWorks, you'll find a wide selection of wiring harness kits for hot rods of all makes and models. We've got harness kits for wipers, radios, heat, cell phone chargers, lights and more, along with universal hot rod wiring harness kits.
Can Wire Routing Help With My Hot Rod Wiring Upgrade?
Wire routing is a quick and easy way to keep your electrical job simple and organized. Routing attaches the hot rod wire bundles to the car's firewall, door or panel. We offer a range of wire pass-throughs and wire looms to keep those unsightly hot rod wires under control.
Can Your Hot Rod Electrical Experts Help Me With Push Button Start?
Watson's StreetWorks has a selection of ignition switches in our online store for you to browse and see if one works for your needs. Our prices are tough to beat, and so is our service. If you have any questions about our ignition switches or any of our hot rod wiring kits, please contact our team of experts who are happy to answer any questions you may have.
Find the High-Quality Hot Rod Wiring Parts You Need at Watson's StreetWorks
Hot rod wiring projects can be complicated. Let Watson's StreetWorks help keep things simple with our full selection of industry-leading hot rod wiring kits and supplies. We have more than 30 years of automotive experience in providing the best hot rod electrical products. If you're not quite sure what you need or if you have any questions, contact our team of experts today. We're always here to help you get the most out of your hot rod.