billet
Showing 1–20 of 63 results
-
Hot Rod & Automotive Interior Display Trim
Backup Monitor Console Camera
A Backup Screen for Your Console!
When we introduced our mirror /screen backup system it was a huge success but many folks need a unit for their center console. Well here it is. The large 5″ screen is mounted in a billet frame measuring 5-ยผ” wide by 4″ tall. You will need less than an inch of backspace. Sold with either a through hole or license plate mounted camera.
SKU: IT-MON-TH -
Hot Rod & Automotive Interior Display Trim
License Plate Mounted Backup Camera Monitor (IT-MON-LP)
A Backup Screen for Your Console!
When we introduced our mirror /screen backup system it was a huge success but many folks need a unit for their center console. Well here it is. The large 5″ screen is mounted in a billet frame measuring 5-ยผ” wide by 4″ tall. You will need less than an inch of backspace. Sold with either a through hole or license plate mounted camera.
SKU: IT-MON-LP -
Custom Switches for Hot Rods
Custom Automotive Switches
Weโve been working with builders for 30 years and know that no 2 builds are identical.
Every builder wants to customize and personalize their project.
One of the most prominent ways to display your own personality is in the switch panel you use.
Once you decide on the functions of the switches, you can further personalize them with engraving, lighting, brushed or polished or black anodized finish.
Mixing and matching the finish is another creative option.
The following pictures are a sampling of the many ways customers have personalized their switch panels.
We can engrave with symbols or words or just about anything else you want.
Call us to discuss how we can turn your ideas into reality and build a custom panel that is as unique as your ride!
SKU: n/a -
Custom Hot Rod Switch Panels, Custom Switches for Hot Rods
GT4D Modular Switches
The modular design of the switch face lets us build you a custom switch panelย toย controlย just about anything.ย Whether you want a single switch to turn on a dome light or a bank of 20 to run everything in the car we can do it.
The switches are all machined from billet aluminum and have a brushed finish. The actual switch can be either momentary-off-momentary or on-off-on.ย All switches are rated at 5 amps so you may want relays for heavy loads. (see page 39) Want lights? We can add 1 or 2 lights to each switch in your choice of colors. The switch panels are 1 3/4โ tall. A single switch isย 1 5/8โ long. Each additional switch adds 1 1/8โ.ย ย ย (for example a 6 switch panel is 7 3/8โ long) The toggle is 5/8โ tall.
The GT4D series include the dividers to safeguard those important circuits from accidently being switched.ย The GT3 series are without dividers. We can mix the 2 on a single panel as shown on the right.
ISO Symbols, custom engraving and black anodizing isย available upon request.
Donโt know if you have Polarity reversing Motors?ย See the Product Instructions Tab to determine if your motors are Polarity reversing or Non-Polarity reversing.
GT4D Switches with dividers
Single GT4D switchย ย ย ย ย ย 10010โฆโฆ$145.00
Double GT4D switchย ย ย ย 10021โฆโฆ$290.00
3 switch panel of GT4D 10032โฆ..$425.00
4 switch panel of GT4D 10043โฆ..$565.00
5 switch panel of GT4D 10054โฆ..$695.00
6 switch panel of GT4D 10064โฆ..$825.00
7 switch panel of GT4D 10075โฆ..$950.00
We have shown pricing here for 1 to 7 switches. We can build longer panels, just call us for a quote.
Want lights? We have them in green, red, amber and blue. Add $7.00 for each light. Be sure to tell us how you want the lights to function. We can wire up exactly what you need. If you want some dividers but not on every switch give us call and we’ll price it for you.ย ย Once again, donโt forget your relays.ย We have polarity reversing, latching, single pole units to help keep your circuits
SKU: GT4D -
Custom Hot Rod Switch Panels, Custom Switches for Hot Rods
20 Amp Custom 2 Rocker Car Switch Panel
Our newly designed SS family of switches do it all. Just let us know if you need on-off-on or momentary and weโll build the ideal switch panel for you.ย Rated at 20 amps you wonโt need relays for most circuits. The lights are a separate circuit so you decide when they are lit. We can even mix finishes if youโd like. Rectangular face-plates are currently available for 1 to 4 switches. Continue to check this page as weโll soon be offering ovals panels as well. Like our other switches, they are available in Brushed, Polished or Raven Black anodized finishes. Choose from our dimpled Infinity style or the sharper edged Chiseled rockers to get the perfect look for your build. Switch faces are 2-ยฝ” tall, Double switches are 2-1/2″ long. You will need 1-ยพ” of back space.ย Switches come with lead wires attached, mounting clips and instructions. There are literally thousands of combinations available and when we add engraving the switch we build for you will be truly unique to your ride. Along with choosing when the rocker lights are on we can also change them from white to most common colors.
Engraving on the rockers or face-plates is also available.
Donโt know if you have Polarity reversing Motors?ย See the Product Instructions Tab to determine if your motors are Polarity reversing or Non-Polarity reversing.
Give us a call at 866-859-0513 and weโll be glad to discuss your switching needs.
Pricing starting at $184.ย ย
SKU: n/a -
Custom Hot Rod Switch Panels, Custom Switches for Hot Rods
20 Amp 3 Custom Rocker Switch Panel
Our newly designed SS family of switches do it all. Just let us know if you need on-off-on or momentary and weโll build the ideal switch panel for you.ย Rated at 20 amps you wonโt need relays for most circuits. The lights are a separate circuit so you decide when they are lit. We can even mix finishes if youโd like. Rectangular face-plates are currently available for 1 to 4 switches. Continue to check this page as weโll soon be offering ovals panels as well. Like our other switches, they are available in Brushed, Polished or Raven Black anodized finishes. Choose from our dimpled Infinity style or the sharper edged Chiseled rockers to get the perfect look for your build. Switch faces are 2-ยฝ” tall, 3 switch face is 3-5/8″long. You will need 1-ยพ” of back space.ย Switches come with lead wires attached, mounting clips and instructions. There are literally thousands of combinations available and when we add engraving the switch we build for you will be truly unique to your ride. Along with choosing when the rocker lights are on we can also change them from white to most common colors.
Engraving on the rockers or face-plates is also available.
Donโt know if you have Polarity reversing Motors?ย See the Product Instructions Tab to determine if your motors are Polarity reversing or Non-Polarity reversing.
Give us a call at 866-859-0513 and weโll be glad to discuss your switching needs.
Pricing starting at $280.ย
SKU: n/a -
Custom Hot Rod Switch Panels, Custom Switches for Hot Rods
20 Amp Custom 4 Toggle Switch Panel
Our newly designed SS family of switches do it all. Just let us know if you need on-off-on or momentary and weโll build the ideal switch panel for you.ย Rated at 20 amps you wonโt need relays for most circuits. The lights are a separate circuit so you decide when they are lit. We can even mix finishes if youโd like. Rectangular face-plates are currently available for 1 to 4 switches. Continue to check this page as weโll soon be offering ovals panels as well. Like our other switches, they are available in Brushed, Polished or Raven Black anodized finishes. Choose from our dimpled Infinity style or the sharper edged Chiseled rockers to get the perfect look for your build. Switch faces are 2-ยฝ” tall, 4 switch face is 4-3/4″ long. You will need 1-ยพ” of back space.ย Switches come with lead wires attached, mounting clips and instructions. There are literally thousands of combinations available and when we add engraving the switch we build for you will be truly unique to your ride. Along with choosing when the rocker lights are on we can also change them from white to most common colors.
Engraving on the rockers or face-plates is also available.
Donโt know if you have Polarity reversing Motors?ย See the Product Instructions Tab to determine if your motors are Polarity reversing or Non-Polarity reversing.
Give us a call at 866-859-0513 and weโll be glad to discuss your switching needs.
Pricing starting at $357.ย
SKU: n/a -
Custom Hot Rod Switch Panels, Custom Switches for Hot Rods
20 Amp Custom Toggle Switch
Our newly designed SS family of switches do it all. Just let us know if you need on-off-on or momentary and weโll build the ideal switch panel for you.ย Rated at 20 amps you wonโt need relays for most circuits. The lights are a separate circuit so you decide when they are lit. We can even mix finishes if youโd like. Rectangular face-plates are currently available for 1 to 4 switches. Continue to check this page as weโll soon be offering ovals panels as well. Like our other switches, they are available in Brushed, Polished or Raven Black anodized finishes. Choose from our dimpled Infinity style or the sharper edged Chiseled rockers to get the perfect look for your build. Switch faces are 2-ยฝ” tall, single switches are 1-3/8″wide. You will need 1-ยพ” of back space.ย Switches come with lead wires attached, mounting clips and instructions. There are literally thousands of combinations available and when we add engraving the switch we build for you will be truly unique to your ride. Along with choosing when the rocker lights are on we can also change them from white to most common colors.
Engraving on the rockers or face-plates is also available.
Donโt know if you have Polarity reversing Motors?ย See the Product Instructions Tab to determine if your motors are Polarity reversing or Non-Polarity reversing.
Give us a call at 866-859-0513 and weโll be glad to discuss your switching needs.
Pricing starting at $110.ย ย
SKU: n/a -
Custom Switches for Hot Rods
Manual Cancelling L75 Turn Kit (L75TS-XX)
Get our beautiful L75 series switches in a Manual-Canceling Turn Signal Switch Kit. They have built-in ring LED’s. Specify LED color: blue, green, red or white and switch color: chrome or black casings. ย Good looking switches control 40 amp brake light override circuitry to let you use a single brake/turn bulb (such as an 1157 bulb). Mount in the dash or console. Wire leads, instructions and schematic. (Uses a single two-prong flasher, not provided.) Now with our new compact Turn Signal Module – just 1-1/2″ square X 7/8″ high.
SKU: L75TS-XX -
Automotive Switches and Buttons
Illuminated Billet Push Button Switches (L75)
Illuminated Push Button Switches
These gorgeous low profile switches may be used for a variety of Momentary or ON/Off (latching) switch functions.ย The LED illumination ring is separately controlled so it can be used as a circuit power indicator or as a locator light that is powered by the vehicle lights. They can be positive (+) or ground (-) switching.
- These switches are available in either Momentary or On/Off (Latching) style switches.
- All switches are available in Blue, Green, Red or White LED illumination.
- The switches are available in either a Chrome or Black finish.
- And, theyโre available in either a Small or Large size (see below for description).
The Small switch mounts in a .625 inch (5/8โ / 16MM) diameter hole and rated at 3 amps maximum. The face diameter is ยพโ. For jobs that require higher amperage, please take a look at our relays.
The Large switch mounts in a .875 inch (7/8โ / 22MM) diameter hole and rated at 5 amps maximum. The face diameter is just under 1โ. For jobs that require higher amperage, please take a look at our relays.
Available in either Momentary or On/Off functions!
Engraving is available upon request.
SKU: n/a -
Automotive Switches and Buttons
Billet Face Plates for Our SMALLER L75 Series Switches
THESE ARE FACE PLATES ONLY. MUST ORDER THE SWITCHES SEPARATELY
A great way to mount our L75 series switches (switches sold separately) – put an Ignition switch and an Accessory switch side-by-side. The plate is 1 ” wide x 2 ” long (or more) and secures with the switch nuts. L75 switches sold separately. (These face plates will not work with our largerย L75 switches)
SKU: L75-FP -
Hot Rod Power Window Switches
Universal SS Power Window Switches (PW-5), Rectangle
These new power window switches match our new SS family. We include the polarity reversing module so these switches will work with all modern power windows.ย The lights are a separate circuit so you decide when they are lit.ย Like our other switches, they are available in brushed, polished or Raven Black anodized finishes. Choose from our dimpled Infinity style or the sharper edged Chiseled rockers to get the perfect look for your build. Switch faces are 2-ยฝ” tall, single switches are 1-3/8″ wide and doubles are 2-ยฝ”. You will need 1-ยพ” of back space.ย Switches come with lead wires, polarity reversing modules, mounting clips and instructions.ย The triple kit has a double switch on the driverโs door, a single for the passenger and includes cross-over wiring. Use a double alone when center mounting your switches.
Donโt know if you have Polarity reversing Motors?ย See the Product Instructions Tab to determine if your motors are Polarity reversing or Non-Polarity reversing.
Engraving on the rockers or faceplates is also available. Contact us for polished and engraved pricing.
SKU: PW-5 -
Hot Rod Power Window Switches
Universal SS Oval Power Window Switches (PW-5O), Oval
These new power window switches match our new SS family. We include the polarity reversing module so these switches will work with all modern power windows.ย The lights are a separate circuit so you decide when they are lit.ย Like our other switches, they are available in brushed, polished or Raven Black anodized finishes. Choose from our dimpled Infinity style or the sharper edged Chiseled rockers to get the perfect look for your build.ย single switches are 2-5/16″ T 3-1/4″ W. doubles are 2-5/8″ T 4-3/16 W. Three switch plates are 2-5/8″ T 4-7/8″ W. Four switch is 5-3/8″ T 3-7/16″ W. You will need 1-ยพ” of back space.ย Switches come with lead wires, polarity reversing modules, mounting clips and instructions.ย The triple kit has a double switch on the driverโs door, a single for the passenger and includes cross-over wiring. ย Use a double alone when center mounting your switches.
SKU: PW-5O -
Hot Rod Power Window Switches
Single Billet Power Window Switch (L39BS#), Rectangle
Our Billet 3-wire power window rocker switch sits in a billet frame that’s only 1-1/8″ wide by 1-3/4″ high. Adapt directly to positive (+) output remotes – no extra relays required!
Single Switch
Includes: Single switch & frame, polarity reversing module, wire leads and instructions.
Donโt know if you have Polarity reversing Motors?ย See the Product Instructions Tab to determine if your motors are Polarity reversing or Non-Polarity reversing.
SKU: L39BS# -
Hot Rod Power Window Switches
Double Billet Power Window Switch (L39BD#), Rectangle
Our dual power window rocker switch sits inside an billet frame that’s only 2″ wide by 1-3/4″ high. Adapt directly to positive (+) output remotes – no extra relays required!
Dual Switch
Dual switch kit for center console mounting or for both switches on the driver door only.
Kit includes: Dual switch frame with swithes, (2) polarity reversing modules, wire leads and instructions.
Available with either a dimpled or paddle style rocker.ย Switch and frame have a brushed aluminum finish.
Donโt know if you have Polarity reversing Motors?ย See the Product Instructions Tab to determine if your motors are Polarity reversing or Non-Polarity reversing.
SKU: L39BD# -
Hot Rod Power Window Switches
Triple billet Power Window Switch kit (L39BT#)
Triple Switch
Triple kit puts dual switches on the driver door and one on the passenger door. Switches and frames, (2) polarity reversing modules, lots of wire and instructions.
Kit includes: (1)Dual switch frame with switches, (1) single switch & frame, (2) polarity reversing modules, wire leads and instructions.
Available with either a dimpled or paddle style rocker.ย Switch and frame have a brushed aluminum finish.
Donโt know if you have Polarity reversing Motors?ย See the Product Instructions Tab to determine if your motors are Polarity reversing or Non-Polarity reversing.
SKU: L39BT# -
Hot Rod Power Window Switches
Oval Billet Power Window Toggle Switch
Our Billet 3-wire rocker switch sits inside an Oval billet frame that’s only 1-5/8″ wide by 2-1/4″ high. Adapt directly to positive (+) output remotes – no extra relays required!
Single Switch
Single switch / frame, polarity reversing module, wire leads and instructions.
Dual Switch
Dual switch kit for center console mounting or for both switches on the driver door only. Dual switch frame is 3-1/8″ wide by 1-5/8″ high, (2) polarity reversing modules, wire leads and instructions.
Triple Switch
Triple kit puts dual switches on the driver door and one on the passenger door. Switches and frames, (2) polarity reversing modules, lots of wire and instructions.
Donโt know if you have Polarity reversing Motors?ย See the Product Instructions Tab to determine if your motors are Polarity reversing or Non-Polarity reversing.
NOTE:
These are not plug-in replacements for 5-wire switches. Call if you have questions. Reversing modules are needed for power windows. Switches without modules will work for air-ride systems with separate up – down solenoids requiring a positive signal.
SKU: L39BO -
Custom Hot Rod Switch Panels, Hot Rod Power Window Switches
Dimpled Aftermarket Universal Power Window Switch Kit
Custom Hot Rod Switch Panels, Hot Rod Power Window SwitchesDimpled Aftermarket Universal Power Window Switch Kit
3 Switch Panel
A single location (console) 3 switch control panel that measures ย 2 – 3/4″ wide by 1ย – 5/8″ high.
Includes 60″ of lead wires, connectors and instructions. The switch frame mounts with (4) blind studs from behind.
Switches are rated at 5 amps max. ย Please use relays if you’re 5 amps or more. ย Polarity reversing modules are required for 2 wire non grounded window kits.
Donโt know if you have Polarity reversing Motors?ย See the Product Instructions Tab to determine if your motors are Polarity reversing or Non-Polarity reversing.
SKU: L39B3X -
Custom Hot Rod Switch Panels, Hot Rod Power Window Switches
Rectangular Paddle Power Window Switch Kit for 3 Regulators (L39B3XP)
Custom Hot Rod Switch Panels, Hot Rod Power Window SwitchesRectangular Paddle Power Window Switch Kit for 3 Regulators (L39B3XP)
3 Switch Panel
A single location (console) 3 switch control panel that measuresย 2 – 3/4″ wide by 1ย – 5/8″ high.
Includes 60″ of lead wires, connectors and instructions. The switch frame mounts with (4) blind studs from behind.
Switches are rated at 5 amps max. ย Please use relays if you’re 5 amps or more. ย Polarity reversing modules are required for 2 wire non grounded window kits.
Donโt know if you have Polarity reversing Motors?ย See the Product Instructions Tab to determine if your motors are Polarity reversing or Non-Polarity reversing.
SKU: L39B3XP -
Custom Hot Rod Switch Panels, Hot Rod Power Window Switches
Oval Dimpled Power Window Switch Kit for 3 Regulators (L39BO3X)
Custom Hot Rod Switch Panels, Hot Rod Power Window SwitchesOval Dimpled Power Window Switch Kit for 3 Regulators (L39BO3X)
3 Switch Panel
A single location (console) 3 switch control panel that measures 4″ wide by 1ย -5/8″ high.
Includes 60″ of lead wires, connectors and instructions. The switch frame mounts with (4) blind studs from behind.
Switches are rated at 5 amps max. ย Please use relays if you’re 5 amps or more. ย Polarity reversing modules are required for 2 wire non grounded window kits.
SKU: L39BO3X
