billet
Showing 41–60 of 63 results
-
Custom Hot Rod Switch Panels, Hot Rod Power Window Switches
4-Door Hot Rod Paddle Rocker Power Window Switch Kit
Custom Hot Rod Switch Panels, Hot Rod Power Window Switches4-Door Hot Rod Paddle Rocker Power Window Switch Kit
Beautiful billet 3ย wire power window switches now in kits for 4-door cars.ย Comes withย paddleย rockers.ย
Kit includes: 4 switchย panel for the driver’s door and 3 single switch panels for each of the other doors.ย Includes polarity reversing modules,ย wiring connectors switches and panels with instructions.
Donโt know if you have Polarity reversing Motors?ย See the Product Instructions Tab to determine if your motors are Polarity reversing or Non-Polarity reversing.
SKU: L39BO4DRP -
-
-
Wire Routing for Hot Rods
Billet Wire Port (B16)
Here is a great way to dress up the area of the firewall where the wiring harness goes through. The Wire Port main body is 2″ dia. with a 1-1/2″ inside dia. and is secured to the firewall around the wire bundle hole with four (4) truss head screws. A 1″ x 13/16″ deep cut-out in the Wire Port body allows the wire bundle to exit close to the firewall (a rubber grommet is included for smaller wire bundles). The body is then capped off with an attractive machined cover which has three (3) ball-milled grooves. The design allows for the wire bundle to be installed before the final attachment of the Wire Port is done. Attractive, functional and at a very reasonable price.
SKU: B16 -
Wire Routing for Hot Rods
Billet Wire Pass-through (B21)
A really attractive way to dress up the area where the wires come through the firewall. Unit measures 1-1/2″ wide X 2″ tall X 1″ deep with a wire exit size of 1″ wide X 3/4″ deep. Blind fastens from behind for that smooth look. Hardware and template included.
SKU: B21 -
Wire Routing for Hot Rods
Billet ECU Wire Pass Through (WI-001)
An attractive cover with machined grooves to dress up where wire bundles pass through the firewall. ย This wire pass through was designed with large Fuel Injection harnesses in mind. ย The pass through comes with a fitted grommet with a 1″ precut split top hole for ease of installation and can be trimmed. ย The grommet can be opened up to a maximum of 1 5/8″ and has relief cuts to assist with trimming. ย The design of the pass through allows this piece to be added onto a completed vehicle with minimum effort.
Overall dimensionsย are 4 5/8″ tallย x 2 1/4″ wide xย 11/32″ deep on top andย 2 1/8″ deep on bottom. ย
Inside dimensions are 3 3/4″ tall x 1 3/4″ wideย x 5/8″ deep on top and 1 15/16″ deep on bottom.
SKU: WI-001 -
-
Automotive Switches and Buttons
L75-22 Series Switch Billet Face Plate
THESE ARE FACE PLATES ONLY. MUST ORDER THE ย SWITCHES SEPARATELY
Show off our L75-22 series switches (switches sold separately) – put an Ignition switch and an Accessory switch side-by-side or do a multiple of switching functions. The plates are 1-1/4″” wide and secures with the switch nuts.ย
We can do almost anything that you want to with these switches. Give us a call to discuss your needs.
SKU: L75-22FP -
Custom Door Hardware, Windows Cranks & Switch Knobs
Billet Levers for Car Locks
All of the power and manual safety locks come with a plastic lever for the manual release. But your car has all the billet goodies! Match it all up with these beautiful billet aluminum levers. Fit 1/4″ shaft with set screw.
SKU: B-RHL -
-
Hood and Trunk Hinges
Bilt-Rite Billet Hinges from Sachse Rod Shop (SA-BH)
The patented Bilt-Rite hinges from Sachse Rod Shop are designed to separate the surfaces while pivoting open. No more rubbing or wearing off paint. These are quality, classy, and versatile. Made of 6061 T-6 aluminum. Can be used in any vertical attachment application like hoods, trunks, tilt front ends, pickup tonneau covers, etc.
Available in 2 sizes. The smaller sets which are 5 1/2″ tall by 7″ long. ย The Large hinges are 7″ tall bt 8 3/4″
SKU: SA-BH -
Hood and Trunk Hinges
Billet Trunk Hinge Kit (CA-BTHK)
Billet Trunk Hinge Kit from Carolina Custom. 6061 T -6 aluminum hinges. Decorative ball milled design. Stainless steel attaching screws. Includes installation kit with 36″ bracket (part in photo is smaller for photographic purposes, bracket may be shortened to fit your specific application), pivot pins, and tabs for pivot pins. Instructions.
SKU: CA-BTHK -
Hot Rod & Automotive Interior Display Trim
Dual Port Billet USB charger and Volt Meter (IT-USB)
This beautiful Billet USB Charger and Volt Meter will charge 2 phones or other devices while you’re on the road. It measures 1 ยพโ dia. face, 2 ยฝโ deep, and fits in a 1 ยฝโ hole. This handy unit also checks the vehicleโs voltage.
The LED Display shows the power/charging status of the device(s) plugged into it. Both ports are high output ports. Capable of pushing 2.4ย amps per port and has the typical USB charger of 5.0 volts.
Product comes with wires, mounting bracket and screws and, instructions.
SKU: IT-USB -
Hot Rod & Automotive Interior Display Trim
Dual Port USB charger / Volt Meter with Polished Aluminum Face (IT-USBP)
Hot Rod & Automotive Interior Display TrimDual Port USB charger / Volt Meter with Polished Aluminum Face (IT-USBP)
This is our beautiful brushed Billet USB Charger and Volt Meter with a polished aluminum face. It will charge 2 phones or other devices while you’re on the road. It measures 1 ยพโ dia. face, 2 ยฝโ deep, and fits in a 1 ยฝโ hole. This handy unit also checks the vehicleโs voltage.
The LED Display shows the power/charging status of the device(s) plugged into it. Both ports are high output ports. Capable of pushing 2.4 amps per port and has the typical USB charger of 5.0 volts.
Product comes with wires, mounting bracket and screws and, instructions.
SKU: IT-USBP -
Custom Door Hardware, Windows Cranks & Switch Knobs
Billet Switch Nut with O-Ring for Headlight Switch (B-HLSN)
Custom Door Hardware, Windows Cranks & Switch KnobsBillet Switch Nut with O-Ring for Headlight Switch (B-HLSN)
Have that headlight switch match with our ignition switch by adding a Billet Headlight Switch Nut with O-Ring. Perfect for part #AA-HLS.ย Has 7/16 – 28 thread and .203 Dia center hole.
SKU: B-HLSN -
Hot Rod Ignition Switch Systems
Hot Rod Push Button Starter Switch Kit
Push our Ignition Switch button once and your accessory circuit comes on. A second push and hold engages the starter. When your engine starts just release the switch and your running as well as the LED indicator ring. Press it once more and everything turns off. This gorgeous Stainless steel (22MM) switch mounts in a 7/8″ diameter hole with the overall size of 1′.ย ย The compact ignition module can hide under your dash or in the engine bay.
This kit will work with our smaller (16MM) momentary push button but be warned guys; youโll be using your pinky.
Compare our price to any other Single Switch Ignition System anywhere! We were the first to bring this system to the street rod market and we know how to do it best!
Check out our full line of matching low profile, push button switches and indicator lights.
Note this unit requires securing your car. Check out our battery disconnects or simply install a hidden kill switch or, look at ourย RFID unit.
SKU: 12*** -
Wire Routing for Hot Rods
Nylon and Billet Door Wire Looms (TP-NYLON-1/2)
The look of Billet & Black, the door looms are 1/2″ O.D. x 3/8″ I.D. x 7+” effective length. 1 One fixed and one sliding aluminum boss. Plastic lined. 1 Mount into 3/4″ and 5/8″ Diameter holes with set screw secured “quick” collars.
SKU: TP-NYLON-1/2 -
Hot Rod Power Window Switches
Light Clip for L39B Switches (L39B-Clip)
Now you can add illumination to any of our family of L39B Power Window and specialty switches. This Clip secures to the switch frame mounting screws and holds your choice of 5/32″ size LED (alsoย sold separately). The LED shines between the billet rocker and face plate of the switch. We recommend using oneย clips on each side of theย switch, for example for aย L39BODย switch panel witch is a 2 switch panelย using 3 clips would project an equal amount of light across the panel.
SKU: L39B-Clip
