dual
Showing all 3 results
-
Hot Rod Cup Holders
Pop Out Dual Cup Holder with Black Plastic Face (43064)
The guts of this slick German engineered unit come directly from the factory. Mount our included bracket behind your dash and just slide this baby in. Also can be mounted under the dash, built into a bench seat or a center console. You will need a spot that’s 7 3/4″ wide, 1 1/4″ tall and 5 1/4″ deep.
SKU: 43064 -
Hot Rod & Automotive Interior Display Trim
Dual Port USB charger / Volt Meter with Polished Aluminum Face (IT-USBP)
Hot Rod & Automotive Interior Display TrimDual Port USB charger / Volt Meter with Polished Aluminum Face (IT-USBP)
This is our beautiful brushed Billet USB Charger and Volt Meter with a polished aluminum face. It will charge 2 phones or other devices while you’re on the road. It measures 1 ¾” dia. face, 2 ½” deep, and fits in a 1 ½” hole. This handy unit also checks the vehicle’s voltage.
The LED Display shows the power/charging status of the device(s) plugged into it. Both ports are high output ports. Capable of pushing 2.4 amps per port and has the typical USB charger of 5.0 volts.
Product comes with wires, mounting bracket and screws and, instructions.
SKU: IT-USBP -
Hot Rod Handle Switch Kits and Power Window Crank Switches
Dual Power Window Controller (PW-DWC)
Crank handle switches are great but not if the driver can’t control the passenger’s window. Leave it to Watsons StreetWorks to finally come up with a solution. Mount this dual controller box under your dash and run wires to both front doors. The passenger switch functions normally until the driver takes over. The drivers switch operates in 3 modes. By just holding the switch up or down the driver’s window responds normally. If the driver first gives the switch a single quick tap it is now controlling the passenger window for the next 20 seconds. By giving the switch 2 quick taps BOTH windows operate together for the next 20 seconds. The unit returns to normal function after the 20 seconds. Works with all power window switches, not just crank handles. Install into your new build or retro-fit into existing builds. Want your windows operating from a remote? This unit works with the remote as well so you can control both front windows with just 2 buttons on the remote. Includes built in relays, enough wire to reach both doors; connectors and instructions.
Note: This unit is not compatible with our Express Window Module.
SKU: PW-DWC
